This reverts commit 13dd614cd1.
This breaks a g3 Typescript compilation tests where diagnostics are
expected for a missing input in the component.
PR Close#49467
Adds support for marking a directive input as required. During template type checking, the compiler will verify that all required inputs have been specified and will raise a diagnostic if one or more are missing. Some specifics:
* Inputs are marked as required by passing an object literal with a `required: true` property to the `Input` decorator or into the `inputs` array.
* Required inputs imply that the directive can't work without them. This is why there's a new check that enforces that all required inputs of a host directive are exposed on the host.
* Required input diagnostics are reported through the `OutOfBandDiagnosticRecorder`, rather than generating a new structure in the TCB, because it allows us to provide a better error message.
* Currently required inputs are only supported during AOT compilation, because knowing which bindings are present during JIT can be tricky and may lead to increased bundle sizes.
Fixes#37706.
PR Close#49453
This reverts commit 1a6ca68154.
This breaks tests in google3 which might be depending on private APIs. We
need to update these tests before we can land this PR.
PR Close#49449
Adds support for marking a directive input as required. During template type checking, the compiler will verify that all required inputs have been specified and will raise a diagnostic if one or more are missing. Some specifics:
* Inputs are marked as required by passing an object literal with a `required: true` property to the `Input` decorator or into the `inputs` array.
* Required inputs imply that the directive can't work without them. This is why there's a new check that enforces that all required inputs of a host directive are exposed on the host.
* Required input diagnostics are reported through the `OutOfBandDiagnosticRecorder`, rather than generating a new structure in the TCB, because it allows us to provide a better error message.
* Currently required inputs are only supported during AOT compilation, because knowing which bindings are present during JIT can be tricky and may lead to increased bundle sizes.
Fixes#37706.
PR Close#49304
The decorator downlevel transform is never used for actual class
decorators because Angular class decorators rely on immediate execution
for JIT. Initially we also supported downleveling of class decorators
for View Engine library output, but libraries are shipped using partial
compilation output and are not using this transform anymore.
The transform is exclusively used for JIT processing, commonly for
test files to help ease temporal dead-zone/forward-ref issues. We can
remove the class decorator downlevel logic to remove technical debt.
PR Close#49351
Consider the following scenario:
1. A TS file with a component and templateUrl exists
2. The template file does not exist.
3. First build: ngtsc will properly report the error, via a FatalDiagnosticError
4. The template file is now created
5. Second build: ngtsc still reports the same errror.
ngtsc persists the analysis data of the component and never invalidates
it when the template/style file becomes available later.
This breaks incremental builds and potentially common workflows
where resource files are added later after the TS file is created. This
did surface as an issue in the Angular CLI yet because Webpack requires
users to re-start the process when a new file is added. With ESBuild
this will change and this also breaks incremental builds with
Bazel/Blaze workers.
To fix this, we have a few options:
* Invalidate the analysis when e.g. the template file is missing. Never
caching it means that it will be re-analyzed on every build iteration.
* Add the resource dependency to ngtsc's incremental file graph. ngtsc
will then know via `host.getModifiedResources` when the file becomes
available- and fresh analysis of component would occur.
The first approach is straightforward to implement and was chosen here.
The second approach would allow ngtsc to re-use more of the analysis
when we know that e.g. the template file still not there, but it
increases complexity unnecessarily because there is no **single**
obvious resource path for e.g. a `templateUrl`. The URL is attempted
to be resolved using multiple strategies, such as TS program root dirs,
or there is support for a custom resolution through
`host.resourceNameToFileName`.
It would be possible to determine some candidate paths and add them to
the dependency tracker, but it seems incomplete given possible external
resolvers like `resourceNameToFileName` and also would likely not have
a sufficient-enough impact given that a broken component decorator is
not expected to remain for too long between N incremental build
iterations.
PR Close#49184
The options to generate NgFactory and NgSummary files were added to Ivy for backwards compatibility with ViewEngine. Since ViewEngine was deprecated and removed, the NgFactory and NgSummary files are no longer used as well.
This commit drops obsolete options to generate NgFactory and NgSummary files. Also, the logic that generates those files is also removed.
PR Close#48268
Fixes that the expression converter was producing code that throws a runtime error if a non-null assertion is used as a part of a safe read, write or call.
Fixes#48742.
PR Close#48801
Reworks some of the existing compiler APIs to make them easier to use in a schematic and exposes a few new ones to surface information we already had. High-level list of changes:
* `getPotentialImportsFor` now requires a class reference, instead of a `PotentialDirective | PotentialPipe`.
* New `getNgModuleMetadata` method has been added to the type checker.
* New `getPipeMetadata` method has been added to the type checker.
* New `getUsedDirectives` method has been added to the type checker.
* New `getUsedPipes` method has been added to the type checker.
* The `decorator` property was exposed on the `TypeCheckableDirectiveMeta`. The property was already present at runtime, but it wasn't specified on the interface.
PR Close#48730
In #47167 an `updateClassDeclaration` call was swapped out with a `createClassDeclaration` which caused a regression where interface references were being retained when using a custom decorator in a project that has `emitDecoratorMetadata` enabled.
These changes switch back to use `updateClassDeclaration`.
Fixes#48448.
PR Close#48638
Allows for self-closing tags to be used for non-native tag names, e.g. `<foo [input]="bar"></foo>` can now be written as `<foo [input]="bar"/>`. Native tag names still have to have closing tags.
Fixes#39525.
PR Close#48535
This is basically a pre-step for combining devmode and prodmode into a
single compilation. We are already achieving this now, and can claim
with confidence that we reduced possible actions by half. This is
especially important now that prodmode is used more often, but rules
potentially still using the devmode ESM sources. We can avoid double
compilations (which existed before the whole ESM migration too!).
We will measure this more when we have more concrete documentation
of the changes & a better planning document.
Changes:
* ts_library will no longer generate devmode `d.ts`. Definitions are
generated as part of prodmode. That way only prodmode can be exposed
via providers.
* applied the same to `ng_module`.
* updates migrations to bundle because *everything* using `ts_library`
is now ESM. This is actually also useful in the future if
schematics rely on e.g. the compiler.
* updates schematics for localize to also bundle. similar reason as
above.
PR Close#48521
Since the Bazel setup in this repo will now always use ESM,
the tooling scripts/binaries in AIO need to be switched to ESM
too. Most of the scripts are already ESM, but a few had to be converted.
Note that the Dgeni generation does not use ESM because it's unaffected
and the Dgeni CLI is used. In the future we could also update the Dgeni
setup to ESM but there is no need currently.
PR Close#48521
Since we generate a `.mjs` file as entry-point for jasmine tests,
a couple of issues prevented the transitive dependencies from
bootstrap targets to be brought in (causing resolution errors):
1. The `_files` (previously `_esm2015`) targets are no longer needed,
and they also miss all the information on runfiles.
2. The aspect for computing linker mappings does not respect the
`bootstrap` attribute from the `spec_entrypoint` so we manually
add the extract ESM output targets (this rule works with the aspect
and forwards linker mappings).
PR Close#48521
For every `ts_library` target we expose a shorthand that grants
access to the JS files because `DefaultInfo` of a ts library
only exposes the `.d.ts` files.
We rename this away from `es2015` since in practice it's a much
higher target these days. Additionally we no longer use the devmode
output but rather use the prodmode output which has the explicit
`.mjs` output- compatible with ESM.
PR Close#48521
For standalone components it may be beneficial to group multiple declarations
into a single array, that can then be imported all at once in `Component.imports`.
If this array is declared within a library, however, would the AOT compiler
need to extract the contents of the array from the declaration file. This
requires that the array is constructed using an `as const` cast, which results
in a readonly tuple declaration in the generated .d.ts file of the library:
```ts
export declare const DECLARATIONS: readonly [typeof StandaloneDir];
```
The partial evaluator logic did not support this syntax, so this pattern was
not functional when a library is involved. This commit adds the necessary
logic in the static interpreter to evaluate this type at compile time.
Closes#48089
PR Close#48091
Because the language service uses the compiler, we try to produce as
much useful information as possible rather than throwing hard errors.
Hard errors cause the compiler to crash. While this can be acceptable
when compiling a program as part of a regular build, this is undesirable
for the language service.
PR Close#48314
The stricter checks under `strictInjectionParameters` in Angular 15 now enforce that
an inherited constructor must be compatible with DI, based on whether all parameters
are valid injection tokens. There is an issue when the constructor is inherited from
a class in a declaration file though, as information on the usage of `@Inject()` is
not present within a declaration file. This means that this stricter check cannot be
accurately performed, resulting in false positives.
This commit disables the stricter check to behave the same as it did prior to
Angular 15, therefore avoiding the false positive.
Fixes#48152
PR Close#48156
`getPotentialPipes` returns possible pipes which can be used in the provided context, whether already in scope or requiring an import.
This is necessary to implement auto-import support for pipes in the language service.
PR Close#48090
This commit updates the logic related to the attribute and property binding rules for <iframe> elements. There is a set of <iframe> attributes that may affect the behavior of an iframe and this change enforces that these attributes are only applied as static attributes, making sure that they are taken into account while creating an <iframe>.
If Angular detects that some of the security-sensitive attributes are applied as an attribute or property binding, it throws an error message, which contains the name of an attribute that is causing the problem and the name of a Component where an iframe is located.
BREAKING CHANGE:
Existing iframe usages may have security-sensitive attributes applied as an attribute or property binding in a template or via host bindings in a directive. Such usages would require an update to ensure compliance with the new stricter rules around iframe bindings.
PR Close#47964
This reverts commit 2d08965b1a.
The reason for revert is that we've identified some issues with implementation. The issues will get addressed soon and the fix would be re-submitted.
PR Close#47959
This commit updates the logic related to the attribute order on iframes and makes the rules more strict. There is a set of iframe attributes that may affect the behavior of an iframe, this change enforces that these attributes are applied before an `src` or `srcdoc` attributes are applied to an iframe, so that they are taken into account.
If Angular detects that some of the attributes are set after the `src` or `srcdoc`, it throws an error message, which contains the name of ann attribute that is causing the problem and the name of a Component where an iframe is located. In most cases, it should be enough to change the order of attributes in a template to move the `src` or `srcdoc` ones to the very end.
BREAKING CHANGE:
Existing iframe usages may have `src` or `srcdoc` preceding other attributes. Such usages may need to be updated to ensure compliance with the new stricter rules around iframe bindings.
PR Close#47935
Implements more of the runtime validations for host directives as compiler diagnostics so that they can be caught earlier. Also does some minor cleanup.
PR Close#47768
In AOT compilations, the `strictInjectionParameters` compiler option can
be enabled to report errors when an `@Injectable` annotated class has a
constructor with parameters that do not provide an injection token, e.g.
only a primitive type or interface.
Since Ivy it's become required that any class with Angular behavior
(e.g. the `ngOnDestroy` lifecycle hook) is decorated using an Angular
decorator, which meant that `@Injectable()` may need to have been added
to abstract base classes. Doing so would then report an error if
`strictInjectionParameters` is enabled, if the abstract class has an
incompatible constructor for DI purposes. This may be fine though, as
a subclass may call the constructor explicitly without relying on
Angular's DI mechanism.
Therefore, this commit excludes abstract classes from the
`strictInjectionParameters` check. This avoids an error from being
reported at compile time. If the constructor ends up being used by
Angular's DI system at runtime, then the factory function of the
abstract class will throw an error by means of the `ɵɵinvalidFactory`
instruction.
In addition to the runtime error, this commit also analyzes the inheritance
chain of an injectable without a constructor to verify that their inherited
constructor is valid.
BREAKING CHANGE: Invalid constructors for DI may now report compilation errors
When a class inherits its constructor from a base class, the compiler may now
report an error when that constructor cannot be used for DI purposes. This may
either be because the base class is missing an Angular decorator such as
`@Injectable()` or `@Directive()`, or because the constructor contains parameters
which do not have an associated token (such as primitive types like `string`).
These situations used to behave unexpectedly at runtime, where the class may be
constructed without any of its constructor parameters, so this is now reported
as an error during compilation.
Any new errors that may be reported because of this change can be resolved either
by decorating the base class from which the constructor is inherited, or by adding
an explicit constructor to the class for which the error is reported.
Closes#37914
PR Close#44615
Previously when a file was being analyzed to determine if a shim should
be generated, up to two calls to the host `fileExists` function per file
per generator were made. In the default host, each `fileExists` call made
two underlying file system calls. Following these calls, the file was then
read via `getSourceFile`. However, `getSourceFile` will return `undefined`
if the requested file does not exist. As a result, `getSourceFile` can be
used directly to request both potential file names and leverage the return
value to determine if the file does not exist. This avoids the need to call
`fileExists` at all.
PR Close#47682
`getPotentialImportsFor` returns an array of possible imports, including TypeScript module specifier and identifier name, for a requested trait in the context of a given component.
PR Close#47631
`getPotentialTemplateDirectives` returns possible directives which can be used in the provided context, whether already in scope or requiring an import.
This is necessary to implement auto-import support for standalone components in the language service.
PR Close#47561
Using raw objects as a lookup structure will inadvertently find methods defined on
`Object`, where strings are expected. This causes errors downstream when string
operations are applied on functions.
This commit switches over to use `Map`s in the DOM element schema registry to fix
this category of issues.
Fixes#46936
PR Close#47220
This option has no longer any effect as Ivy is the only rendering engine.
BREAKING CHANGE: Angular compiler option `enableIvy` has been removed as Ivy is the only rendering engine.
PR Close#47346
This is the compile-time implementation of the `hostDirectives` feature plus a little bit of runtime code to illustrate how the newly-generated code will plug into the runtime. It works by creating a call to the new `ɵɵHostDirectivesFeature` feature whenever a directive has a `hostDirectives` field. Afterwards `ɵɵHostDirectivesFeature` will patch a new function onto the directive definition that will be invoked during directive matching.
For example, if we take the following definition:
```ts
@Directive({
hostDirectives: [HostA, {directive: HostB, inputs: ['input: alias']}]
})
class MyDir {}
```
Will compile to:
```js
MyDir.ɵdir = ɵɵdefineComponent({
features: [ɵɵHostDirectivesFeature([HostA, {
directive: HostB,
inputs: {
input: "alias"
}
}])]
});
```
The template type checking is implemented during directive matching by adding the host directives applied on the host to the array of matched directives whenever the host is matched in a template.
Relates to #8785.
PR Close#46868
This helper accepts a class for an Angular trait, and returns the NgModule which owns that trait. This will be useful for the language service import project, which needs to edit import arrays on the module.
PR Close#47166
Replaces (almost) all of the usages of the deprecated `getMutableClone` function from TypeScript which has started to log deprecation warnings in version 4.8 and will likely be removed in version 5.0. The one place we have left is in the default import handling of ngtsc which will be more difficult to remove.
PR Close#47167
This helper accepts a class, and returns the primary Angular Decorator associated with that trait (e.g. the Component, Pipe, Directive, or NgModule decorator). This will be useful for the language service import project, which needs to edit import arrays inside the decorator.
PR Close#47180
Adds support for TypeScript 4.8 and resolves some issues that came up as a result of the update.
Most of the issues came from some changes in TypeScript where the `decorators` and `modifiers` properties were removed from most node types, and were combined into a single `modifiers` array. Since we need to continue supporting TS 4.6 and 4.7 until v15, I ended up creating a new `ngtsc/ts_compatibility` directory to make it easier to reuse the new backwards-compatible code.
PR Close#47038
improve the error message for non-standalone components which are not
exported from their module, and that are also imported directly as if
they were standalone
this change simply adds the suggestion to the developer to import the
ngModule instead
resolves#46004
PR Close#46114
The source-map package now requires the
`SourceMapConsumer`/`SourceMapGenerator` classes to be instantiated
asynchronously. This commit updates our tests to account for that.
PR Close#46888
Saves us some bytes by not emitting `providers` in `defineInjector`. While the amount of bytes isn't huge, I think that this change is worthwhile, because `ng generate` currently generates `providers: []` with every `NgModule` which users can forget to remove.
PR Close#46301
When generating .d.ts metadata for NgModules, by default we emit type
references to their declarations, imports, and exports. However, this
information is not necessarily useful to consumers. References to private
directives (those that aren't exported by the NgModule) for example aren't
at all useful as they can only affect other components declared in the
NgModule. References to imports are of limited usefulness - they might be
helpful for an IDE to understand the DI structure of an application, but
aren't at all used by a downstream compiler.
Generating this metadata is not without cost. When an incremental build
system uses changes in inputs to determine when a rebuild is necessary, any
changes in .d.ts files might cause downstream targets to rebuild. If those
.d.ts changes are in the "private" side of the NgModule (imports or non-
exported directives/pipes), then these rebuilds are wholly unnecessary.
This commit introduces the `onlyPublishPublicTypingsForNgModules` flag for
the compiler. When this flag is set, the compiler will filter the emitted
references in NgModule .d.ts output and only reference those directives/
pipes that are exported from the NgModule (its public API surface). Omitting
the flag preserves the existing behavior of emitting all references, both
public and private.
This is especially useful for build systems such as Bazel.
PR Close#45894
This commit updates the error message to use correct info depending on whether a component is standalone or not. Previously we were always referring to @NgModules as a place to fix the issue, but not we also mention @Component when needed (for standalone components).
PR Close#46159
Angular generally supports cycles between components in the same NgModule.
We have a mechanism of moving the component scope declaration into the
NgModule file in this case. This ensures that Angular never itself
introduces an import which creates a cycle.
What happens if the cycle already exists in the user's program, though, is a
bit different. In these cases, the "correct" emit for Angular is to generate
the component scope (whether direct or remote) inside of a closure, to
prevent evaluating the scope's references until module evaluation is
complete and all cyclic imports have been resolved. We don't want to do this
for *all* scopes because the code size cost of emitting a function wrapper
is non-zero.
In this fix, we take the presence of a `forwardRef` in a component's
`imports` or in an NgModule `declarations` or `imports` as a sign that
component scopes emitted into those files need to be protected against
cyclic references. In a future commit, we may introduce a warning or error
if cyclic imports are not protected behind `forwardRef` in these cases, but
this will take some time to implement.
PR Close#46139
This commit improves the reported error when importing e.g. `RouterModule.forRoot()`
from within `Component.imports`. Such import is not supported, as standalone components
can only refer to other standalone entities or NgModules in their `imports` array;
`ModuleWithProviders` are not supported as `Component.imports` is meant to be used
for the compilation scope of the component, _not_ for configuring DI.
Closes#46003
PR Close#46009
update the error message presented during aot compilation when an unrecognized
tag/element is found in a standalone component so that it does not mention
the ngModule anymore
Note: the jit variant is present in PR #45920resolves#45818
PR Close#45919
This commit accounts for the Babel types changes. Some properties
can now also be `undefined` so existing checks/assertions had to
be adjusted to also capture `undefined` (along with `null`).
Additionally, in preparation for a new ECMA proposal, Babel types
seem to have been updated to include private names in object property
keys. This is not necessarily the case for object expressions, but
could be for object patterns (in the future -- when implemented).
More details: https://github.com/babel/babel/pull/14304 and
https://github.com/tc39/proposal-destructuring-private.
PR Close#45967
This commit fixes a small issue in the logic around the calculation of
template scopes for standalone components. These scopes include a
`Reference` for each dependency of a standalone component, which is used to
generate references to that dependency in various contexts.
Previously, the `Reference` used for a dependency was the one generated from
its own metadata. For example, a referenced directive used the `Reference`
that was created when analyzing the directive declaration itself. This still
works, as the compiler is always able to emit a reference to any valid
`Reference`. However, it's not optimal.
The `Reference` which should be used instead is the one generated from
analyzing the standalone component's `imports` array, which has knowledge of
how the dependency is referenced from within the standalone component's file
itself. This allows the compiler to skip creating a new import for the
dependency when emitting the standalone component, and use the existing,
user-authored import instead. This saves on code size and avoids taxing the
bundler with unnecessary imports.
PR Close#46029
The Angular compiler performs cycle detection when generating imports within
component files. This was previously necessary as reifying dependencies
discovered via NgModules into the component output could add imports that
weren't present in the original component and potentially create cycles.
Doing this could cause order-of-execution issues with existing user imports,
so the compiler detects this case and falls back to an alternative way of
specifying component dependencies that doesn't risk creating cycles.
For standalone components, Angular does not need to add new imports to the
component file as the user has already explicitly referenced dependencies
in the `@Component.imports`. As a result, the cycle detection can be
skipped.
Correctly authoring a program with import cycles is always challenging. One
side of a cyclic import will always initially evaluate to `undefined`, and
this can result in errors in the component definition when this happens
within component `imports`.
Our compiler _could_ detect the cycle and choose to wrap the component
dependencies in an automatic closure instead, avoiding any issues with
`undefined` during an eager evaluation. However, this commit makes an active
choice not to do that as it only serves to mask the problems with cyclic
imports. Future refactorings may cause the "other half" of the cycle to
break. Users should instead be aware of the potential problems with cycles
and explicitly defer evaluations with `forwardRef` where needed. This
ensures that future implementations of Angular compilation which may not be
able to automatically detect import cycles and correct accordingly can still
compile such components.
PR Close#46029
The NodeJS Bazel linker does not work well on Windows because there
is no sandboxing and linker processes from different tests will attempt
to modify the same `node_modules`, causing concurrency race conditions
and resulting in flakiness.
PR Close#45872
This commit improves the error message for using `imports` on a component
that isn't set to `standalone: true`. Two concrete improvements are made:
* A related information message is added to the diagnostic which suggests
the fix of adding `standalone: true`.
* The component is marked as poisoned, preventing other errors which might
be caused by an incorrectly configured template scope from being generated
and thus masking the original problem.
Fixes#45850
PR Close#45851
In AOT compilations, the `strictInjectionParameters` compiler option can
be enabled to report errors when an `@Injectable` annotated class has a
constructor with parameters that do not provide an injection token, e.g.
only a primitive type or interface.
Since Ivy it's become required that any class with Angular behavior
(e.g. the `ngOnDestroy` lifecycle hook) is decorated using an Angular
decorator, which meant that `@Injectable()` may need to have been added
to abstract base classes. Doing so would then report an error if
`strictInjectionParameters` is enabled, if the abstract class has an
incompatible constructor for DI purposes. This may be fine though, as
a subclass may call the constructor explicitly without relying on
Angular's DI mechanism.
Therefore, this commit excludes abstract classes from the
`strictInjectionParameters` check. This avoids an error from being
reported at compile time. If the constructor ends up being used by
Angular's DI system at runtime, then the factory function of the
abstract class will throw an error by means of the `ɵɵinvalidFactory`
instruction.
In addition to the runtime error, this commit also analyzes the inheritance
chain of an injectable without a constructor to verify that their inherited
constructor is valid.
Closes#37914
PR Close#44615
Excludes styles that resolve to empty strings from the emitted metadata so that they don't result in empty `<style>` tags at runtime.
Fixes#31191.
PR Close#45459
This commit updates the logic to detect a situation when a standalone component is used in the NgModule-based bootstrap (`@NgModule.bootstrap`). Both AOT and JIT compilers are updated to handle this situation.
PR Close#45825
In v14, the partial compilation output of components have changed in a way
that prevents older versions of Angular to compile the partial declarations
correctly.
In particular, we used to emit used directives/components in separate arrays called
`components` and `directives`, and used pipes in a property called `pipes`:
```js
TestComponent.ɵcmp = i0.ɵɵngDeclareComponent({
minVersion: "12.0.0",
version: "13.3.0",
type: TestComponent,
selector: "ng-component",
ngImport: i0,
template: ``,
isInline: true,
directives: [{ type: i1.SomeDir, selector: "[some-dir]" }],
components: [{ type: i1.SomeCmp, selector: "some-cmp" }],
pipes: { 'async': i2.AsyncPipe },
});
```
In the above example, the `version` property indicates which exact compiler
version was used to compile the component, but the `minVersion` allows older
versions of the compiler/Angular linker to "link" the partial declaration to
its final AOT compilation output.
In v14, the used directives, components and pipes are now emitted together
into a single array under the `dependencies` property:
```js
TestComponent.ɵcmp = i0.ɵɵngDeclareComponent({
minVersion: "12.0.0",
version: "13.3.0",
type: TestComponent,
selector: "ng-component",
ngImport: i0,
template: ``,
isInline: true,
dependencies: [
{ kind: "directive", type: i1.SomeDir, selector: "[some-dir]" },
{ kind: "component", type: i1.SomeCmp, selector: "some-cmp" },
{ kind: "pipe", type: i2.AsyncPipe },
],
});
```
This change has been made in support of standalone components, but it does mean
that older compiler versions can no longer link these partial declarations
as desirable as none of the components, directives and pipes would be included
in the AOT-compiled code.
By increasing the `minVersion` property, we hint to older compiler versions that
they are not capable of processing the partial declaration. This allows reporting
an error at compile time instead of resulting in runtime failures due to missing
components, directives and pipes.
PR Close#45782
Adds support for TypeScript 4.7. Changes include:
* Bumping the TS version as well as some Bazel dependencies to include https://github.com/bazelbuild/rules_nodejs/pull/3420.
* Adding a backwards-compatibility layer for calls to `updateTypeParameterDeclaration`.
* Making `LView` generic in order to make it easier to type the context based on the usage. Currently the context can be 4 different types which coupled with stricter type checking would required a lot of extra casting all over `core`.
* Fixing a bunch of miscellaneous type errors.
* Removing assertions of `ReferenceEntry.isDefinition` in a few of the language service tests. The field isn't returned by TS anymore and we weren't using it for anything.
* Resolving in error in the language service that was caused by TS attempting to parse HTML files when we try to open them. Previous TS was silently setting them as `ScriptKind.Unknown` and ignoring the errors, but now it throws. I've worked around it by setting them as `ScriptKind.JSX`.
PR Close#45749
Before standalone, everything that could appear in an NgModule's `imports`
was relevant to DI, and needed to be emitted in the `imports` of the
generated `InjectorDef` definition. With the introduction of standalone
types, NgModule `imports` can now contain components, directives, and pipes
which are standalone. Only standalone components need to be included in
the `imports` of the generated injector definition - directives and pipes
have no effect on DI. Having them present doesn't cause any errors in the
runtime (they're filtered out by the injector itself) but it does prevent
tree-shaking.
With this commit, the generation of `InjectorDef` now filters the `imports`
to exclude directives and pipes as much as possible. It's not _always_
possible because an expression in `imports` may pull in both a directive and
a `ModuleWithProviders` reference, and we have no way of referencing just
the MWP part of that expression. Therefore this is an optimization, not a
rule of `InjectorDef` compilation.
PR Close#45701
Previously, the NgModule handler would resolve the `imports` field as one
unit, producing an array of `Reference`s. With this refactoring, if
`imports` is a literal array, each individual element will be resolved
independently. This will allow filtering in the future at the element level,
since there will be a separate `ts.Expression` for each individual element.
PR Close#45701
This commit bundles tests for standalone components that are possible after
previous implementation commits. Most new tests are compliance tests, but
a test is also included to validate that the template type-checking system
can work with standalone components as well.
PR Close#45672
This commit adds a type field to .d.ts metadata for directives, components,
and pipes which carries a boolean literal indicating whether the given type
is standalone or not. For backwards compatibility, this flag defaults to
`false`.
Tests are added to validate that standalone types coming from .d.ts files
can be correctly imported into new standalone components.
PR Close#45672
This commit propagates the `isStandalone` flag for a component, directive,
or pipe during partial compilation of a standalone declaration. This flag
allows the linker to properly process a standalone declaration that it
encounters.
PR Close#45672
Standalone component scopes were first implemented in the
`ComponentDecoratorHandler` itself, due to an assumption that "standalone"
allowed for a localized analysis of the component's dependencies. However,
this is not strictly true. Other compiler machinery also needs to understand
component scopes, including standalone component scopes. A good example is
the template type-checking engine, which uses a `ComponentScopeReader` to
build full metadata objects (that is, metadata that considers the entire
inheritance chain) for type-checking purposes. Therefore, the
`ComponentScopeReader` should be able to give the scope for a standalone
component.
To achieve this, a new `StandaloneComponentScopeReader` is implemented, and
the return type of `ComponentScopeReader.getScopeForComponent` is expanded
to express standalone scopes. This cleanly integrates the "standalone"
concept into the existing machinery.
PR Close#45672
This commit expands on the unified dependency tracking in the previous
commit and adds tracking of NgModule dependencies. These are not used for
standard components, but are emitted for standalone components to allow the
runtime to roll up providers from those NgModules into standalone injectors.
PR Close#45672
Previously, the compiler tracked directives and pipes in template scopes
separately. This commit refactors the scope system to unify them into a
single data structure, disambiguated by a `kind` field.
PR Close#45672
Previously, the compiler would represent template dependencies of a
component in its component definition through separate fields (`directives`,
`pipes`).
This commit refactors the compiler/runtime interface to use a single field
(`dependencies`). The runtime component definition object still has separate
`directiveDefs` and `pipeDefs`, which are calculated from the `dependencies`
when the definition is evaluated.
This change is also reflected in partially compiled declarations. To ensure
compatibility with partially compiled code already on NPM, the linker
will still honor the old form of declaration (with separate fields).
PR Close#45672
This links back each placeholder in a message to the original Angular template span which defines its expression. This is useful for understanding where each placeholder comes from in the context of the full message.
PR Close#45606
This commit carries the `standalone` flag forward from a directive/pipe
into its generated directive/pipe definition, allowing the runtime to
recognize standalone entities.
PR Close#44973
This commit implements the next step of Angular's "standalone" functionality,
by allowing directives/components/pipes declared as `standalone` to be imported
into NgModules. Errors are raised when such a type is not standalone but is
included in an NgModule's imports.
PR Close#44973
This commit improves the error messages generated by the compiler when NgModule
scope analysis finds structural issues within a compilation. In particular,
errors are now shown on a node within the metadata of the NgModule which
produced the error, as opposed to the node of the erroneous declaration/import/
export. For example, if an NgModule declares `declarations: [FooCmp]` and
`FooCmp` is not annotated as a directive, component, or pipe, the error is now
shown on the reference to `FooCmp` in the `declarations` array expression.
Previously, the error would have been shown on `FooCmp` itself, with a mention
in the error text of the NgModule name.
Additional error context in some cases has been moved to related information
attached to the diagnostic, which further improves the legibility of such
errors. Error text has also been adjusted to be more succinct, since more info
about the error is now delivered through context.
PR Close#44973
Recent changes in `rules_nodejs` caused the test case copy file actions
to be transitioned into the `exec` configuration, resulting in much larger
file paths. These paths break on Windows with the shell argument limit, and
with the path limit, causing errors like:
```
ERROR: C:/users/circleci/ng/packages/compiler-cli/test/compliance/test_cases/BUILD.bazel:9:12: Copying file packages/compiler-cli/test/compliance/test_cases/r3_compiler_compliance/components_and_directives/value_composition/structural_directives_if_directive_def.js failed: (Exit 1): cmd.exe failed: error executing command
cd /d C:/users/circleci/_bazel_circleci/u4uoan2j/execroot/angular
SET PATH=C:\Program Files\Git\usr\bin;C:\Program Files\Git\bin;C:\Windows;C:\Windows\System32;C:\Windows\System32\WindowsPowerShell\v1.0
SET RUNFILES_MANIFEST_ONLY=1
cmd.exe /C bazel-out\x64_windows-opt-exec-2B5CBBC6\bin\packages\compiler-cli\test\compliance\test_cases\test_cases--1973427149-cmd.bat
The system cannot find the path specified
```
https://app.circleci.com/pipelines/github/angular/angular/44038/workflows/4b530cb2-f232-4e1d-b35a-e6e085151d08/jobs/1140017
PR Close#45431
.substr() is deprecated so we replace it with functions which work similarily but aren't deprecated
Signed-off-by: Tobias Speicher <rootcommander@gmail.com>
PR Close#45397
When we have an event listener inside an embedded view, we generate a `restoreView` call which saves the view inside of the LFrame. The problem is that we don't clear it until it gets overwritten which can lead to memory leaks.
These changes rework the generated code in order to generate a `resetView` call which will clear the view from the LFrame.
Fixes#42848.
PR Close#43075
In early versions of Angular, it was sometimes necessary to provide a
`moduleId` to `@Component` metadata, and the common pattern for doing this
was to set `moduleId: module.id`. This relied on the bundler to fill in a
value for `module.id`.
However, due to the superficial similarity between `Component.moduleId` and
`NgModule.id`, many users ended up setting `id: module.id` in their
NgModules. This is an anti-pattern that has a few negative effects,
including preventing the NgModule from tree-shaking properly.
This commit changes the compiler to ignore `id: module.id` in NgModules, and
instead provide a warning which suggests removing the line entirely.
PR Close#45024
Angular contains an NgModule registry, which allows a user to declare
NgModules with string ids and retrieve them via those ids, using the
`getNgModuleById` API.
Previously, we attempted to structure this registration in a clever fashion
to allow for tree-shaking of registered NgModules (that is, those with ids).
This sort of worked due to the accidental alignment of behaviors from the
different tree-shakers involved. However, this trick relies on the
generation of `.ngfactory` files and how they're specifically processed in
various bundling scenarios. We intend to remove `.ngfactory` files, hence
we can no longer rely on them in this way.
The correct solution here is to recognize that `@NgModule({id})` is
inherently declaring a global side-effect, and such classes should not
really be eligible for tree-shaking in the first place. This commit removes
all the old registration machinery, and standardizes on generating a side-
effectful call to `registerNgModuleType` for NgModules that have ids.
There is some risk here that NgModules with unnecessary `id`s may not
tree-shake as a result of this change, whereas they would have in previous
circumstances. The fix here should be to remove the `id` if it's not needed.
Specifying an `id` is a request that the NgModule be retained regardless of
any other references, in case it is later looked up by string id.
PR Close#45024
Jasmine logs a warning when there's a `describe` with no tests. These changes fix one such case in the compiler that happens when the tests are run against Windows.
PR Close#45285
The `@angular/localize` package depends on a version of Babel that is two years
old, so this commit updates to the latest version.
Some changes were made to the linker and compliance tests to account for slight
changes in source maps, along with a few code updates because of changes to
the typings of Babel.
PR Close#44931
In templates with several levels of nested nodes, it's common for several `elementStart`/`elementEnd` instructions to show up in a row which can be optimized away.
These changes add chaining support for `elementStart`, `elementEnd`, `elementContainerStart` and `elementContainerEnd` to shave off some bytes when possible.
PR Close#44994
This commit implements the first phase of standalone components in the Angular
compiler. This mainly includes the scoping rules for standalone components
(`@Component({imports})`).
Significant functionality from the design is _not_ implemented by this PR,
including:
* imports of standalone components into NgModules.
* the provider aspect of standalone components
Future commits will address these issues, as we proceed with the design of
this feature.
PR Close#44812
Refs http://b/214103351.
This happens if a user writes `<span i18n>Message</span>`. This is accepted as an internationalized message, but without a description. JSCompiler will throw an error in this situation because descriptions are generally required. Now, the Angular compiler will generate a suppression annotation so JSCompiler allows the syntax. This will ease an internal migration to JSCompiler-based i18n.
PR Close#44787
Attempting to run as is fails because we have `"type": "module"`. `shelljs` is a CommonJS module however, so we need to do a default import and destructure.
```
$ node packages/compiler-cli/test/compliance/update_all_goldens.js
const {exec} = require('shelljs');
^
ReferenceError: require is not defined in ES module scope, you can use import instead
This file is being treated as an ES module because it has a '.js' file extension and '/home/douglasparker/Source/ng/packages/compiler-cli/package.json' contains "type": "module". To treat it as a CommonJS script, rename it to use the '.cjs' file extension.
at file:///home/douglasparker/Source/ng/packages/compiler-cli/test/compliance/update_all_goldens.js:11:16
at ModuleJob.run (node:internal/modules/esm/module_job:183:25)
at async Loader.import (node:internal/modules/esm/loader:178:24)
at async Object.loadESM (node:internal/process/esm_loader:68:5)
at async handleMainPromise (node:internal/modules/run_main:63:12)
```
PR Close#44916
An `ng-template` with an inline template (i.e. has a structural
directive) would previously not get an `undefined` `tagName` because the
logic assumed the element would be `t.Element` or `t.Content` and read
the tag name from the `name` property. For a `t.Template`, this exists
instead on the `t.tagName`. The final result would be an `tagName` of `undefined`
for the parent `t.Template`, causing failures in the indexer downstream.
This `undefined` value is actually expected in the renderer code, even
though the type does not specify this possibility. This change updates
the type of `tagName` to be `string|null` and explicitly handles the
case where there is a structural directive on an `ng-template`. You can
see how the two are differentiated in the compliance code that was
modified in this commit.
PR Close#44788
Previously, if a bad extended diagnostic category was given, it would fail with the expected error as well as an unexpected assertion error:
```
$ ng build -c development
✔ Browser application bundle generation complete.
./src/main.ts - Error: Module build failed (from ./node_modules/@ngtools/webpack/src/ivy/index.js):
Error: Unexpected call to 'assertNever()' with value:
test
at /home/douglasparker/Source/ng-new/node_modules/@ngtools/webpack/src/ivy/loader.js:77:18
at processTicksAndRejections (internal/process/task_queues.js:95:5)
./src/polyfills.ts - Error: Module build failed (from ./node_modules/@ngtools/webpack/src/ivy/index.js):
Error: Unexpected call to 'assertNever()' with value:
test
at /home/douglasparker/Source/ng-new/node_modules/@ngtools/webpack/src/ivy/loader.js:77:18
at processTicksAndRejections (internal/process/task_queues.js:95:5)
Error: error NG4004: Angular compiler option "extendedDiagnostics.checks['invalidBananaInBox']" has an unknown diagnostic category: "test".
Allowed diagnostic categories are:
warning
error
suppress
```
The assertion comes from `ExtendedTemplateCheckerImpl`, which expects a well-formed configuration, yet the compiler would construct it even when errors were found. This commit skips constructing and running extended diagnostics if the configuration had errors, which should avoid triggering these assertion errors.
I'm unfortunately not able to actually test this change. The test passes even before the fix because the `ngc` binary and end-to-end tests [don't request diagnostics unless the configuration is considered valid](ed21f5c753/packages/compiler-cli/src/perform_compile.ts (L292-L293)). See [Slack](https://angular-team.slack.com/archives/C4WHZQMRA/p1642641305003800) for more details.
PR Close#44778
Refs #42966.
Extended diagnostics provide additional analysis about Angular templates by emitting warnings for specific patterns known to be error prone or cause developer confusion. Currently, there are two such diagnostics which are enabled by default:
* `invalidBananaInBox` emits a warning if a user writes a two-way binding backwards like `([foo])="bar"`, when they actually wanted `[(foo)]="bar"`.
* `nullishCoalescingNotNullable` emits a warning if a binding attempts to perform nullish coalescing (`??`) on a type which does not include `null` or `undefined`, such as `{{ foo ?? 'bar' }}` where `foo` is defined as `string` instead of `string | null`.
These diagnostics are enabled as warnings by default, but this can be configured in the `tsconfig.json` like so:
```jsonc
{
"angularCompilerOptions": {
"extendedDiagnostics": {
// The categories to use for specific diagnostics.
"checks": {
// Maps check name to its category.
"invalidBananaInBox": "suppress"
},
// The category to use for any diagnostics not listed in `checks` above.
"defaultCategory": "error"
}
}
}
```
Allowed categories for a diagnostic are `warning` (default), `error`, or `suppress`. `warning` emits the diagnostic but allows the compilation to succeed, `error` *will* fail the compilation, while `suppress` will ignore the diagnostic altogether.
The initial release has two diagnostics, and we are hoping to expand this longer term to add more diagnostics and provide additional insight into Angular templates to detect and surface developer mistakes *before* hours of debugging are wasted.
PR Close#44712
Refs #42966.
This validates the `tsconfig.json` options for extended template diagnostics. It verifies:
* `strictTemplates` must be enabled if `extendedDiagnostics` have any explicit configuration.
* `extendedDiagnostics.defaultCategory` must be a valid `DiagnosticCategoryLabel`.
* `extendedDiagnostics.checks` keys must all be real diagnostics.
* `extendedDiagnostics.checks` values must all be valid `DiagnosticCategoryLabel`s.
These include new error codes, each of which prints out the exact property that was the issue and what the available options are to fix them.
It does disallow the config:
```json
{
"angularCompilerOptions": {
"strictTemplates": false,
"extendedDiagnostics": {
"defaultCategory": "suppress"
}
}
}
```
Such a configuration is technically valid and could be executed, but will be rejected by this verification logic. There isn't much reason to ever do this, since users could just drop `extendedDiagnostics` altogether and get the intended effect. This is unlikely to be a significant issue for users, so it is considered invalid for now to keep the implementation simple.
PR Close#44391
Refs #42966.
The `defaultCategory` option is used for any extended template diagnostics which do not have any specific category specified for them. It defaults to `warning`, since that is the most common behavior expected for users. This provides an easy way for users to promote all diagnostics to errors or suppress all diagnostics.
PR Close#44391
Refs #42966.
This updates `TemplateContext` to include a new `makeTemplateDiagnostic()` function which automatically uses the correct diagnostic category for that check. This makes sure that each diagnostic is emitted with the correct category. It also implicitly passes some known values like `component` and `code` to make the extended template diagnostics a little simpler. Diagnostics which are suppressed are never instantiated at all, which acts as a slight performance optimization since any emitted diagnostics would be ignored anyways.
Unfortunately, diagnostics still have access to `ctx.templateTypeChecker.makeTemplateDiagnostic()` to manually create diagnostics with a different category. Both banana in box and nullish coalescing checks include tests to make sure they respect a manually configured category. This convention should hopefully give a reasonable certainty that new diagnostics will use the correct reporting function, even if that is not strictly enforced.
PR Close#44391
Refs #42966.
This moves extended template check factory invocations into the checker itself, where it can provide a more consistent API contract. Factories are called with compiler options and may return a `TemplateCheck` or `undefined` if the current options do not support that check. This allows `nullishCoalescingNotNullable` to disable itself when `strictNullChecks` is disabled without throwing errors. This gives extended template diagnostics a stronger abstraction model to define their behavior with.
PR Close#44391
In certain scenarios, the compiler may have crashed with an
`Unable to write a reference` error which would be particularly hard
to diagnose. One of the primary reasons for this failure is when the
`rootDir` option is configured---typically the case for libraries---
and a source file is imported using a relative import from an external
entry-point. This would normally report TS6059 for the invalid relative
import, but the crash prevents this error from being surfaced.
This commit refactors the reference emit logic to result in an explicit
`Failure` state with a reason as to why the failure occurred. This state
is then used to report a `FatalDiagnosticException`, preventing a hard
crash.
Closes#44414
PR Close#44587
To make our test output i.e. devmode output more aligned
with what we produce in the NPM packages, or to be more
aligned with what Angular applications will usually consume,
the devmode output is switched from ES5 to ES2015.
Additionally various tsconfigs (outside of Bazel) have been
updated to match with the other parts of the build. The rules
are:
ES2015 for test configurations, ES2020 for actual code that will
end up being shipped (this includes the IDE-only tsconfigs).
PR Close#44505
This commit finishes the removal of View Engine from the codebase, deleting
those pieces of @angular/compiler which were only used for VE.
Co-Authored-By: JoostK <joost.koehoorn@gmail.com>
PR Close#44368
This commit does a first-pass removal of the View Engine infrastructure
in compiler-cli. A more in-depth cleanup is necessary and large parts
of the View Engine compiler infrastructure remain within
`@angular/compiler`, this is just a first cleanup step.
PR Close#44269
As a preparation for the removal of the ViewEngine parts in
`compiler-cli`, this commit moves the version number helper functions
up one level such that the whole `diagnostics` subfolder can be removed.
PR Close#44269
Adds support for TypeScript 4.5. Includes the following changes:
* Bumping the package versions.
* Fixing a few calls to `createExportSpecifier` and `createImportSpecifier` that require an extra parameter.
* Adding some missing methods to the TS compiler hosts.
* Fixing an issue in the TS mocks for the ngcc tests where a regex was too agressive and was trying to match a path like `/node_modules/@typescript/lib-es5`.
* Accounting for type-only import specifiers when reporting DI errors (see #43620).
Fixes#43620.
PR Close#44164
The downlevel decorator transform (commonly used in the CLI and other
tooling of the ecosystem for enabling JIT ES2015+), is currently
incorrectly dealing with nested classes.
The transform will accidentally visit nested classes (in a constructor)
multiple times and generate duplicated instances of the `ctorParameters`
fields. This does not sound like an issue at first, but the duplicated
`ctorParameters` fields will miss significant type information that has
been elided by the first visit, resulting in generated code like the
following:
```js
let MyClass = /* @__PURE__ */ __name(class MyClass extends UpgradeNg1ComponentAdapter {
constructor(scope, injector3, elementRef) {
}
}, "MyClass");
MyClass.ctorParameters = () => [
{ type: void 0, decorators: [{ type: Inject, args: [$SCOPE] }] },
{ type: Injector },
{ type: ElementRef }
];
MyClass.ctorParameters = () => [
{ type: void 0 }, // <---- NOTE!
{ type: Injector },
{ type: ElementRef }
];
```
PR Close#44281
Now that the core package has been cleaned up to no longer contain Ivy
switch code, the transform to switch the `PRE_R3` markers to become
`POST_R3` is deleted as well.
PR Close#43891
This commit removes most tests that were designated as only covering View
Engine code. It also removes tag filters from CI and local commands to run
tests.
In a few cases (such as with the packages/compiler tests), this tag was
improperly applied, and certain test cases have been added back running in
Ivy mode.
This commit also empties `@angular/compiler/testing` as it is no longer
necessary (this is safe since compiler packages are not public API). It can
be deleted in the future.
PR Close#43884
When a partially compiled component or directive is "linked" in JIT mode, the body
of its declaration is evaluated by the JavaScript runtime. If a class is referenced
in a query (e.g. `ViewQuery` or `ContentQuery`) but its definition is later in the
file, then the reference must be wrapped in a `forwardRef()` call.
Previously, query predicates were not wrapped correctly in partial declarations
causing the code to crash at runtime. In AOT mode, this code is never evaluated
but instead transformed as part of the build, so this bug did not become apparent
until Angular Material started running JIT mode tests on its distributable output.
This change fixes this problem by noting when queries are wrapped in `forwardRef()`
calls and ensuring that this gets passed through to partial compilation declarations
and then suitably stripped during linking.
See https://github.com/angular/components/pull/23882 and https://github.com/angular/components/issues/23907
PR Close#44113
Currently the TS version checking function interprets a version like `1.2.3-rc.5` as `1.2.NaN` which would allow it to bypass the version checking altogether.
These changes add a little bit more logic to ensure that such versions are handled correctly. There's also an error if we don't manage to parse the version string.
Also it seemed like we never actually ran the version check unit tests, because they didn't have a test target.
PR Close#44109
When a safe method call such as `person?.getName()` is used, the
compiler would generate invalid code if the argument list also contained
a safe method call. For example, the following code:
```
person?.getName(config?.get('title').enabled)
```
would generate
```
let tmp;
ctx.person == null ? null : ctx.person.getName((tmp = tmp) == null ?
null : tmp.enabled)
```
Notice how the call to `config.get('title')` has completely disappeared,
with `(tmp = tmp)` having taken its place.
The issue occurred due to how the argument list would be converted
from expression AST to output AST twice. First, the outer safe method
call would first convert its arguments list. This resulted in a
temporary being allocated for `config.get('title')`, which was stored in
the internal `_resultMap`. Only after the argument list has been
converted would the outer safe method call realize that it should be
guarded by a safe access of `person`, entering the `convertSafeAccess`
procedure to convert itself. This would convert the argument list once
again, but this time the `_resultMap` would already contain the
temporary `tmp` for `config?.get('title')`. Consequently, the safe
method in the argument list would be emitted as `tmp`.
This commit fixes the issue by ensuring that nodes are only converted
once.
Closes#44069
PR Close#44088
This commit re-enables the `perform_watch` test target and updates the
test to run with the Ivy compiler.
Additionally, this target was switched over to use Angular v12 packages
as input to the test, to allow the ViewEngine tests to continue working
with v13 packages which are Ivy-only. This commit reverts those changes
now that View Engine tests are disabled, as it's desirable to test
against local artifacts that are build within the monorepo instead of
depending on NPM packages.
PR Close#43893
Using the tag "view-engine-only" better describes the expected usage of bazel targets with the test. They can
only be run with view engine.
PR Close#43862
Since building with ViewEngine is not longer desired on CI, removing the ivy vs non-ivy testing yarn scripts
is done, informing developers to instead use `yarn test` as all tests should be run using the Ivy complier.
PR Close#43862
This reverts commit bba0a87055.
The reason for rollback: this change is breaking some targets in Google's codebase when there is no attribute value is displayed (attr.aria-label) when translated.
PR Close#43882
While fully dynamic bound properties (and attributes) cannot be marked for localization, properties that only contain interpolation can.
This commit ensure that attribute bindings that only contain interpolation can also be marked for localization.
Closes#43260
PR Close#43815
When extracting i18n messages from templates, ICU messages are split out from the
message that contains them. This can make it difficult in the translation files to match up
the two messages, especially if the ICU is reused in multiple placeholders.
This commit builds on top of the previous one to expose the message ID of ICU messages
from the ICU placeholders as additional metadata in the `$localize` tagged strings.
Now the metablock following any placeholder can also contain the associated ID
delimited from the placeholder name by `@@`.
Fixes#17506
PR Close#43534
Refs #42966.
Previously, a build when emitted one warning and no errors would fail with a non-zero exit code. This is not what users would expect, but had not been an issue before since the compiler did not actually emit any warnings. With upcoming extended template diagnostics and other warnings, this is now a case that needs to be supported. Warnings are printed to `stderr` as before, but `ngc` now exits with code `0` and the build is considered successful.
Implemented this by adding a new `expectedExitCode` parameter to `driveDiagnostics()` which asserts against the real exit code. Most importantly, it does not **require** the the build to pass since any exit code can be given, so it is up to the test to assert this as well as many messages printed to make sure they are acceptable. This is useful for testing warnings and ensuring the build still passes.
PR Close#43673
Similar to the other private entry-points we have added for localize,
bazel or the migrations, we should expose the tooling code through
a dedicated private export. This will make the compiler-cli exports
more consistent and it will become easier for the CLI to export
necessary code.
PR Close#43431
Removes the remaining usages of dynamic require statements in the
package output. Since we declare all shipped packages as strict ESM,
we cannot use dynamic require statements anymore. This commit switches
these usages to actual `import` statements.
Note: Tsickle continues to remain an optional dependency since bundling
does not work with its UMD package output. Also tsickle is rarely used by
consumers, if at all, so bundling does not really provide any significant
value. To continue keeping tsickle optional (since it's still needed by the
`annotateForClosureCompiler` option which is also respected in ngtsc), we
pass-through a tsickle instance as a parameter to `main`. This allows us to
keep the compile functions synchronous without having to refactor the majority
of the watch compilation code, and majority of tests for ngc, ngtsc.
Consumers (like the `ngc` bin entry-point) can then load tsickle based on their
module format. e.g. tsickle can be imported through `require` to keep everything
sync, but in ESM, the dynamic import can be used beforehand to pass `tsickle` to
the `main` function. We can revisit this in the future but for now this does the
trick without exceeding the scope of this commit..
PR Close#43431
As outlined in the previous commit which enabled the `esModuleInterop`
TypeScript compiler option, we need to update all namespace imports
for `typescript` to default imports. This is needed to allow for
TypeScript to be imported at runtime from an ES module.
Similar changes are needed for modules like `semver` where the types incorrectly
suggest named exports that will not exist at runtime when imported from ESM.
This commit refactors all imports to match with the lint rule we have
configured in the previous commit. See the previous commit for more
details on why certain imports have been changed.
A special case are the imports to `@babel/core` and `@babel/types`. For
these a special interop is needed as both default imports, or named
imports break the other module format. e.g default imports would work
well for ESM, but it breaks for CJS. For CJS, the named imports would
only work, but in ESM, only the default export exist. We work around
this for now until the devmode is using ESM as well (which would be
consistent with prodmode and gives us more valuable test results). More
details on the interop can be found in the `babel_core.ts` files (two
interops are needed for both localize/or the compiler-cli).
PR Close#43431
The view engine language-service tests currently rely on the `npm_package` output
that is built locally. They rely on the package output mostly for
compiling test scenarios (with dependencies on e.g. forms), and for
the testing the metadata extraction (testing proper suggestions for VE).
The reliance on these packages becomes problematic with the new Angular
Package Format v13 where no metadata files are shipped. To continue
being able to test View Engine language-service compatibility, we will
use the v12.x framework packages for some of the test scenarios.
PR Close#43431
The View Engine ngc tests currently rely on the `npm_package` output
that is built locally. This becomes problematic with the new Angular
Package Format v13 where no metadata files are shipped. To continue
being able to test View Engine compilation, we will use the v12.x
framework packages for running the View Engine test.
Note: This means that we no longer test metadata extraction directly
for our framework packages, but given that any change to View Engine
will still land in patch, where the VE packaging still occurs, we should
be covered here.
PR Close#43431
Now that `Route.loadChildren` no longer accepts a string, there is no
need for tooling to find all string-based `loadChildren` to setup lazy
imports for them. As a result, the `listLazyRoutes` operation that
enumerates all string-based `loadChildren` occurrences is no longer
needed and is therefore removed from the compiler.
The `listLazyRoutes` API remains on the `Program` interface to avoid
breaking external tools that may be using this method, but those tools
should ultimately move away from using this API.
PR Close#43591
This commit removes the ability to configure lazy routes using a string
for `loadChildren`, together with the supporting classes to load an
`NgModuleFactory` at runtime.
BREAKING CHANGE:
It is no longer possible to use `Route.loadChildren` using a string
value. The following supporting classes were removed from
`@angular/core`:
- `NgModuleFactoryLoader`
- `SystemJsNgModuleFactoryLoader`
The `@angular/router` package no longer exports these symbols:
- `SpyNgModuleFactoryLoader`
- `DeprecatedLoadChildren`
The signature of the `setupTestingRouter` function from
`@angular/core/testing` has been changed to drop its `NgModuleFactoryLoader`
parameter, as an argument for that parameter can no longer be created.
PR Close#43591
When specifying the `deps` array in the `@Injectable` decorator to
inject dependencies into the injectable's factory function, it should
be possible to use an array literal to configure how the dependency
should be resolved by the DI system.
For example, the following example is allowed:
```ts
@Injectable({
providedIn: 'root',
useFactory: a => new AppService(a),
deps: [[new Optional(), 'a']],
})
export class AppService {
constructor(a) {}
}
```
Here, the `'a'` string token should be injected as optional. However,
the AOT compiler incorrectly used the array literal itself as injection
token, resulting in a failure at runtime. Only if the token were to be
provided using `[new Optional(), new Inject('a')]` would it work
correctly.
This commit fixes the issue by using the last non-decorator in the
array literal as the token value, instead of the array literal itself.
Note that this is a loose interpretation of array literals: if a token
is omitted from the array literal then the array literal itself is used
as token, but any decorator such as `new Optional()` would still have
been applied. When there's multiple tokens in the list then only the
last one will be used as actual token, any prior tokens are silently
ignored. This behavior mirrors the JIT interpretation so is kept as is
for now, but may benefit from some stricter checking and better error
reporting in the future.
Fixes#42987
PR Close#43226
Adds support for TypeScript 4.4. High-level overview of the changes made in this PR:
* Bumps the various packages to `typescript@4.4.2` and `tslib@2.3.0`.
* The `useUnknownInCatchVariables` compiler option has been disabled so that we don't have to cast error objects explicitly everywhere.
* TS now passes in a third argument to the `__spreadArray` call inside child class constructors. I had to update a couple of places in the runtime and ngcc to be able to pick up the calls correctly.
* TS now generates code like `(0, foo)(arg1, arg2)` for imported function calls. I had to update a few of our tests to account for it. See https://github.com/microsoft/TypeScript/pull/44624.
* Our `ngtsc` test setup calls the private `matchFiles` function from TS. I had to update our usage, because a new parameter was added.
* There was one place where we were setting the readonly `hasTrailingComma` property. I updated the usage to pass in the value when constructing the object instead.
* Some browser types were updated which meant that I had to resolve some trivial type errors.
* The downlevel decorators tranform was running into an issue where the Closure synthetic comments were being emitted twice. I've worked around it by recreating the class declaration node instead of cloning it.
PR Close#43281
Currently the compiler has three different classes to represent a "call to something":
1. `MethodCall` - `foo.bar()`
2. `SafeMethodCall` - `foo?.bar()`.
3. `FunctionCall` - Any calls that don't fit into the first two classes. E.g. `foo.bar()()`.
There are a few problems with this approach:
1. It is inconistent with the TypeScript AST which only has one node: `CallExpression`.
2. It means that we have to maintain more code, because the various parts of the compiler need to know about three node types.
3. It doesn't allow us to easily implement some new JS features like safe calls (e.g. `foo.bar?.())`).
These changes rework the compiler so that it produces only one node: `Call`. The new node behaves similarly to the TypeScript `CallExpression` whose `receiver` can be any expression.
There was a similar situation in the output AST where we had an `InvokeMethodExpression` and `InvokeFunctionExpression`. I've combined both of them into `InvokeFunctionExpression`.
PR Close#42882
Previously, the way templates were tokenized meant that we lost information
about the location of interpolations if the template contained encoded HTML
entities. This meant that the mapping back to the source interpolated strings
could be offset incorrectly.
Also, the source-span assigned to an i18n message did not include leading
whitespace. This confused the output source-mappings so that the first text
nodes of the message stopped at the first non-whitespace character.
This commit makes use of the previous refactorings, where more fine grain
information was provided in text tokens, to enable the parser to identify
the location of the interpolations in the original source more accurately.
Fixes#41034
PR Close#43132
The lexer now splits encoded entity tokens out from text and attribute value tokens.
Previously encoded entities would be decoded and the decoded value would be
included as part of the text token of the surrounding text. Now the entities
have their own tokens. There are two scenarios: text and attribute values.
Previously the contents of `<div>Hello & goodbye</div>` would be a single
TEXT token. Now it will be three tokens:
```
TEXT: "Hello "
ENCODED_ENTITY: "&", "&"
TEXT: " goodbye"
```
Previously the attribute value in `<div title="Hello & goodbye">` would be
a single text token. Now it will be three tokens:
```
ATTR_VALUE_TEXT: "Hello "
ENCODED_ENTITY: "&", "&"
ATTR_VALUE_TEXT: " goodbye"
```
- ENCODED_ENTITY tokens have two parts: "decoded" and "encoded".
- ENCODED_ENTITY tokens are always preceded and followed by either TEXT tokens
or ATTR_VALUE_TEXT tokens, depending upon the context, even if they represent
an empty string.
The HTML parser has been modified to recombine these tokens to allow this
refactoring to have limited effect in this commit. Further refactorings
to use these new tokens will follow in subsequent commits.
PR Close#43132
Previously, the decorator transformer was annotating the synthesized properties with TS type annotations. However, because it ran after the JSDoc transformer, the TS types were just dropped from the emitted JS. Attempting to move the decorator transformer before the JSDoc transformer causes tsickle crashes because synthetic AST fragments are not attached to a SourceFile node.
PR Close#43021
Return `TemplateDiagnostic` instead of `ts.Diagnostic` when getting the
extended template diagnostics. This makes the integration with the
language service easier. This also fixes the error code and now uses the
`ngErrorCode` for extended template diagnostics.
Refs #42966
PR Close#43134
This commit adds extended template diagnostics end-to-end tests, to make
sure the diagnostics are generated correctly. Template checks are
already tested with unit tests.
Refs #42966
PR Close#43107
Previously with View Engine output, the `enableResourceInlining` option
could be set to inline external templates and styles (also for the
resulting `.metadata.json` files). We want to do the same for the Ivy
compilation pipeline (regardless of the compilation mode). The full
compilation definitions, and partial declarations currently already
inline resources in a way that no external requests need to be made.
Although there is one exception currently. These are the calls for
setting class metadata (for testbed overrides). This commit updates
the set class metadata calls (for both partial and full compilation)
to always inline resources. This means that libraries do not need
to start shipping external styles/templates just for the
`setClassMetadata` calls.
Note: Only doing this for partial compilation has been considered, but
it seems like it would be simpler implementation-wise to do this for
full compilation as well. Given the external resources are already
inlined (through their `ecmp` definitions), it seems acceptable (or
even more aligned) to do the same for the set class metadata calls.
PR Close#43178
The compliance tests can check source-map segments against expectations
encoded into the expectation files. Previously, the encoding of the expected
segment was only delimited by whitespace, but this made it difficult to identify
segments that started or ended with whitespace.
Now these segment expectations are wrapped in double-quotes which makes
it easier to read and understand the expectation files.
PR Close#43129
Export `getSourceCodeForDiagnostic` from `ngtsc/testing` to make it
available for other packages. This will help confirm that the source
code is correct in other tests.
Refs #42966
PR Close#42984
Previously, the way templates were tokenized meant that we lost information
about the location of interpolations if the template contained encoded HTML
entities. This meant that the mapping back to the source interpolated strings
could be offset incorrectly.
Also, the source-span assigned to an i18n message did not include leading
whitespace. This confused the output source-mappings so that the first text
nodes of the message stopped at the first non-whitespace character.
This commit makes use of the previous refactorings, where more fine grain
information was provided in text tokens, to enable the parser to identify
the location of the interpolations in the original source more accurately.
Fixes#41034
PR Close#42062
The compliance tests can check source-map segments against expectations
encoded into the expectation files. Previously, the encoding of the expected
segment was only delimited by whitespace, but this made it difficult to identify
segments that started or ended with whitespace.
Now these segment expectations are wrapped in double-quotes which makes
it easier to read and understand the expectation files.
PR Close#42062
The static interpreter assumed that a foreign function expression would
have to be imported from the absolute module specifier that was used for
the foreign function itself. This assumption does not hold for the
`forwardRef` foreign function resolver, as that extracts the resolved
expression from the function's argument, which is not behind the
absolute module import of the `forwardRef` function.
The prior behavior has worked for the typical usage of `forwardRef`,
when it is contained within the same source file as where the static
evaluation started. In that case, the resulting reference would
incorrectly have an absolute module guess of `@angular/core`, but the
local identifier emit strategy was capable of emitting the reference
without generating an import using the absolute module guess.
In the scenario where the static interpreter would first have to follow
a reference to a different source that contained the `forwardRef` would
the compilation fail. In that case, there is no local identifier
available such that the absolute module emitter would try to locate the
imported symbol from `@angular/core`. which fails as the symbol is not
exported from there.
This commit fixes the issue by checking whether a foreign expression
occurs in the same source file as the call expression. If it does, then
the absolute module specifier that was used to resolve the call
expression is ignored.
Fixes#42865
PR Close#42887
In #41995 the type of `TrackByFunction` was changed such that the
declaration of a `trackBy` function did not cause the item type to be
widened to the `trackBy`'s item type, which may be a supertype of the
iterated type. This has introduced situations where the template type
checker is now reporting errors for cases where a `trackBy` function is
no longer assignable to `TrackByFunction`.
This commit fixes the error by also including the item type `T` in
addition to the constrained type parameter `U`, allowing TypeScript to
infer an appropriate `T`.
Fixes#42609
PR Close#42692
Currently unless a listener inside of an embedded view tries to reference something from the parent view, or if the reference is a local ref, we don't generate the view restoration instructions and we allow for the value to be picked up from the context object in the function parameters. The problem is that the listener is only run during creation mode and the context object may have been swapped out afterwards.
These changes fix the issue by always generating the view restoration instructions for listeners inside templates.
Fixes#42698.
PR Close#42755
Updates the Bazel NodeJS rules to v4.0.0-beta.0. This is necessary
so that the Angular components repo can update, and it's generally
good to stay as up-to-date as possible with the Bazel rules as it's
easy to fall behind, and updating early allows us to discover issues
affecting our tooling earlier (where they are easier to address due to
e.g. potential breaking change policy).
PR Close#42760
Source files that contain directives or components that need an inline
type constructor or inline template type-check block would always be
considered as affected in incremental rebuilds. The inline operations
cause the source file to be updated in the TypeScript program that is
created for template type-checking, which becomes the reuse program
in a subsequent incremental rebuild.
In an incremental rebuild, the source files from the new user program
are compared to those from the reuse program. The updated source files
are not the same as the original source file from the user program, so
the incremental engine would mark the file which needed inline
operations as affected. This prevents incremental reuse for these files,
causing sub-optimal rebuild performance.
This commit attaches the original source file for source files that have
been updated with inline operations, such that the incremental engine
is able to compare source files using the original source file.
Fixes#42543
PR Close#42759
As of ES2021, JavaScript allows using underscores as separators inside numbers, in order to make them more readable (e.g. `1_000_000` vs `1000000`). TypeScript has had support for separators for a while so these changes expand the template parser to handle them as well.
PR Close#42672
Adds support for shorthand property declarations inside Angular templates. E.g. doing `{foo, bar}` instead of `{foo: foo, bar: bar}`.
Fixes#10277.
PR Close#42421
If an implcit receiver is accessed in a listener inside of an `ng-template`, we generate some extra code in order to ensure that we're assigning to the correct object. The problem is that the logic wasn't covering keyed writes which caused it to write to the wrong object and throw an assertion error at runtime.
These changes expand the logic to cover keyed writes.
Fixes#41267.
PR Close#42603
xi18n is the operation of extracting i18n messages from templates in the
compilation. Previously, only View Engine was able to perform xi18n. This
commit implements xi18n in the Ivy compiler, and a copy of the View Engine
test for Ivy verifies that the results are identical.
PR Close#42485
This is based on a discussion we had a few weeks ago. Currently if a component uses `ViewEncapsulation.ShadowDom` and its selector doesn't meet the requirements for a custom element tag name, a vague error will be thrown at runtime saying something like "Element does not support attachShadowRoot".
These changes add a new diagnostic to the compiler that validates the component selector and gives a better error message during compilation.
PR Close#42245
Updates the compiler-cli compliance goldens. The golden updates are
required due to a regression in TypeScript 4.3 that causes the emitter
to not incorrectly preserve lines when emitting a node list.
This can be reverted once https://github.com/microsoft/TypeScript/pull/44070
is available.
PR Close#42022
Switches the repository to TypeScript 4.3 and the latest
version of tslib. This involves updating the peer dependency
ranges on `typescript` for the compiler CLI and for the Bazel
package. Tests for new TypeScript features have been added to
ensure compatibility with Angular's ngtsc compiler.
PR Close#42022
Currently we support safe property (`a?.b`) and method (`a?.b()`) accesses, but we don't handle safe keyed reads (`a?.[0]`) which is inconsistent. These changes expand the compiler in order to support safe key read expressions as well.
PR Close#41911
The `ModuleWithProviders` type has required a generic type since Angular 10,
so it is no longer necessary for the compiler to transform usages of the
`ModuleWithProviders` type without the generic type, as that should have
been reported as a compile error. This commit removes the detection logic
from ngtsc.
PR Close#41996
When a `trackBy` function is used that accepts a supertype of the iterated
array's type, the loop variable would undesirably be inferred as the supertype
instead of the array's item type. This commit adds an inferred type parameter
to `TrackByFunction` to allow an extra degree of freedom, enabling the
loop value to be inferred as the most narrow type.
Fixes#40125
PR Close#41995
The ngtsc test targets have fake declarations files for `@angular/core`
and `@angular/common` and the template type checking tests can leverage
the fake common declarations instead of declaring its own types.
PR Close#41995
Type-only imports are known to be elided by TypeScript, so the compiler
can be certain that such imports do not contribute to potential import
cycles. As such, type-only imports are no longer considered during cycle
analysis.
Regular import statements that would eventually be fully elided by
TypeScript during emit if none of the imported symbols are used in a
value position continue to be included in the cycle analysis, as the
cycle analyzer is unaware of these elision opportunities. Only explicit
`import type` statements are excluded.
PR Close#42453
The compiler flag `compileNonExportedClasses` allows the Angular compiler to
process classes which are not exported at the top level of a source file.
This is often used to allow for AOT compilation of test classes inside
`it()` test blocks, for example.
Previously, the compiler would identify exported classes by looking for an
`export` modifier on the class declaration itself. This works for the
trivial case, but fails for indirectly exported classes:
```typescript
// Component is declared unexported.
@Component({...})
class FooCmp {...}
// Indirect export of FooCmp
export {FooCmp};
```
This is not an immediate problem for most application builds, since the
default value for `compileNonExportedClasses` is `true` and therefore such
classes get compiled regardless.
However, in the Angular Language Service now, `compileNonExportedClasses` is
forcibly overridden to `false`. That's because the tsconfig used by the IDE
and Language Service is often far broader than the application build's
configuration, and pulls in test files that can contain unexported classes
not designed with AOT compilation in mind.
Therefore, the Language Service has trouble working with such structures.
In this commit, the `ReflectionHost` gains a new API for detecting whether a
class is exported. The implementation of this method now not only considers
the `export` modifier, but also scans the `ts.SourceFile` for indirect
exports like the example above. This ensures the above case will be
processed directly in the Language Service.
This new operation is cached using an expando symbol on the `ts.SourceFile`,
ensuring good performance even when scanning large source files with lots of
exports (e.g. a FESM file under `ngcc`).
Fixes#42184.
PR Close#42207
When `checkTypeOfPipes` is set to `false`, our TCB currently generates
the a statement like the following when pipes appear in the template:
`(_pipe1 as any).transform(args)`
This did enable us to get _some_ information from the Language Service
about pipes in this case because we still had access to the pipe
instance. However, because it is immediately cast to `any`, we cannot
get type information about the transform access. That means actions like "go to
definition", "find references", "quick info", etc. will return
incomplete information or fail altogether.
Instead, this commit changes the TCB to generate `(_pipe1.transform as any)(args)`.
This gives us the ability to get complete information for the LS
operations listed above.
PR Close#40523
This commit changes the reference emitters in the Ivy compiler to prefer
non-aliased exports if they exist. This avoids selecting "private
exports" that may not be stable, e.g. the reexports that have been added
by the View Engine compiler. Such reexports are not stable and are
therefore not suitable to be emitted into partial compilations, as the
output of partial compilations should only reference stable symbols
from upstream libraries.
An alternative solution has been considered where ViewEngine-generated
exports would gain a certain prefix, such that the Ivy compiler could
just exclude those exports (see #41443). However, that solution would
be insufficient in case a library is built using partial compilation and
while depending itself on a VE-compiled library from earlier versions of
Angular, where the magic prefix would be missing. For such libraries,
ngcc would have generated reexports using the declared name if not already
present so this change does result in choosing the correct export.
Because ngcc always generates reexports using the declared name even if
an aliased export is present, this change causes those ngcc-generated
exports to be chosen in downstream libraries using partial compilation.
This is unfortunate as it means that the declared names become
effectively public even if the library author was intentionally
exporting it using an alias. This commit does not address this problem;
it is expected that this should not result in widespread issues across
the library ecosystem.
Fixes#41277
PR Close#41866
We have a check that determines whether to generate property binding instructions for an `ng-template`. The check looks at whether the tag name is exactly `ng-template`, but the problem is that if the tag is placed in a non-HTML namespace (e.g. `svg`), the tag name will actually be `:namespace:ng-template` and the check will fail.
These changes resolve the issue by looking at the tag name without the namespace.
Fixes#41308.
PR Close#41669
Currently if a component defines a template inline, but not through a
string literal, the partial compilation references the template expression
as is. This is problematic because the component declaration can no longer
be processed by the linker later as there is no static interpretation. e.g.
```js
const myTemplate = `...`;
TestCmp.ɵcmp = i0.ɵɵngDeclareComponent({
version: "0.0.0-PLACEHOLDER",
type: TestCmp,
selector: "test-cmp",
ngImport: i0,
template: myTemplate,
isInline: true
});
```
To fix this, we use the the resolved template in such cases so that
the linker can process the template/component declaration as expected.
PR Close#41583
This is follow-up from #41437 and it reduces the amount of code we generate for safe property accesses (`a?.b`) and nullish coalescing (`a ?? b`) by:
1. Reusing variables in nested nullish coalescing expressions.
2. Not initializing temporary variables to `null`. The way our code is generated means that the value will always be overwritten before we compare against it so the initializer didn't really matter.
Fixes#41491.
PR Close#41563
Previously, it was not possible to block a partial-linker from trying to
process a declaration that was defined in a newer version of Angular than
that of the partial-linker. For example, if a partial-linker was published as
part of version 12.0.0, there was no way for a partially-compiled declaration
compiled via version 13.0.0 to tell the 12.0.0 linker that it would be invalid
to attempt to process it.
This commit adds a new `minVersion` property to partial-declarations, which is
interpreted as the "minimum partial-linker version" that can process this
declaration. When selecting a partial-linker for such a declaration, the known
linker version ranges are checked to find the most recent linker whose version
range has an overlap with the interpreted declaration range.
This approach allows us to set a minimum version for a declaration, which
can inform an old partial-linker that will it not be able to accurately
process the declaration.
Note that any pre-release part to versions are ignored in this selection
process.
The file-linker can be configured, via the `unknownDeclarationVersionHandling`
property of `LinkerOptions`, to handle such a situation in one of three ways:
- `error` - the version mismatch is a fatal error
- `warn` - a warning is sent to the logger but the most recent partial-linker
will attempt to process the declaration anyway.
- `ignore` - the most recent partial-linker will, silently, attempt to process
the declaration.
The default is to throw an error.
Closes#41497
PR Close#41578
There were three options being made available to users of the linker:
- ` enableI18nLegacyMessageIdFormat`
- `i18nNormalizeLineEndingsInICUs`
- ` i18nUseExternalIds`
None of these should actually be configurable at linking time
because partially-linked libraries have tighter restrictions on
what i18n options can be used.
This commit removes those options from the `LinkerOptions` interface.
It was considered to add a check for backwards compatibilty to ensure
that if these options were being passed, and were different to the expected
defaults, we would throw an informative error. But from looking at the
Angular CLI (the only known client of the linker) it has never been setting
these options so they have already always been set to the defaults.
BREAKING CHANGE:
Linked libraries no longer generate legacy i18n message ids. Any downstream
application that provides translations for these messages, will need to
migrate their message ids using the `localize-migrate` command line tool.
Closes#40673
PR Close#41554
When an Ivy NgModule is imported into a View Engine build, it doesn't have
metadata.json files that describe it as an NgModule, so it appears to VE
builds as a plain, undecorated class. The error message shown in this
situation generic and confusing, since it recommends adding an @NgModule
annotation to a class from a library.
This commit adds special detection into the View Engine compiler to give a
more specific error message when an Ivy NgModule is imported.
PR Close#41534
When multiple occurrences of the same package exist within a single
TypeScript compilation unit, TypeScript deduplicates the source files
by introducing redirected source file proxies. Such proxies are
recreated during an incremental compilation even if the original
declaration file did not change, which caused the compiler not to reuse
any work from the prior compilation.
This commit changes the incremental driver to recognize a redirected
source file and treat them as their unredirected source file.
PR Close#41448
The Angular compiler has to actively keep default import statements
alive if they were only used in type-only positions, but have been
emitted as value expressions for DI purposes. A problem occurred in
incremental recompilations, where the relationship between an identifier
usage and its corresponding default import would not be considered. This
could result in the removal of the default import statement and caused
a `ReferenceError` at runtime.
This commit fixes the issue by storing the association from an
identifier to its default import declaration on the source file itself,
instead of within the `DefaultImportTracker` instance. The
`DefaultImportTracker` instance is only valid for a single compilation,
whereas the association from an identifier to a default import
declaration is valid as long as the `ts.SourceFile` is the same
instance.
A subsequent commit refactor the `DefaultImportTracker` to no longer
be responsible for registering the association, as its lifetime is
conceptually too short to do so.
Fixes#41377
PR Close#41557
The `emitDecoratorMetadata` compiler option does not have to be enabled
as Angular decorators are transformed by the AOT compiler. Having the
option enabled in our tests can hide issues around import preservation,
as with `emitDecoratorMetadata` enabled the TypeScript compiler itself
does not elide imports even if they are only used in type-positions.
This is unlike having `emitDecoratorMetadata` disabled, however; in that
case the Angular compiler has to actively trick TypeScript into
retaining default imports when an identifier in a type-only position has
been reified into a value position for DI purposes.
A subsequent commit addresses a bug in default import preservation
that relies on this flag being `false`.
PR Close#41557
This commit refactors the generated code for class metadata in partial
compilation mode. Instead of emitting class metadata into a top-level
`ɵsetClassMetadata` call guarded by `ngDevMode` flags, the class
metadata is now declared using a top-level `ɵɵngDeclareClassMetadata`
call.
PR Close#41200
This commit changes the partial compilation so that it outputs declarations
rather than definitions for injectables.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41316
The other similar interfaces were renamed in https://github.com/angular/angular/pull/41119,
but this one was left since it had existed before Ivy. It looks like the interface was
never actually exposed on npm so it is safe to rename this one too.
PR Close#41316
Now that other values were removed from `R3ResolvedDependencyType`,
its meaning can now be inferred from the other properties in the
`R3DeclareDependencyMetadata` type. This commit removes this enum
and updates the code to work without it.
PR Close#41231
This instruction was created to work around a problem with injecting a
`ChangeDetectorRef` into a pipe. See #31438. This fix required special
metadata for when the thing being injected was a `ChangeDetectorRef`.
Now this is handled by adding a flag `InjectorFlags.ForPipe` to the
`ɵɵdirectiveInject()` call, which avoids the need to special test_cases
`ChangeDetectorRef` in the generated code.
PR Close#41231
This commit changes the partial compilation so that it outputs declaration
calls rather than compiled factory functions.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41231
The `ɵɵInjectorDef` interface is internal and should not be published publicly
as part of libraries. This commit updates the compiler to render an opaque
type, `ɵɵInjectorDeclaration`, for this instead, which appears in the typings
for compiled libraries.
PR Close#41119
Th `ɵɵFactoryDef` type will appear in published libraries, via their typings
files, to describe what type dependencies a DI factory has. The parameters
on this type are used by tooling such as the Language Service to understand
the DI dependencies of the class being created by the factory.
This commit moves the type to the `public_definitions.ts` file alongside
the other types that have a similar role, and it renames it to `ɵɵFactoryDeclaration`
to align it with the other declaration types such as `ɵɵDirectiveDeclaration`
and so on.
PR Close#41119
These types are only used in the generated typings files to provide
information to the Angular compiler in order that it can compile code
in downstream libraries and applications.
This commit aliases these types to `unknown` to avoid exposing the
previous alias types such as `ɵɵDirectiveDef`, which are internal to
the compiler.
PR Close#41119
The partial declaration of a component includes the list of directives
that are used in its template, including some metadata of the directive
which can be used during actual compilation of the component. Used
components are currently part of this list, as components are also
directives. This commit splits the used components into a dedicate
property in the partial declaration, which allows for template
compilation to optimize the generated code for components.
PR Close#41104
This commit changes the partial compilation so that it outputs declaration
calls rather than definition calls for NgModules and Injectors.
The JIT compiler and the linker are updated to be able to handle these
new declarations.
PR Close#41080
BREAKING CHANGE:
Switching default of `emitDistinctChangesOnlyDefaultValue`
which changes the default behavior and may cause some applications which
rely on the incorrect behavior to fail.
`emitDistinctChangesOnly` flag has also been deprecated and will be
removed in a future major release.
The previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in an artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail, and it should not be the thing that determines
how often change event should fire.
Unfortunately, fixing the behavior outright caused too many existing
applications to fail. For this reason, Angular considers this fix a
breaking fix and has introduced a flag in `@ContentChildren` and
`@ViewChildren`, that controls the behavior.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option is the new default with this change.
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
For backward compatibility before v12
`emitDistinctChangesOnlyDefaultValue` was set to `false. This change
changes the default to `true`.
PR Close#41121
Previously, injector definitions contained a `factory` property that
was used to create a new instance of the associated NgModule class.
Now this factory has been moved to its own `ɵfac` static property on the
NgModule class itself. This is inline with how directives, components and
pipes are created.
There is a small size increase to bundle sizes for each NgModule class,
because the `ɵfac` takes up a bit more space:
Before:
```js
let a = (() => {
class n {}
return n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({factory: function(t) { return new (t || n) }, imports: [[e.a.forChild(s)], e.a]}),
n
})(),
```
After:
```js
let a = (() => {
class n {}
return n.\u0275fac = function(t) { return new (t || n) },
n.\u0275mod = c.Cb({type: n}),
n.\u0275inj = c.Bb({imports: [[r.a.forChild(s)], r.a]}),
n
})(),
```
In other words `n.\u0275fac = ` is longer than `factory: ` (by 5 characters)
and only because the tooling insists on encoding `ɵ` as `\u0275`.
This can be mitigated in a future PR by only generating the `ɵfac` property
if it is actually needed.
PR Close#41022
This change marks all relevant define* callsites as pure, causing the compiler to
emmit either @__PURE__ or @pureOrBreakMyCode annotation based on whether we are
compiling code annotated for closure or terser.
This change is needed in g3 where we don't run build optimizer but we
need the code to be annotated for the closure compiler.
Additionally this change allows for simplification of CLI and build optimizer as they
will no longer need to rewrite the generated code (there are still other places where
a build optimizer rewrite will be necessary so we can't remove it, we can only simplify it).
PR Close#41096
In Angular programs, changing a file may require other files to be
emitted as well due to implicit NgModule dependencies. For example, if
the selector of a directive is changed then all components that have
that directive in their compilation scope need to be recompiled, as the
change of selector may affect the directive matching results.
Until now, the compiler solved this problem using a single dependency
graph. The implicit NgModule dependencies were represented in this
graph, such that a changed file would correctly also cause other files
to be re-emitted. This approach is limited in a few ways:
1. The file dependency graph is used to determine whether it is safe to
reuse the analysis data of an Angular decorated class. This analysis
data is invariant to unrelated changes to the NgModule scope, but
because the single dependency graph also tracked the implicit
NgModule dependencies the compiler had to consider analysis data as
stale far more often than necessary.
2. It is typical for a change to e.g. a directive to not affect its
public API—its selector, inputs, outputs, or exportAs clause—in which
case there is no need to re-emit all declarations in scope, as their
compilation output wouldn't have changed.
This commit implements a mechanism by which the compiler is able to
determine the impact of a change by comparing it to the prior
compilation. To achieve this, a new graph is maintained that tracks all
public API information of all Angular decorated symbols. During an
incremental compilation this information is compared to the information
that was captured in the most recently succeeded compilation. This
determines the exact impact of the changes to the public API, which
is then used to determine which files need to be re-emitted.
Note that the file dependency graph remains, as it is still used to
track the dependencies of analysis data. This graph does no longer track
the implicit NgModule dependencies, which allows for better reuse of
analysis data.
These changes also fix a bug where template type-checking would fail to
incorporate changes made to a transitive base class of a
directive/component. This used to be a problem because transitive base
classes were not recorded as a transitive dependency in the file
dependency graph, such that prior type-check blocks would erroneously
be reused.
This commit also fixes an incorrectness where a change to a declaration
in NgModule `A` would not cause the declarations in NgModules that
import from NgModule `A` to be re-emitted. This was intentionally
incorrect as otherwise the performance of incremental rebuilds would
have been far worse. This is no longer a concern, as the compiler is now
able to only re-emit when actually necessary.
Fixes#34867Fixes#40635Closes#40728
PR Close#40947
For certain generated function calls, the compiler emits a 'PURE' annotation
which informs Terser (the optimizer) about the purity of a specific function
call. This commit expands that system to produce a new Closure-specific
'pureOrBreakMyCode' annotation when targeting the Closure optimizer instead
of Terser.
PR Close#41021
This is a pre-requisite for #40360. Given the following template which has a listener
that references a variable from a parent template (`name`):
```
<ng-template let-name="name">
<button (click)="hello(name)"></button>
</ng-template>
```
We generate code that looks that looks like. Note how we access `name` through `ctx`:
```js
function template(rf, ctx) {
if (rf & 1) {
const r0 = ɵɵgetCurrentView();
ɵɵelementStart(0, "button", 2);
ɵɵlistener("click", function() {
ɵɵrestoreView(r0);
const name_r0 = ctx.name; // Note the `ctx.name` access here.
const ctx_r1 = ɵɵnextContext();
return ctx_r1.log(name_r0);
});
ɵɵelementEnd();
}
}
```
This works fine at the moment, because the template context object can't be changed after creation.
The changes in #40360 allow for the object to be changed, which means that the `ctx` reference
inside the listener will be out of date, because it was bound during creation mode.
This PR aims to address the issue by accessing the context inside listeners through the saved
view reference. With the new code, the generated code from above will look as follows:
```js
function template(rf, ctx) {
if (rf & 1) {
const r0 = ɵɵgetCurrentView();
ɵɵelementStart(0, "button", 2);
ɵɵlistener("click", function() {
const restoredCtx = ɵɵrestoreView(r0);
const name_r0 = restoredCtx.name;
const ctx_r1 = ɵɵnextContext();
return ctx_r1.log(name_r0);
});
ɵɵelementEnd();
}
}
```
PR Close#40833
Our approach for handling cyclic imports results in code that is
not easy to tree-shake, so it is not suitable for publishing in a
library.
When compiling in partial compilation mode, we are targeting
such library publication, so we now create a fatal diagnostic
error instead of trying to handle the cyclic import situation.
Closes#40678
PR Close#40782
This commit implements creating of `ɵɵngDeclarePipe()` calls in partial
compilation, and processing of those calls in the linker and JIT compiler.
See #40677
PR Close#40803
Produces a diagnostic when we cannot resolve a component's external style sheet or external template.
The previous behavior was to throw an exception, which crashed the
Language Service.
fixes angular/vscode-ng-language-service#1079
PR Close#40660
Normally the template parsing operation normalizes all template line endings
to '\n' only. This normalization operation causes source mapping errors when
the original template uses '\r\n' line endings.
The compiler already parses templates again to create a "diagnostic"
template AST with accurate source maps, to avoid other parsing issues that
affect source map accuracy. This commit configures this diagnostic parse to
also preserve line endings.
PR Close#40597
If the template parse option `leadingTriviaChars` is configured to
consider whitespace as trivia, any trailing whitespace of an element
would be considered as leading trivia of the subsequent element, such
that its `start` span would start _after_ the whitespace. This means
that the start span cannot be used to mark the end of the current
element, as its trailing whitespace would then be included in its span.
Instead, the full start of the subsequent element should be used.
To harden the tests that for the Ivy parser, the test utility `parseR3`
has been adjusted to use the same configuration for `leadingTriviaChars`
as would be the case in its production counterpart `parseTemplate`. This
uncovered another bug in offset handling of the interpolation parser,
where the absolute offset was computed from the start source span
(which excludes leading trivia) whereas the interpolation expression
would include the leading trivia. As such, the absolute offset now also
uses the full start span.
Fixes#39148
PR Close#40513
The compliance test runner has various macros that process the
expectation files before actually checking their contents. Among those
macros are i18n helpers, which uses a global message counter to be able
to uniquely identify ICU variables.
Because of the global nature of this message index, it was susceptible
to ordering issues which could result in flaky tests, although it failed
very infrequently.
This commit resets the global message counter before applying the macros.
As a result of this change an expectation file had to be updated; this
is actually a bug fix as said test used to fail if run in isolation (if
`focusTest: true` was set for that particular testcase).
PR Close#40529
Because the query now has `flags` which specify the mode, the static query
instruction can now be remove. It is simply normal query with `static` flag.
PR Close#40091
Previous implementation would fire changes `QueryList.changes.subscribe`
whenever the `QueryList` was recomputed. This resulted in artificially
high number of change notifications, as it is possible that recomputing
`QueryList` results in the same list. When the `QueryList` gets recomputed
is an implementation detail and it should not be the thing which determines
how often change event should fire.
This change introduces a new `emitDistinctChangesOnly` option for
`ContentChildren` and `ViewChildren`.
```
export class QueryCompWithStrictChangeEmitParent {
@ContentChildren('foo', {
// This option will become the default in the future
emitDistinctChangesOnly: true,
})
foos!: QueryList<any>;
}
```
PR Close#40091
The `template` and `isInline` fields were previously stored in a nested
object, which was initially done to accommodate for additional template
information to support accurate source maps for external templates. In
the meantime the source mapping has been accomplished in a different
way, and I feel this flattened structure is simpler and smaller so is
preferable over the nested object. This change also makes the `isInline`
property optional with a default value of `false`.
PR Close#40383
The parser has a list of tag definitions that it uses when parsing the template. Each tag has a
`contentType` which tells the parser what kind of content the tag should contain. The problem is
that the browser has two separate `title` tags (`HTMLTitleElement` and `SVGTitleElement`) and each
of them has to have a different `contentType`, otherwise the parser will throw an error further down
the pipeline.
These changes update the tag definitions so that each tag name can have multiple content types
associated with it and the correct one can be returned based on the element's prefix.
Fixes#31503.
PR Close#40259
The decorator downleveling transform patches `ts.EmitResolver.isReferencedAliasDeclaration`
to prevent elision of value imports that occur only in a type-position, which would
inadvertently install the patch repeatedly for each source file in the program.
This could potentially result in a stack overflow when a very large number of files is
present in the program.
This commit fixes the issue by ensuring that the patch is only applied once.
This is also a slight performance improvement, as `isReferencedAliasDeclaration`
is no longer repeatedly calling into all prior installed patch functions.
Fixes#40276
PR Close#40374
Now that `ReadonlyFileSystem` and `PathManipulation` interfaces are
available, this commit updates the compiler-cli to use these more
focussed interfaces.
PR Close#40281
Currently when analyzing the metadata of a directive, we bundle together the bindings from `host`
and the `HostBinding` and `HostListener` together. This can become a problem later on in the
compilation pipeline, because we try to evaluate the value of the binding, causing something like
`@HostBinding('class.foo') public true = 1;` to be treated the same as
`host: {'[class.foo]': 'true'}`.
While looking into the issue, I noticed another one that is closely related: we weren't treating
quoted property names correctly. E.g. `@HostBinding('class.foo') public "foo-bar" = 1;` was being
interpreted as `classProp('foo', ctx.foo - ctx.bar)` due to the same issue where property names
were being evaluated.
These changes resolve both of the issues by treating all `HostBinding` instance as if they're
reading the property from `this`. E.g. the `@HostBinding('class.foo') public true = 1;` from above
is now being treated as `host: {'[class.foo]': 'this.true'}` which further down the pipeline becomes
`classProp('foo', ctx.true)`. This doesn't have any payload size implications for existing code,
because we've always been prefixing implicit property reads with `ctx.`. If the property doesn't
have an identifier that can be read using dotted access, we convert it to a quoted one (e.g.
`classProp('foo', ctx['is-foo']))`.
Fixes#40220.
Fixes#40230.
Fixes#18698.
PR Close#40233
This commit changes the `PartialComponentLinker` to use the original source
of an external template when compiling, if available, to ensure that the
source-mapping of the final linked code is accurate.
If the linker is given a file-system and logger, then it will attempt
to compute the original source of external templates so that the final
linked code references the correct template source.
PR Close#40237
Now, if a source-mapping compliance test fails, the message displays both
the path to the generated file, and more helpfully the path to the expected
file.
PR Close#40237
Previously the names of the source and expectation files were often reused,
which caused potential confusion.
There is now a single source file for
each test-case, which is important when they are being compiled with different
compiler options, since the GOLDEN_PARTIAL file will only contain one copy
per file name.
The names of the expectation files have now been changed so that is clearer
which test-case they are related to.
PR Close#40237
The trustConstantHtml and trustConstantResourceUrl functions are only
meant to be passed constant strings extracted from Angular application
templates, as passing other strings or variables could introduce XSS
vulnerabilities.
To better protect these APIs, turn them into template tags. This makes
it possible to assert that the associated template literals do not
contain any interpolation, and thus must be constant.
Also add tests for the change to prevent regression.
PR Close#40082
The linker is implemented using a Babel transform such that Babel needs
to parse and walk a source file to find the declarations that need to be
compiled. If it can be determined that a source file is known not to
contain any declarations the parsing and walking can be skipped as a
performance improvement. This commit adds an exposed function for tools
that integrate the linker to use to allow short-circuiting of the linker
transform.
PR Close#40137
The types of directives and pipes that are used in a component's
template may be emitted into the partial declaration wrapped inside a
closure, which is needed when the type is declared later in the module.
This poses a problem for JIT compilation of partial declarations, as
this closure is indistinguishable from a class reference itself. To mark
the forward reference function as such, this commit changes the partial
declaration codegen to emit a `forwardRef` invocation wrapped around
the closure, which ensures that the closure is properly tagged as a
forward reference. This allows the forward reference to be treated as
such during JIT compilation.
PR Close#40117
Currently when `ɵɵtemplate` and `ɵɵelement` instructions are generated by compiler, all static attributes are
duplicated for both instructions. As a part of this duplication, i18n translation blocks for static i18n attributes
are generated twice as well, causing duplicate entries in extracted translation files (when Ivy extraction mechanisms
are used). This commit fixes this issue by introducing a cache for i18n translation blocks (for static attributes
only).
Also this commit further aligns `ɵɵtemplate` and `ɵɵelement` instruction attributes, which should help implement
more effective attributes deduplication logic.
Closes#39942.
PR Close#40077
Durring analysis we find template parse errors. This commit changes
where the type checking context stores the parse errors. Previously, we
stored them on the AnalysisOutput this commit changes the errors to be
stored on the TemplateData (which is a property on the shim). That way,
the template parse errors can be grouped by template.
Previously, if a template had a parse error, we poisoned the module and
would not procede to find typecheck errors. This change does not poison
modules whose template have typecheck errors, so that ngtsc can emit
typecheck errors for templates with parse errors.
Additionally, all template diagnostics are produced in the same place.
This allows requesting just the template template diagnostics or just
other types of errors.
PR Close#40026
Refactors the i18n error tests to be unit tests in ngtsc_spec.ts. There
is two reasons for doing this.
First is that the tests in compliace_old expected an expection to be be
thrown but did not fail the test if no exception was thrown. That means
that this test could miss catching a bug. It is also a big hacky to call
compile directly and expect an exception to be thrown for diagnostics.
Also, this can easily be unit tested and an end-to-end test is not
necessary since we are not making use of the goldfiles for these tests.
It is easier to maintain and less hacky to validate that we get helpful
error messages when nesting i18n sections by calling getDiagnostics
directly.
PR Close#40026
This commit temporarily excludes classes declared in .d.ts files from checks
regarding whether providers are actually injectable.
Such classes used to be ignored (on accident) because the
`TypeScriptReflectionHost.getConstructorParameters()` method did not return
constructor parameters from d.ts files, mostly as an oversight. This was
recently fixed, but caused more providers to be exposed to this check, which
created a breakage in g3.
This commit temporarily fixes the breakage by continuing to exclude such
providers from the check, until g3 can be patched.
PR Close#40118
This commit replaces `bazel` with `yarn bazel` in the error message (that instructs to regenerate golden file)
thrown while executing compliance tests. We use `yarn bazel` in other places (so we use the local version of bazel,
not the global one).
PR Close#40078
Prior to this change, the `setClassMetadata` call would be invoked
inside of an IIFE that was marked as pure. This allows the call to be
tree-shaken away in production builds, as the `setClassMetadata` call
is only present to make the original class metadata available to the
testing infrastructure. The pure marker is problematic, though, as the
`setClassMetadata` call does in fact have the side-effect of assigning
the metadata into class properties. This has worked under the assumption
that only build optimization tools perform tree-shaking, however modern
bundlers are also able to elide calls that have been marked pure so this
assumption does no longer hold. Instead, an `ngDevMode` guard is used
which still allows the call to be elided but only by tooling that is
configured to consider `ngDevMode` as constant `false` value.
PR Close#39987
These tests started failing because they had type-check
errors in their templates, and a recent commit turned on
full template type-checking by default.\
This commit fixes those templates and updates the expected
files as necessary.
PR Close#40040
These tests do not pass the typecheck phase of the compiler and fail.
The option to disable typechecking was removed recently so these tests
need to be fixed to be valid applications.
PR Close#40033
A couple reasons to justify removing the flag:
* It adds code to the compiler that is only meant to support test cases
and not any production. We should avoid code in that's only
meant to support tests.
* The flag enables writing tests that do not mimic real-world behavior
because they allow invalid applications
PR Close#40013
The golden files for the partial compliance tests need to be updated
with individual Bazel run invocations, which is not very ergonomic when
a large number of golden files need to updated. This commit adds a
script to query the Bazel targets that update the goldens and then runs
those targets sequentially.
PR Close#39989
This test migrates source-mapping tests to the new compliance test framework.
The original tests are found in the file at:
`packages/compiler-cli/test/ngtsc/template_mapping_spec.ts`.
These new tests also check the mappings resulting from partial compilation
followed by linking, after flattening the pair of source-maps that each
process generates.
Note that there are some differences between the mappings for full compile
and linked compile modes, due to how TypeScript and Babel use source-span
information on AST nodes. To accommodate this, there are two expectation
files for most of these source files.
PR Close#39939
This commit allows compliance test-cases to be written that specify
source-map mappings between the source and generated code.
To check a mapping, add a `// SOURCE:` comment to the end of a line:
```
<generated code> // SOURCE: "<source-url>" <source code>
```
The generated code will still be checked, stripped of the `// SOURCE` comment,
as normal by the `expectEmit()` helper.
In addition, the source-map segments are checked to ensure that there is a
mapping from `<generated code>` to `<source code>` found in the file at
`<source-url>`.
Note:
* The source-url should be absolute, with the directory containing the
TEST_CASES.json file assumed to be `/`.
* Whitespace is important and will be included when comparing the segments.
* There is a single space character between each part of the line.
* Newlines within a mapping must be escaped since the mapping and comment
must all appear on a single line of this file.
PR Close#39939
Previously one could set a flag in a `TEST_CASES.json` file to exclude
the test-cases from being run if the input files were being compiled
partially and then linked.
There are also scenarios where one might want to exclude test-cases
from "full compile" mode test runs.
This commit changes the compliance test tooling to support a new
property `compilationModeFilter`, which is an array containing one or
more of `"full compile"` and `"linked compile"`. Only the tests
whose `compilationModeFilter` array contains the current compilation
mode will be run.
PR Close#39939
Previously files were serialized with an extra newline seperator that
was not removed when parsing. This caused the parsed file to start with
an extra newline that invalidated its source-map.
Also, the splitting was producing an empty entry at the start of the extracted
golden files which is now ignored.
PR Close#39939
The schema accidentally included the `expectedErrors` and `extraCheck`
properties below the `files` property instead of below the `expectations`
property.
PR Close#39939
The partial compiler will add a version number to the objects that are
generated so that the linker can select the appropriate partial linker
class to process the metadata.
Previously this version matching was a simple number check. Now
the partial compilation writes the current Angular compiler version
into the generated metadata, and semantic version ranges are used
to select the appropriate partial linker.
PR Close#39847
The newly built compliance test runner was not using the shared source
file cache that was added in b627f7f02e,
which offers a significant performance boost to the compliance test
targets.
PR Close#39956
Previously, if a component had an external template with a hard error, the
compiler would "forget" the link between that component and its NgModule.
Additionally, the NgModule would be marked as being in error, because the
template issue would prevent the compiler from registering the component
class as a component, so from the NgModule it would look like a declaration
of a non-directive/pipe class. As a combined result, the next incremental
step could fix the template error, but would not refresh diagnostics for the
NgModule, leading to an incrementality issue.
The various facets of this problem were fixed in prior commits. This commit
adds a test verifying the above case works now as expected.
PR Close#39923
Previously, if a trait's analysis step resulted in diagnostics, the trait
would be considered "errored" and no further operations, including register,
would be performed. Effectively, this meant that the compiler would pretend
the class in question was actually undecorated.
However, this behavior is problematic for several reasons:
1. It leads to inaccurate diagnostics being reported downstream.
For example, if a component is put into the error state, for example due to
a template error, the NgModule which declares the component would produce a
diagnostic claiming that the declaration is neither a directive nor a pipe.
This happened because the compiler wouldn't register() the component trait,
so the component would not be recorded as actually being a directive.
2. It can cause incorrect behavior on incremental builds.
This bug is more complex, but the general issue is that if the compiler
fails to associate a component and its module, then incremental builds will
not correctly re-analyze the module when the component's template changes.
Failing to register the component as such is one link in the larger chain of
issues that result in these kinds of issues.
3. It lumps together diagnostics produced during analysis and resolve steps.
This is not causing issues currently as the dependency graph ensures the
right classes are re-analyzed when needed, instead of showing stale
diagnostics. However, the dependency graph was not intended to serve this
role, and could potentially be optimized in ways that would break this
functionality.
This commit removes the concept of an "errored" trait entirely from the
trait system. Instead, analyzed and resolved traits have corresponding (and
separate) diagnostics, in addition to potentially `null` analysis results.
Analysis (but not resolution) diagnostics are carried forward during
incremental build operations. Compilation (emit) is only performed when
a trait reaches the resolved state with no diagnostics.
This change is functionally different than before as the `register` step is
now performed even in the presence of analysis errors, as long as analysis
results are also produced. This fixes problem 1 above, and is part of the
larger solution to problem 2.
PR Close#39923
If the testcase has not specified that errors were expected, then any
errors that have occurred should be reported. These errors may have
prevented an output file from being generated, which resulted in hard
to debug test failures due to missing files.
PR Close#39862
Previously this would have just printed that `false` was not equal to
`true`, which, although true, is not very helpful. This commit adds
details about which special check failed together with the generated
code, for easier debugging.
PR Close#39863
This commit provides the machinery for the new file-based compliance test
approach for i18n tests, and migrates the i18n tests to this new format.
PR Close#39661
This commit implements partial compilation of components, together with
linking the partial declaration into its full AOT output.
This commit does not yet enable accurate source maps into external
templates. This requires additional work to account for escape sequences
which is non-trivial. Inline templates that were represented using a
string or template literal are transplated into the partial declaration
output, so their source maps should be accurate. Note, however, that
the accuracy of source maps is not currently verified in tests; this is
also left as future work.
The golden files of partial compilation output have been updated to
reflect the generated code for components. Please note that the current
output should not yet be considered stable.
PR Close#39707
In production mode this flag defaults to `true`, but the compliance
tests override this to `false` unless it is provided. As such, the
linker should also adhere to this default as otherwise the compilation
output would not align with the output of the full tests.
There are still tests that exercise the value of this flag, together
with it being `undefined` to verify the behavior of the actual default
value.
PR Close#39707
The linker does not currently support outputting ES5 syntax, so any
compliance tests that request ES5 output cannot be run in partial
compilation mode. This commit marks these tests as pending.
PR Close#39707
The JSON schema reference was off-by-one, preventing IDEs from finding
the file and offering suggestions and documentation. Additionally the
name of the golden file was slightly off.
PR Close#39707
If a template declares a reference to a missing target then referring to
that reference from elsewhere in the template would crash the template
type checker, due to a regression introduced in #38618. This commit
fixes the crash by ensuring that the invalid reference will resolve to
a variable of type any.
Fixes#39744
PR Close#39805
When the `preserveWhitespaces` is not true, the template parser will
process the parsed AST nodes to remove excess whitespace. Since the
generated `goog.getMsg()` statements rely upon the AST nodes after
this whitespace is removed, the i18n extraction must make a second pass.
Previously this resulted in innacurrate source-spans for the i18n text and
placeholder nodes that were extracted in the second pass.
This commit fixes this by reusing the source-spans from the first pass
when extracting the nodes in the second pass.
Fixes#39671
PR Close#39717
ngtsc has a robust suite of testing utilities, designed for in-memory
testing of a TypeScript compiler. Previously these utilities lived in the
`test` directory for the compiler-cli package.
This commit moves those utilities to an `ngtsc/testing` package, enabling
them to be depended on separately and opening the door for using them from
the upcoming language server testing infrastructure.
As part of this refactoring, the `fake_core` package (a lightweight API
replacement for @angular/core) is expanded to include functionality needed
for Language Service test use cases.
PR Close#39594
Currently when we encounter an implicit method call (e.g. `{{ foo(1) }}`) and we manage to resolve
its receiver to something within the template, we assume that the method is on the receiver itself
so we generate a type checking code to reflect it. This assumption is true in most cases, but it
breaks down if the call is on an implicit receiver and the receiver itself is being invoked. E.g.
```
<div *ngFor="let fn of functions">{{ fn(1) }}</div>
```
These changes resolve the issue by generating a regular function call if the method call's receiver
is pointing to `$implicit`.
Fixes#39634.
PR Close#39686
In order to more accurately map from a node in the TCB to a template position,
we need to provide more span information in the TCB. These changes are necessary
for the Language Service to map from a TCB node back to a specific
locations in the template for actions like "find references" and
"refactor/rename". After the TS "find references" returns results,
including those in the TCB, we need to map specifically to the matching
key/value spans in the template rather than the entire source span.
This also has the benefit of producing diagnostics which align more
closely with what TypeScript produces.
The following example shows TS code and the diagnostic produced by an invalid assignment to a property:
```
let a: {age: number} = {} as any;
a.age = 'laksjdf';
^^^^^ <-- Type 'string' is not assignable to type 'number'.
```
A corollary to this in a template file would be [age]="'someString'". The diagnostic we currently produce for this is:
```
Type 'number' is not assignable to type 'string'.
1 <app-hello [greeting]="1"></app-hello>
~~~~~~~~~~~~~~
```
Notice that the underlined text includes the entire span.
If we included the keySpan for the assignment to the property,
this diagnostic underline would be more similar to the one produced by TypeScript;
that is, it would only underline “greeting”.
[design/discussion doc]
(https://docs.google.com/document/d/1FtaHdVL805wKe4E6FxVTnVHl38lICoHIjS2nThtRJ6I/edit?usp=sharing)
PR Close#39665
ngtsc will avoid emitting generated imports that would create an import
cycle in the user's program. The main way such imports can arise is when
a component would ordinarily reference its dependencies in its component
definition `directiveDefs` and `pipeDefs`. This requires adding imports,
which run the risk of creating a cycle.
When ngtsc detects that adding such an import would cause this to occur, it
instead falls back on a strategy called "remote scoping", where a side-
effectful call to `setComponentScope` in the component's NgModule file is
used to patch `directiveDefs` and `pipeDefs` onto the component. Since the
NgModule file already imports all of the component's dependencies (to
declare them in the NgModule), this approach does not risk adding a cycle.
It has several large downsides, however:
1. it breaks under `sideEffects: false` logic in bundlers including the CLI
2. it breaks tree-shaking for the given component and its dependencies
See this doc for further details: https://hackmd.io/Odw80D0pR6yfsOjg_7XCJg?view
In particular, the impact on tree-shaking was exacerbated by the naive logic
ngtsc used to employ here. When this feature was implemented, at the time of
generating the side-effectful `setComponentScope` call, the compiler did not
know which of the component's declared dependencies were actually used in
its template. This meant that unlike the generation of `directiveDefs` in
the component definition itself, `setComponentScope` calls had to list the
_entire_ compilation scope of the component's NgModule, including directives
and pipes which were not actually used in the template. This made the tree-
shaking impact much worse, since if the component's NgModule made use of any
shared NgModules (e.g. `CommonModule`), every declaration therein would
become un-treeshakable.
Today, ngtsc does have the information on which directives/pipes are
actually used in the template, but this was not being used during the remote
scoping operation. This commit modifies remote scoping to take advantage of
the extra context and only list used dependencies in `setComponentScope`
calls, which should ameliorate the tree-shaking impact somewhat.
PR Close#39662
This commit adds bazel rules to test whether linking the golden partial
files for test cases produces the same output as a full compile of the
test case would.
PR Close#39617
This commit contains the basic runner logic and a couple of sample test cases
for the "full compile" compliance tests, where source files are compiled
to full definitions and checked against expectations.
PR Close#39617
This commit renames the original `compliance` test directory to `compliance_old`.
Eventually this directory will be deleted once all the tests have been
migrated to the new test case based compliance tests.
PR Close#39617
There is a compiler transform that downlevels Angular class decorators
to static properties so that metadata is available for JIT compilation.
The transform was supposed to ignore non-Angular decorators but it was
actually completely dropping decorators that did not conform to a very
specific syntactic shape (i.e. the decorator was a simple identifier, or
a namespaced identifier).
This commit ensures that all non-Angular decorators are kepts as-is
even if they are built using a syntax that the Angular compiler does not
understand.
Fixes#39574
PR Close#39577
In PR #38938 an additional Bazel target was introduced for the compliance
tests, as preparation to run the compliance tests in partial compilation
mode and then apply the linker transform. The linker plugin itself was
not available at the time but has since been implemented, so this commit
updates the prelink target of the compliance tests to apply the linker
transform using the Babel plugin.
Actually emitting partial compilations to be transformed will be done in
follow-up work.
PR Close#39518
When a class with a custom decorator is transpiled to ES5, it looks something like this:
```
var SomeClass = (function() {
function SomeClass() {...};
var SomeClass_1 = __decorate([Decorator()], SomeClass);
SomeClass = SomeClass_1;
return SomeClass;
})();
```
The problem is that if the class also has an Angular decorator that refers to the class itself
(e.g. `{provide: someToken, useClass: SomeClass}`), the generated `setClassMetadata` code will
be emitted after the IIFE, but will still refer to the intermediate `SomeClass_1` variable from
inside the IIFE. This happens, because we generate the `setClassMetadata` call directly from
the source AST which contains identifiers that TS will rename when it emits the ES5 code.
These changes resolve the issue by looking through the metadata AST and cloning any `Identifier`
that is referring to the class. Since TS doesn't have references to the clone, it won't rename
it when transpiling to ES5.
Fixes#39509.
PR Close#39527
Currently expressions `$event.foo()` and `this.$event.foo()`, as well as `$any(foo)` and
`this.$any(foo)`, are treated as the same expression by the compiler, because `this` is considered
the same implicit receiver as when the receiver is omitted. This introduces the following issues:
1. Any time something called `$any` is used, it'll be stripped away, leaving only the first parameter.
2. If something called `$event` is used anywhere in a template, it'll be preserved as `$event`,
rather than being rewritten to `ctx.$event`, causing the value to undefined at runtime. This
applies to listener, property and text bindings.
These changes resolve the first issue and part of the second one by preserving anything that
is accessed through `this`, even if it's one of the "special" ones like `$any` or `$event`.
Furthermore, these changes only expose the `$event` global variable inside event listeners,
whereas previously it was available everywhere.
Fixes#30278.
PR Close#39323
Currently `i18n` attributes are treated the same no matter if they have data bindings or not. This
both generates more code since they have to go through the `ɵɵi18nAttributes` instruction and
prevents the translated attributes from being injected using the `@Attribute` decorator.
These changes makes it so that static translated attributes are treated in the same way as regular
static attributes and all other `i18n` attributes go through the old code path.
Fixes#38231.
PR Close#39408
Previously directive "queries" that relied upon a namespaced type
```ts
queries: {
'mcontent': new core.ContentChild('test2'),
}
```
caused an error to be thrown. This is now supported.
PR Close#38959
Previously the `ConcreteDeclaration` and `InlineDeclaration` had
different properties for the underlying node type. And the `InlineDeclaration`
did not store a value that represented its declaration.
It turns out that a natural declaration node for an inline type is the
expression. For example in UMD/CommonJS this would be the `exports.<name>`
property access node.
So this expression is now used for the `node` of `InlineDeclaration` types
and the `expression` property is dropped.
To support this the codebase has been refactored to use a new `DeclarationNode`
type which is a union of `ts.Declaration|ts.Expression` instead of `ts.Declaration`
throughout.
PR Close#38959
Removes `ViewEncapsulation.Native` which has been deprecated for several major versions.
BREAKING CHANGES:
* `ViewEncapsulation.Native` has been removed. Use `ViewEncapsulation.ShadowDom` instead. Existing
usages will be updated automatically by `ng update`.
PR Close#38882
To verify the correctness of the linker output, we leverage the existing
compliance tests. The plan is to test the linker by running all compliance
tests using a full round trip of pre-linking and subsequently post-linking,
where the generated code should be identical to a full AOT compile.
This commit adds an additional Bazel target that runs the compliance
tests in partial mode. Follow-up work is required to implement the logic
for running the linker round trip.
PR Close#38938
With the introduction of incremental type checking in #36211, an
intermediate `ts.Program` for type checking is only created if there are
any templates to check. This rendered some tests ineffective at avoiding
regressions, as the intermediate `ts.Program` was required for the tests
to fail if the scenario under test would not be accounted for. This
commit adds a single component to these tests, to ensure the
intermediate `ts.Program` is in fact created.
PR Close#39011
Prior to this fix, incremental rebuilds could fail to type check due to
missing ambient types from auto-discovered declaration files in @types
directories, or type roots in general. This was caused by the
intermediary `ts.Program` that is created for template type checking,
for which a `ts.CompilerHost` was used which did not implement the
optional `directoryExists` methods. As a result, auto-discovery of types
would not be working correctly, and this would retain into the
`ts.Program` that would be created for an incremental rebuild.
This commit fixes the issue by forcing the custom `ts.CompilerHost` used
for type checking to properly delegate into the original
`ts.CompilerHost`, even for optional methods. This is accomplished using
a base class `DelegatingCompilerHost` which is typed in such a way that
newly introduced `ts.CompilerHost` methods must be accounted for.
Fixes#38979
PR Close#39011
We weren't resolving a path correctly which resulted in an error on Windows.
For reference, here's the error. Note the extra slash before `C:`:
```
Error: ENOENT: no such file or directory, scandir '/C:/bazel_output_root/yxvwd24o/external/npm/node_modules/typescript'
at Object.readdirSync (fs.js:854:3)
```
PR Close#39005
Prior to this change, each invocation of `loadStandardTestFiles` would
load the necessary files from disk. This function is typically called
at the top-level of a test module in order to share the result across
tests. The `//packages/compiler-cli/test/ngtsc` target has 8 modules
where this call occurs, each loading their own copy of
`node_modules/typescript` which is ~60MB in size, so the memory overhead
used to be significant. This commit loads the individual packages into
a standalone `Folder` and mounts this folder into the filesystem of
standard test files, such that all file contents are no longer
duplicated in memory.
PR Close#38909
Some compiler tests take a long time to run, even using multiple
executors. A profiling session revealed that most time is spent in
parsing source files, especially the default libraries are expensive to
parse.
The default library files are constant across all tests, so this commit
introduces a shared cache of parsed source files of the default
libraries. This achieves a significant improvement for several targets
on my machine:
//packages/compiler-cli/test/compliance: from 23s to 5s.
//packages/compiler-cli/test/ngtsc: from 115s to 11s.
Note that the number of shards for the compliance tests has been halved,
as the extra shards no longer provide any speedup.
PR Close#38909
In Ivy, template type-checking has 3 modes: basic, full, and strict. The
primary difference between basic and full modes is that basic mode only
checks the top-level template, whereas full mode descends into nested
templates (embedded views like ngIfs and ngFors). Ivy applies this approach
to all of its template type-checking, including the DOM schema checks which
validate whether an element is a valid component/directive or not.
View Engine has both the basic and the full mode, with the same distinction.
However in View Engine, DOM schema checks happen for the full template even
in the basic mode.
Ivy's behavior here is technically a "fix" as it does not make sense for
some checks to apply to the full template and others only to the top-level
view. However, since g3 relies exclusively on the basic mode of checking and
developers there are used to DOM checks applying throughout their template,
this commit re-enables the nested schema checks even in basic mode only in
g3. This is done by enabling the checks only when Closure Compiler
annotations are requested.
Outside of g3, it's recommended that applications use at least the full mode
of checking (controlled by the `fullTemplateTypeCheck` flag), and ideally
the strict mode (`strictTemplates`).
PR Close#38943
When the target of the compiler is ES2015 or newer then we should
be generating `let` and `const` variable declarations rather than `var`.
PR Close#38775
Common AST formats such as TS and Babel do not use a separate
node for comments, but instead attach comments to other AST nodes.
Previously this was worked around in TS by creating a `NotEmittedStatement`
AST node to attach the comment to. But Babel does not have this facility,
so it will not be a viable approach for the linker.
This commit refactors the output AST, to remove the `CommentStmt` and
`JSDocCommentStmt` nodes. Instead statements have a collection of
`leadingComments` that are rendered/attached to the final AST nodes
when being translated or printed.
PR Close#38811
The type-to-value conversion could previously crash if a symbol was
resolved that does not have any declarations, e.g. because it's imported
from a missing module. This would typically result in a semantic
TypeScript diagnostic and halt further compilation, therefore not
reaching the type-to-value conversion logic. In Bazel however, it turns
out that Angular semantic diagnostics are requested even if there are
semantic TypeScript errors in the program, so it would then reach the
type-to-value conversation and crash.
This commit fixes the unsafe access and adds a test that ignores the
TypeScript semantic error, effectively replicating the situation as
experienced under Bazel.
Fixes#38670
PR Close#38684
Previously, localized strings had very limited or incorrect source-mapping
information available.
Now the i18n AST nodes and related output AST nodes include source-span
information about message-parts and placeholders - including closing tag
placeholders.
This information is then used when generating the final localized string
ASTs to ensure that the correct source-mapping is rendered.
See #38588 (comment)
PR Close#38645
Previously, the compiler was not able to display template parsing errors as
true `ts.Diagnostic`s that point inside the template. Instead, it would
throw an actual `Error`, and "crash" with a stack trace containing the
template errors.
Not only is this a poor user experience, but it causes the Language Service
to also crash as the user is editing a template (in actuality the LS has to
work around this bug).
With this commit, such parsing errors are converted to true template
diagnostics with appropriate span information to be displayed contextually
along with all other diagnostics. This majorly improves the user experience
and unblocks the Language Service from having to deal with the compiler
"crashing" to report errors.
PR Close#38576
Previously, the `sourceSpan` and `startSourceSpan` were the same
object, which meant that you had the following situation:
```
element = <div>some content</div>
sourceSpan = <div>
startSourceSpan = <div>
endSourceSpan = </div>
```
This made `sourceSpan` redundant and meant that if you
wanted a span for the whole element including its content
and closing tag, it had to be computed.
Now `sourceSpan` is separated from `startSourceSpan`
resulting in:
```
element = <div>some content</div>
sourceSpan = <div>some content</div>
startSourceSpan = <div>
endSourceSpan = </div>
```
PR Close#38581
The HTML parser gets an element's namespace either from the tag name
(e.g. `<svg:rect>`) or from its parent element `<svg><rect></svg>`) which
breaks down when an element is inside of an SVG `foreignElement`,
because foreign elements allow nodes from a different namespace to be
inserted into an SVG.
These changes add another flag to the tag definitions which tells child
nodes whether to try to inherit their namespaces from their parents.
It also adds a definition for `foreignObject` with the new flag,
allowing elements placed inside it to infer their namespaces instead.
Fixes#37218.
PR Close#38477
We had a couple of places where we were assuming that if a particular
symbol has a value, then it will exist at runtime. This is true in most cases,
but it breaks down for `const` enums.
Fixes#38513.
PR Close#38542
This commit updates the code to move generated i18n statements into the `consts` field of
ComponentDef to avoid invoking `$localize` function before component initialization (to better
support runtime translations) and also avoid problems with lazy-loading when i18n defs may not
be present in a chunk where it's referenced.
Prior to this change the i18n statements were generated at the top leve:
```
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
defineComponent({
// ...
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, I18N_0);
}
});
```
This commit updates the logic to generate the following code instead:
```
defineComponent({
// ...
consts: function() {
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
return [
I18N_0
];
},
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, 0);
}
});
```
Also note that i18n template instructions now refer to the `consts` array using an index
(similar to other template instructions).
PR Close#38404
The compiler does not currently report errors when there's an `@Input()`
for a `private`, `protected`, or `readonly` directive/component class member.
This change adds an option to enable reporting errors when a template
attempts to bind to one of these restricted input fields.
PR Close#38249
Prior to this change, the template type checker would always use a
type-constructor to instantiate a directive. This type-constructor call
serves two purposes:
1. Infer any generic types for the directive instance from the inputs
that are passed in.
2. Type check the inputs that are passed into the directive's inputs.
The first purpose is only relevant when the directive actually has any
generic types and using a type-constructor for these cases inhibits
a type-check performance penalty, as a type-constructor's signature is
quite complex and needs to be generated for each directive.
This commit refactors the generated type-check blocks to only generate
a type-constructor call for directives that have generic types. Type
checking of inputs is achieved by generating individual statements for
all inputs, using assignments into the directive's fields.
Even if a type-constructor is used for type-inference of generic types
will the input checking also be achieved using the individual assignment
statements. This is done to support the rework of the language service,
which will start to extract symbol information from the type-check
blocks.
As a future optimization, it may be possible to reduce the number of
inputs passed into a type-constructor to only those inputs that
contribute the the type-inference of the generics. As this is not a
necessity at the moment this is left as follow-up work.
Closes#38185
PR Close#38249
In TypeScript 3.8 support was added for type-only imports, which only brings in
the symbol as a type, not their value. The Angular compiler did not yet take
the type-only keyword into account when representing symbols in type positions
as value expressions. The class metadata that the compiler emits would include
the value expression for its parameter types, generating actual imports as
necessary. For type-only imports this should not be done, as it introduces an
actual import of the module that was originally just a type-only import.
This commit lets the compiler deal with type-only imports specially, preventing
a value expression from being created.
Fixes#37900
PR Close#37912
When using the safe navigation operator in a binding expression, a temporary
variable may be used for storing the result of a side-effectful call.
For example, the following template uses a pipe and a safe property access:
```html
<app-person-view [enabled]="enabled" [firstName]="(person$ | async)?.name"></app-person-view>
```
The result of the pipe evaluation is stored in a temporary to be able to check
whether it is present. The temporary variable needs to be declared in a separate
statement and this would also cause the full expression itself to be pulled out
into a separate statement. This would compile into the following
pseudo-code instructions:
```js
var temp = null;
var firstName = (temp = pipe('async', ctx.person$)) == null ? null : temp.name;
property('enabled', ctx.enabled)('firstName', firstName);
```
Notice that the pipe evaluation happens before evaluating the `enabled` binding,
such that the runtime's internal binding index would correspond with `enabled`,
not `firstName`. This introduces a problem when the pipe uses `WrappedValue` to
force a change to be detected, as the runtime would then mark the binding slot
corresponding with `enabled` as dirty, instead of `firstName`. This results
in the `enabled` binding to be updated, triggering setters and affecting how
`OnChanges` is called.
In the pseudo-code above, the intermediate `firstName` variable is not strictly
necessary---it only improved readability a bit---and emitting it inline with
the binding itself avoids the out-of-order execution of the pipe:
```js
var temp = null;
property('enabled', ctx.enabled)
('firstName', (temp = pipe('async', ctx.person$)) == null ? null : temp.name);
```
This commit introduces a new `BindingForm` that results in the above code to be
generated and adds compiler and acceptance tests to verify the proper behavior.
Fixes#37194
PR Close#37911
For attribute bindings that target a directive's input, the template
type checker is able to verify that the type of the input expression is
compatible with the directive's declaration for said input. This
checking adheres to the `strictNullChecks` flag as configured in the
TypeScript compilation, such that errors are reported for expressions
that include `undefined` or `null` in their type if the input's
declaration does not include those types.
There was a bug with this level of type-checking for directives that
also declare coercion members, where binding an expression that includes
the `undefined` type to a directive's input that does not include the
`undefined` type would not be reported as error.
This commit fixes the bug by changing the type-constructor in type-check
code to use an intersection type of regular inputs and coerced inputs,
instead of a union type. The union type would inadvertently allow
`undefined` types to be assigned into the regular inputs, as that would
still satisfy the characteristics of a union type.
As a result of this change, you may start to see build failures if
`strictTemplates` is enabled and `strictInputTypes` is not disabled.
These errors are legitimate and some action is required to achieve a
successful build:
1. Update the templates for which an error is reported and introduce the
non-null assertion operator at the end of the expression. This
removes the `undefined` type from the expression's type, making it
appear as a valid assignment.
2. Disable `strictNullInputTypes` in the compiler options. This will
implicitly add the non-null assertion operators similar to option 1,
but all templates in the compilation are affected.
3. Update the directive's input declaration to include the `undefined`
type, if the directive is not implemented in an external library.
PR Close#38273
Roll forward of #38147.
This allows Closure compiler to tree shake unused constructor calls to `NgModuleFactory`, which is otherwise considered
side-effectful. The Angular compiler generates factory objects which are exported but typically not used, as they are
only needed for compatibility with View Engine. This results in top-level constructor calls, such as:
```typescript
export const FooNgFactory = new NgModuleFactory(Foo);
```
`NgModuleFactory` has a side-effecting constructor, so this statement cannot be tree shaken, even if `FooNgFactory` is
never imported. The `NgModuleFactory` continues to reference its associated `NgModule` and prevents the module and all
its unused dependencies from being tree shaken, making Closure builds significantly larger than necessary.
The fix here is to wrap `NgModuleFactory` constructor with `noSideEffects(() => /* ... */)`, which tricks the Closure
compiler into assuming that the invoked function has no side effects. This allows it to tree-shake unused
`NgModuleFactory()` constructors when they aren't imported. Since the factory can be removed, the module can also be
removed (if nothing else references it), thus tree shaking unused dependencies as expected.
The one notable edge case is for lazy loaded modules. Internally, lazy loading is done as a side effect when the lazy
script is evaluated. For Angular, this side effect is registering the `NgModule`. In Ivy this is done by the
`NgModuleFactory` constructor, so lazy loaded modules **cannot** have their top-level `NgModuleFactory` constructor
call tree shaken. We handle this case by looking for the `id` field on `@NgModule` annotations. All lazy loaded modules
include an `id`. When this `id` is found, the `NgModuleFactory` is generated **without** with `noSideEffects()` call,
so Closure will not tree shake it and the module will lazy-load correctly.
PR Close#38320
Currently the `getInheritedFactory` function is implemented to allow
closure to remove the call if the base factory is unused. However, this
method does not work with terser. By adding the PURE annotation,
terser will also be able to remove the call when unused.
PR Close#38291
This reverts commit 7f8c2225f2.
This commit caused test failures internally, which were traced back to the
optimizer removing NgModuleFactory constructor calls when those calls caused
side-effectful registration of NgModules by their ids.
PR Close#38303
This allows Closure compiler to tree shake unused constructor calls to `NgModuleFactory`, which is otherwise considered
side-effectful. The Angular compiler generates factory objects which are exported but typically not used, as they are
only needed for compatibility with View Engine. This results in top-level constructor calls, such as:
```typescript
export const FooNgFactory = new NgModuleFactory(Foo);
```
`NgModuleFactory` has a side-effecting constructor, so this statement cannot be tree shaken, even if `FooNgFactory` is
never imported. The `NgModuleFactory` continues to reference its associated `NgModule` and prevents the module and all
its unused dependencies from being tree shaken. This effectively prevents all components from being tree shaken, making
Closure builds significantly larger than they should be.
The fix here is to wrap `NgModuleFactory` constructor with `noSideEffects(() => /* ... */)`, which tricks the Closure
compiler into assuming that the invoked function has no side effects. This allows it to tree-shake unused
`NgModuleFactory()` constructors when they aren't imported. Since the factory can be removed, the module can also be
removed (if nothing else references it), thus tree shaking unused components as expected.
PR Close#38147
Large strings constants are now wrapped in a function which is called whenever used. This works around a unique
limitation of Closure, where it will **always** inline string literals at **every** usage, regardless of how large the
string literal is or how many times it is used.The workaround is to use a function rather than a string literal.
Closure has differently inlining semantics for functions, where it will check the length of the function and the number
of times it is used before choosing to inline it. By using a function, `ngtsc` makes Closure more conservative about
inlining large strings, and avoids blowing up the bundle size.This optimization is only used if the constant is a large
string. A wrapping function is not included for other use cases, since it would just increase the bundle size and add
unnecessary runtime performance overhead.
PR Close#38253
When the `NgIf` directive is used in a template, its context variables
can be used to capture the bound value. This is sometimes used in
complex expressions, where the resulting value is captured in a
context variable. There's two syntax forms available:
1. Binding to `NgIfContext.ngIf` using the `as` syntax:
```html
<span *ngIf="enabled && user as u">{{u.name}}</span>
```
2. Binding to `NgIfContext.$implicit` using the `let` syntax:
```html
<span *ngIf="enabled && user; let u">{{u.name}}</span>
```
Because of the semantics of `ngIf`, it is known that the captured
context variable is truthy, however the template type checker
would not consider them as such and still report errors when
`strict` is enabled.
This commit updates `NgIf`'s context guard to make the types of the
context variables truthy, avoiding the issue.
Based on https://github.com/angular/angular/pull/35125
PR Close#36627
Prior to this commit, duplicated styles defined in multiple components in the same file were not
shared between components, thus causing extra payload size. This commit updates compiler logic to
use `ConstantPool` for the styles (while generating the `styles` array on component def), which
enables styles sharing when needed (when duplicates styles are present).
Resolves#38204.
PR Close#38213
This commit updates synthetic host property and listener instruction names to better align with other instructions.
The `ɵɵupdateSyntheticHostBinding` instruction was renamed to `ɵɵsyntheticHostProperty` (to match the `ɵɵhostProperty`
instruction name) and `ɵɵcomponentHostSyntheticListener` was renamed to `ɵɵsyntheticHostListener` since this
instruction is generated for both Components and Directives (so 'component' is removed from the name).
This PR is a followup after PR #35568.
PR Close#37145
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
The `fs.relative()` method assumed that the file-system is a single tree,
which is not the case in Windows, where you can have multiple drives,
e.g. `C:`, `D:` etc.
This commit changes `fs.relative()` so that it no longer forces the result
to be a `PathSegment` and then flows that refactoring through the rest of
the compiler-cli (and ngcc). The main difference is that now, in some cases,
we needed to check whether the result is "rooted", i.e an `AbsoluteFsPath`,
rather than a `PathSegment`, before using it.
Fixes#36777
PR Close#37959
Builds on top of #34655 to support more cases that could be using a pipe inside host bindings (e.g. ternary expressions or function calls).
Fixes#37610.
PR Close#37883
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
During AOT compilation, the value of some expressions need to be known at
compile time. The compiler has the ability to statically evaluate expressions
the best it can, but there can be occurrences when an expression cannot be
evaluated statically. For instance, the evaluation could depend on a dynamic
value or syntax is used that the compiler does not understand. Alternatively,
it is possible that an expression could be statically evaluated but the
resulting value would be of an incorrect type.
In these situations, it would be helpful if the compiler could explain why it
is unable to evaluate an expression. To this extend, the static interpreter
in Ivy keeps track of a trail of `DynamicValue`s which follow the path of nodes
that were considered all the way to the node that causes an expression to be
considered dynamic. Up until this commit, this rich trail of information was
not surfaced to a developer so the compiler was of little help to explain
why static evaluation failed, resulting in situations that are hard to debug
and resolve.
This commit adds much more insight to the diagnostic that is produced for static
evaluation errors. For dynamic values, the trail of `DynamicValue` instances
is presented to the user in a meaningful way. If a value is available but not
of the correct type, the type of the resolved value is shown.
Resolves FW-2155
PR Close#37587
Commit 4213e8d5 introduced shim reference tagging into the compiler, and
changed how the `TypeCheckProgramHost` worked under the hood during the
creation of a template type-checking program. This work enabled a more
incremental flow for template type-checking, but unintentionally introduced
several regressions in performance, caused by poor incrementality during
`ts.Program` creation.
1. The `TypeCheckProgramHost` was made to rely on the `ts.CompilerHost` to
retrieve instances of `ts.SourceFile`s from the original program. If the
host does not return the original instance of such files, but instead
creates new instances, this has two negative effects: it incurs
additional parsing time, and it interferes with TypeScript's ability to
reuse information about such files.
2. During the incremental creation of a `ts.Program`, TypeScript compares
the `referencedFiles` of `ts.SourceFile` instances from the old program
with those in the new program. If these arrays differ, TypeScript cannot
fully reuse the old program. The implementation of reference tagging
introduced in 4213e8d5 restores the original `referencedFiles` array
after a `ts.Program` is created, which means that future incremental
operations involving that program will always fail this comparison,
effectively limiting the incrementality TypeScript can achieve.
Problem 1 exacerbates problem 2: if a new `ts.SourceFile` is created by the
host after shim generation has been disabled, it will have an untagged
`referencedFiles` array even if the original file's `referencedFiles` was
not restored, triggering problem 2 when creating the template type-checking
program.
To fix these issues, `referencedFiles` arrays are now restored on the old
`ts.Program` prior to the creation of a new incremental program. This allows
TypeScript to get the most out of reusing the old program's data.
Additionally, the `TypeCheckProgramHost` now uses the original `ts.Program`
to retrieve original instances of `ts.SourceFile`s where possible,
preventing issues when a host would otherwise return fresh instances.
Together, these fixes ensure that program reuse is as incremental as
possible, and tests have been added to verify this for certain scenarios.
An optimization was further added to prevent the creation of a type-checking
`ts.Program` in the first place if no type-checking is necessary.
PR Close#37641
We recently added a transformer to NGC that is responsible for downleveling Angular
decorators and constructor parameter types. The primary goal was to mitigate a
TypeScript limitation/issue that surfaces in Angular projects due to the heavy
reliance on type metadata being captured for DI. Additionally this is a pre-requisite
of making `tsickle` optional in the Angular bazel toolchain.
See: 401ef71ae5 for more context on this.
Another (less important) goal was to make sure that the CLI can re-use
this transformer for its JIT mode compilation. The CLI (as outlined in
the commit mentioned above), already has a transformer for downleveling
constructor parameters. We want to avoid this duplication and exported
the transform through the tooling-private compiler entry-point.
Early experiments in using this transformer over the current one, highlighted
that in JIT, class decorators cannot be downleveled. Angular relies on those
to be invoked immediately for JIT (so that factories etc. are generated upon loading)
The transformer we exposed, always downlevels such class decorators
though, so that would break CLI's JIT mode. We can address the CLI's
needs by adding another flag to skip class decorators. This will allow
us to continue with the goal of de-duplication.
PR Close#37545
Previously, when an entry-point was ignored via an ngcc config, ngcc
would scan sub-directories for sub-entry-points, but would not use the
correct `packagePath`. For example, if `@angular/common` was ignored, it
would look at `@angular/common/http` but incorrectly use
`.../@angular/common/http` as the `packagePath` (instead of
`.../@angular/common`). As a result, it would not retrieve the correct
ngcc config for the actual package.
This commit fixes it by ensuring the correct `packagePath` is used, even
if the primary entry-point corresponding to that path is ignored. In
order to do this, a new return value for `getEntryPointInfo()` is added:
`IGNORED_ENTRY_POINT`. This is used to differentiate between directories
that correspond to no or an incompatible entry-point and those that
correspond to an entry-point that could otherwise be valid but is
explicitly ignored. Consumers of `getEntryPointInfo()` can then use this
info to discard ignored entry-points, but still use the correct
`packagePath` when scanning their sub-directories for secondary
entry-points.
PR Close#37040
Currently Angular internally already handles `InjectionToken` as
predicates for queries. This commit exposes this as public API as
developers already relied on this functionality but currently use
workarounds to satisfy the type constraints (e.g. `as any`).
We intend to make this public as it's low-effort to support, and
it's a significant key part for the use of light-weight tokens as
described in the upcoming guide: https://github.com/angular/angular/pull/36144.
In concrete, applications might use injection tokens over classes
for both optional DI and queries, because otherwise such references
cause classes to be always retained. This was also an issue in View
Engine, but now with Ivy, this pattern became worse, as factories are
directly attached to retained classes (ultimately ending up in the
production bundle, while being unused).
More details in the light-weight token guide and in: https://github.com/angular/angular-cli/issues/16866.
Closes#21152. Related to #36144.
PR Close#37506
In v7 of Angular we removed `tsickle` from the default `ngc` pipeline.
This had the negative potential of breaking ES2015 output and SSR due
to a limitation in TypeScript.
TypeScript by default preserves type information for decorated constructor
parameters when `emitDecoratorMetadata` is enabled. For example,
consider this snippet below:
```
@Directive()
export class MyDirective {
constructor(button: MyButton) {}
}
export class MyButton {}
```
TypeScript would generate metadata for the `MyDirective` class it has
a decorator applied. This metadata would be needed in JIT mode, or
for libraries that provide `MyDirective` through NPM. The metadata would
look as followed:
```
let MyDirective = class MyDir {}
MyDirective = __decorate([
Directive(),
__metadata("design:paramtypes", [MyButton]),
], MyDirective);
let MyButton = class MyButton {}
```
Notice that TypeScript generated calls to `__decorate` and
`__metadata`. These calls are needed so that the Angular compiler
is able to determine whether `MyDirective` is actually an directive,
and what types are needed for dependency injection.
The limitation surfaces in this concrete example because `MyButton`
is declared after the `__metadata(..)` call, while `__metadata`
actually directly references `MyButton`. This is illegal though because
`MyButton` has not been declared at this point. This is due to the
so-called temporal dead zone in JavaScript. Errors like followed will
be reported at runtime when such file/code evaluates:
```
Uncaught ReferenceError: Cannot access 'MyButton' before initialization
```
As noted, this is a TypeScript limitation because ideally TypeScript
shouldn't evaluate `__metadata`/reference `MyButton` immediately.
Instead, it should defer the reference until `MyButton` is actually
declared. This limitation will not be fixed by the TypeScript team
though because it's a limitation as per current design and they will
only revisit this once the tc39 decorator proposal is finalized
(currently stage-2 at time of writing).
Given this wontfix on the TypeScript side, and our heavy reliance on
this metadata in libraries (and for JIT mode), we intend to fix this
from within the Angular compiler by downleveling decorators to static
properties that don't need to evaluate directly. For example:
```
MyDirective.ctorParameters = () => [MyButton];
```
With this snippet above, `MyButton` is not referenced directly. Only
lazily when the Angular runtime needs it. This mitigates the temporal
dead zone issue caused by a limitation in TypeScript's decorator
metadata output. See: https://github.com/microsoft/TypeScript/issues/27519.
In the past (as noted; before version 7), the Angular compiler by
default used tsickle that already performed this transformation. We
moved the transformation to the CLI for JIT and `ng-packager`, but now
we realize that we can move this all to a single place in the compiler
so that standalone ngc consumers can benefit too, and that we can
disable tsickle in our Bazel `ngc-wrapped` pipeline (that currently
still relies on tsickle to perform this decorator processing).
This transformation also has another positive side-effect of making
Angular application/library code more compatible with server-side
rendering. In principle, TypeScript would also preserve type information
for decorated class members (similar to how it did that for constructor
parameters) at runtime. This becomes an issue when your application
relies on native DOM globals for decorated class member types. e.g.
```
@Input() panelElement: HTMLElement;
```
Your application code would then reference `HTMLElement` directly
whenever the source file is loaded in NodeJS for SSR. `HTMLElement`
does not exist on the server though, so that will become an invalid
reference. One could work around this by providing global mocks for
these DOM symbols, but that doesn't match up with other places where
dependency injection is used for mocking DOM/browser specific symbols.
More context in this issue: #30586. The TL;DR here is that the Angular
compiler does not care about types for these class members, so it won't
ever reference `HTMLElement` at runtime.
Fixes#30106. Fixes#30586. Fixes#30141.
Resolves FW-2196. Resolves FW-2199.
PR Close#37382
When the compiler encounters a function call within an NgModule imports
section, it attempts to resolve it to an NgModule-annotated class by
looking at the function body and evaluating the statements there. This
evaluation can only understand simple functions which have a single
return statement as their body. If the function the user writes is more
complex than that, the compiler won't be able to understand it and
previously the PartialEvaluator would return a "DynamicValue" for
that import.
With this change, in the event the function body resolution fails the
PartialEvaluator will now attempt to use its foreign function resolvers to
determine the correct result from the function's type signtaure instead. If
the function is annotated with a correct ModuleWithProviders type, the
compiler will be able to understand the import without static analysis of
the function body.
PR Close#37126
In some versions of TypeScript, the transformation of synthetic
`$localize` tagged template literals is broken.
See https://github.com/microsoft/TypeScript/issues/38485
We now compute what the expected final output target of the
compilation will be so that we can generate ES5 compliant
`$localize` calls instead of relying upon TS to do the downleveling
for us.
This is a workaround for the TS compiler bug, which could be removed
when this is fixed. But since it only affects ES5 targeted compilations,
which is now not the norm, it has limited impact on the majority of
Angular projects. So this fix can probably be left in indefinitely.
PR Close#36989
In 420b9be1c1 all style-based sanitization code was
disabled because modern browsers no longer allow for javascript expressions within
CSS. This patch is a follow-up patch which removes all traces of style sanitization
code (both instructions and runtime logic) for the `[style]` and `[style.prop]` bindings.
PR Close#36965
ASTs for property read and method calls contain information about
the entire span of the expression, including its receiver. Use cases
like a language service and compile error messages may be more
interested in the span of the direct identifier for which the
expression is constructed (i.e. an accessed property). To support this,
this commit adds a `nameSpan` property on
- `PropertyRead`s
- `SafePropertyRead`s
- `PropertyWrite`s
- `MethodCall`s
- `SafeMethodCall`s
The `nameSpan` property already existed for `BindingPipe`s.
This commit also updates usages of these expressions' `sourceSpan`s in
Ngtsc and the langauge service to use `nameSpan`s where appropriate.
PR Close#36826
Some projects include .js source files (via the TypeScript allowJs option).
Previously, the compiler would attempt to tag these files for shims, which
caused errors as the regex used to create shim filenames assumes a .ts file.
This commit fixes the bug by filtering out non-ts files during tagging.
PR Close#36987
Previously in v9, we deprecated the pattern of undecorated base classes
that rely on Angular features. We ran a migration for this in version 9
and will run the same on in version 10 again.
To ensure that projects do not regress and start using the unsupported
pattern again, we report an error in ngtsc if such undecorated classes
are discovered.
We keep the compatibility code enabled in ngcc so that libraries
can be still be consumed, even if they have not been migrated yet.
Resolves FW-2130.
PR Close#36921
We can remove all of the entry point resolution configuration from the package.json
in our source code as ng_package rule adds the properties automatically and correctly
configures them.
This change simplifies our code base but doesn't have any impact on the package.json
in the distributed npm_packages.
PR Close#36944
This optimization builds on a lot of prior work to finally make type-
checking of templates incremental.
Incrementality requires two main components:
- the ability to reuse work from a prior compilation.
- the ability to know when changes in the current program invalidate that
prior work.
Prior to this commit, on every type-checking pass the compiler would
generate new .ngtypecheck files for each original input file in the program.
1. (Build #1 main program): empty .ngtypecheck files generated for each
original input file.
2. (Build #1 type-check program): .ngtypecheck contents overridden for those
which have corresponding components that need type-checked.
3. (Build #2 main program): throw away old .ngtypecheck files and generate
new empty ones.
4. (Build #2 type-check program): same as step 2.
With this commit, the `IncrementalDriver` now tracks template type-checking
_metadata_ for each input file. The metadata contains information about
source mappings for generated type-checking code, as well as some
diagnostics which were discovered at type-check analysis time. The actual
type-checking code is stored in the TypeScript AST for type-checking files,
which is now re-used between programs as follows:
1. (Build #1 main program): empty .ngtypecheck files generated for each
original input file.
2. (Build #1 type-check program): .ngtypecheck contents overridden for those
which have corresponding components that need type-checked, and the
metadata registered in the `IncrementalDriver`.
3. (Build #2 main program): The `TypeCheckShimGenerator` now reuses _all_
.ngtypecheck `ts.SourceFile` shims from build #1's type-check program in
the construction of build #2's main program. Some of the contents of
these files might be stale (if a component's template changed, for
example), but wholesale reuse here prevents unnecessary changes in the
contents of the program at this point and makes TypeScript's job a lot
easier.
4. (Build #2 type-check program): For those input files which have not
"logically changed" (meaning components within are semantically the same
as they were before), the compiler will re-use the type-check file
metadata from build #1, and _not_ generate a new .ngtypecheck shim.
For components which have logically changed or where the previous
.ngtypecheck contents cannot otherwise be reused, code generation happens
as before.
PR Close#36211
As a performance optimization, this commit splits the single
__ngtypecheck__.ts file which was previously added to the user's program as
a container for all template type-checking code into multiple .ngtypecheck
shim files, one for each original file in the user's program.
In larger applications, the generation, parsing, and checking of this single
type-checking file was a huge performance bottleneck, with the file often
exceeding 1 MB in text content. Particularly in incremental builds,
regenerating this single file for the entire application proved especially
expensive.
This commit introduces a new strategy for template type-checking code which
makes use of a new interface, the `TypeCheckingProgramStrategy`. This
interface abstracts the process of creating a new `ts.Program` to type-check
a particular compilation, and allows the mechanism there to be kept separate
from the more complex logic around dealing with multiple .ngtypecheck files.
A new `TemplateTypeChecker` hosts that logic and interacts with the
`TypeCheckingProgramStrategy` to actually generate and return diagnostics.
The `TypeCheckContext` class, previously the workhorse of template type-
checking, is now solely focused on collecting and generating type-checking
file contents.
A side effect of implementing the new `TypeCheckingProgramStrategy` in this
way is that the API is designed to be suitable for use by the Angular
Language Service as well. The LS also needs to type-check components, but
has its own method for constructing a `ts.Program` with type-checking code.
Note that this commit does not make the actual checking of templates at all
_incremental_ just yet. That will happen in a future commit.
PR Close#36211
Shim generation was built on a lie.
Shims are files added to the program which aren't original files authored by
the user, but files authored effectively by the compiler. These fall into
two categories: files which will be generated (like the .ngfactory shims we
generate for View Engine compatibility) as well as files used internally in
compilation (like the __ng_typecheck__.ts file).
Previously, shim generation was driven by the `rootFiles` passed to the
compiler as input. These are effectively the `files` listed in the
`tsconfig.json`. Each shim generator (e.g. the `FactoryGenerator`) would
examine the `rootFiles` and produce a list of shim file names which it would
be responsible for generating. These names would then be added to the
`rootFiles` when the program was created.
The fatal flaw here is that `rootFiles` does not always account for all of
the files in the program. In fact, it's quite rare that it does. Users don't
typically specify every file directly in `files`. Instead, they rely on
TypeScript, during program creation, starting with a few root files and
transitively discovering all of the files in the program.
This happens, however, during `ts.createProgram`, which is too late to add
new files to the `rootFiles` list.
As a result, shim generation was only including shims for files actually
listed in the `tsconfig.json` file, and not for the transitive set of files
in the user's program as it should.
This commit completely rewrites shim generation to use a different technique
for adding files to the program, inspired by View Engine's shim generator.
In this new technique, as the program is being created and `ts.SourceFile`s
are being requested from the `NgCompilerHost`, shims for those files are
generated and a reference to them is patched onto the original file's
`ts.SourceFile.referencedFiles`. This causes TS to think that the original
file references the shim, and causes the shim to be included in the program.
The original `referencedFiles` array is saved and restored after program
creation, hiding this little hack from the rest of the system.
The new shim generation engine differentiates between two kinds of shims:
top-level shims (such as the flat module entrypoint file and
__ng_typecheck__.ts) and per-file shims such as ngfactory or ngsummary
files. The former are included via `rootFiles` as before, the latter are
included via the `referencedFiles` of their corresponding original files.
As a result of this change, shims are now correctly generated for all files
in the program, not just the ones named in `tsconfig.json`.
A few mitigating factors prevented this bug from being realized until now:
* in g3, `files` does include the transitive closure of files in the program
* in CLI apps, shims are not really used
This change also makes use of a novel technique for associating information
with source files: the use of an `NgExtension` `Symbol` to patch the
information directly onto the AST object. This is used in several
circumstances:
* For shims, metadata about a `ts.SourceFile`'s status as a shim and its
origins are held in the extension data.
* For original files, the original `referencedFiles` are stashed in the
extension data for later restoration.
The main benefit of this technique is a lot less bookkeeping around `Map`s
of `ts.SourceFile`s to various kinds of data, which need to be tracked/
invalidated as part of incremental builds.
This technique is based on designs used internally in the TypeScript
compiler and is serving as a prototype of this design in ngtsc. If it works
well, it could have benefits across the rest of the compiler.
PR Close#36211
The compiler needs to track the dependencies of a component, including any
NgModules which happen to be present in a component's scope. If an upstream
NgModule changes, any downstream components need to have their templates
re-compiled and re-typechecked.
Previously, the compiler handled this well for the A -> B -> C case where
module A imports module B which re-exports module C. However, it fell apart
in the A -> B -> C -> D case, because previously tracking focused on changes
to components/directives in the scope, and not NgModules specifically.
This commit introduces logic to track which NgModules contributed to a given
scope, and treat them as dependencies of any components within.
This logic also contains a bug, which is intentional for now. It
purposefully does not track transitive dependencies of the NgModules which
contribute to a scope. If it did, using the current dependency system, this
would treat all components and directives (even those not exported into the
scope) as dependencies, causing a major performance bottleneck. Only those
dependencies which contributed to the module's export scope should be
considered, but the current system is incapable of making this distinction.
This will be fixed at a later date.
PR Close#36211
The html parser already normalizes line endings (converting `\r\n` to `\n`)
for most text in templates but it was missing the expressions of ICU expansions.
In ViewEngine backticked literal strings, used to define inline templates,
were already normalized by the TypeScript parser.
In Ivy we are parsing the raw text of the source file directly so the line
endings need to be manually normalized.
This change ensures that inline templates have the line endings of ICU
expression normalized correctly, which matches the ViewEngine.
In ViewEngine external templates, defined in HTML files, the behavior was
different, since TypeScript was not normalizing the line endings.
Specifically, ICU expansion "expressions" are not being normalized.
This is a problem because it means that i18n message ids can be different on
different machines that are setup with different line ending handling,
or if the developer moves a template from inline to external or vice versa.
The goal is always to normalize line endings, whether inline or external.
But this would be a breaking change since it would change i18n message ids
that have been previously computed. Therefore this commit aligns the ivy
template parsing to have the same "buggy" behavior for external templates.
There is now a compiler option `i18nNormalizeLineEndingsInICUs`, which
if set to `true` will ensure the correct non-buggy behavior. For the time
being this option defaults to `false` to ensure backward compatibility while
allowing opt-in to the desired behavior. This option's default will be
flipped in a future breaking change release.
Further, when this option is set to `false`, any ICU expression tokens,
which have not been normalized, are added to the `ParseResult` from the
`HtmlParser.parse()` method. In the future, this collection of tokens could
be used to diagnose and encourage developers to migrate their i18n message
ids. See FW-2106.
Closes#36725
PR Close#36741
Prior to this change, there was a problem while matching template attributes, which mistakenly took i18n attributes (that might be present in attrs array after template ones) into account. This commit updates the logic to avoid template attribute matching logic from entering the i18n section and as a result this also allows generating proper i18n attributes sections instead of keeping these attribute in plain form (with their values) in attribute arrays.
PR Close#36422
When the compiler needs to convert a type reference to a value
expression, it may encounter a type that refers to a namespaced symbol.
Such namespaces need to be handled specially as there's various forms
available. Consider a namespace named "ns":
1. One can refer to a namespace by itself: `ns`. A namespace is only
allowed to be used in a type position if it has been merged with a
class, but even if this is the case it may not be possible to convert
that type into a value expression depending on the import form. More
on this later (case a below)
2. One can refer to a type within the namespace: `ns.Foo`. An import
needs to be generated to `ns`, from which the `Foo` property can then
be read.
3. One can refer to a type in a nested namespace within `ns`:
`ns.Foo.Bar` and possibly even deeper nested. The value
representation is similar to case 2, but includes additional property
accesses.
The exact strategy of how to deal with these cases depends on the type
of import used. There's two flavors available:
a. A namespaced import like `import * as ns from 'ns';` that creates
a local namespace that is irrelevant to the import that needs to be
generated (as said import would be used instead of the original
import).
If the local namespace "ns" itself is referred to in a type position,
it is invalid to convert it into a value expression. Some JavaScript
libraries publish a value as default export using `export = MyClass;`
syntax, however it is illegal to refer to that value using "ns".
Consequently, such usage in a type position *must* be accompanied by
an `@Inject` decorator to provide an explicit token.
b. An explicit namespace declaration within a module, that can be
imported using a named import like `import {ns} from 'ns';` where the
"ns" module declares a namespace using `declare namespace ns {}`.
In this case, it's the namespace itself that needs to be imported,
after which any qualified references into the namespace are converted
into property accesses.
Before this change, support for namespaces in the type-to-value
conversion was limited and only worked correctly for a single qualified
name using a namespace import (case 2a). All other cases were either
producing incorrect code or would crash the compiler (case 1a).
Crashing the compiler is not desirable as it does not indicate where
the issue is. Moreover, the result of a type-to-value conversion is
irrelevant when an explicit injection token is provided using `@Inject`,
so referring to a namespace in a type position (case 1) could still be
valid.
This commit introduces logic to the type-to-value conversion to be able
to properly deal with all type references to namespaced symbols.
Fixes#36006
Resolves FW-1995
PR Close#36106
1. update jasmine to 3.5
2. update @types/jasmine to 3.5
3. update @types/jasminewd2 to 2.0.8
Also fix several cases, the new jasmine 3 will help to create test cases correctly,
such as in the `jasmine 2.x` version, the following case will pass
```
expect(1 == 2);
```
But in jsamine 3, the case will need to be
```
expect(1 == 2).toBeTrue();
```
PR Close#34625
In Ivy, Angular decorators are compiled into static fields that are
inserted into a class declaration in a TypeScript transform. When
targeting Closure compiler such fields need to be annotated with
`@nocollapse` to prevent them from being lifted from a static field into
a variable, as that would prevent the Ivy runtime from being able to
find the compiled definitions.
Previously, there was a bug in TypeScript where synthetic comments added
in a transform would not be emitted at all, so as a workaround a global
regex-replace was done in the emit's `writeFile` callback that would add
the `@nocollapse` annotation to all static Ivy definition fields. This
approach is no longer possible when ngtsc is running as TypeScript
plugin, as a plugin cannot control emit behavior.
The workaround is no longer necessary, as synthetic comments are now
properly emitted, likely as of
https://github.com/microsoft/TypeScript/pull/22141 which has been
released with TypeScript 2.8.
This change is required for running ngtsc as TypeScript plugin in
Bazel's `ts_library` rule, to move away from the custom `ngc_wrapped`
approach.
Resolves FW-1952
PR Close#35932
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
PR Close#35975
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Prior to this commit, while calculating the scope for a module, Ivy compiler processed `declarations` field first and `imports` after that. That results in a couple issues:
* for Pipes with the same `name` and present in `declarations` and in an imported module, Pipe from imported module was selected. In View Engine the logic is opposite: Pipes from `declarations` field receive higher priority.
* for Directives with the same selector and present in `declarations` and in an imported module, we first invoked the logic of a Directive from `declarations` field and after that - imported Directive logic. In View Engine, it was the opposite and the logic of a Directive from the `declarations` field was invoked last.
In order to align Ivy and View Engine behavior, this commit updates the logic in which we populate module scope: we first process all imports and after that handle `declarations` field. As a result, in Ivy both use-cases listed above work similar to View Engine.
Resolves#35502.
PR Close#35850
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
It's an error to declare a variable twice on a specific template:
```html
<div *ngFor="let i of items; let i = index">
</div>
```
This commit introduces a template type-checking error which helps to detect
and diagnose this problem.
Fixes#35186
PR Close#35674
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
When the `NgIf` directive is used in a template, its context variables
can be used to capture the bound value. This is typically used together
with a pipe or function call, where the resulting value is captured in a
context variable. There's two syntax forms available:
1. Binding to `NgIfContext.ngIf` using the `as` syntax:
```html
<span *ngIf="(user$ | async) as user">{{user.name}}</span>
```
2. Binding to `NgIfContext.$implicit` using the `let` syntax:
```html
<span *ngIf="user$ | async; let user">{{user.name}}</span>
```
Because of the semantics of `ngIf`, it is known that the captured
context variable is non-nullable, however the template type checker
would not consider them as such and still report errors when
`strictNullTypes` is enabled.
This commit updates `NgIf`'s context guard to make the types of the
context variables non-nullable, avoiding the issue.
Fixes#34572
PR Close#35125
For view and content queries, the Ivy compiler attempts to statically
evaluate the predicate token so that string predicates containing
comma-separated reference names can be split into an array of strings
during compilation. When the predicate is a dynamic value that cannot be
statically interpreted at compile time, the compiler would previously
produce an error. This behavior breaks a use-case where an `InjectionToken`
is being used as query predicate, as the usage of the `new` keyword
prevents such predicates from being statically evaluated.
This commit changes the behavior to no longer produce an error for
dynamic values. Instead, the expression is emitted as is into the
generated code, postponing the evaluation to happen at runtime.
Fixes#34267
Resolves FW-1828
PR Close#35307
It's possible to pass a directive as an input to itself. Consider:
```html
<some-cmp #ref [value]="ref">
```
Since the template type-checker attempts to infer a type for `<some-cmp>`
using the values of its inputs, this creates a circular reference where the
type of the `value` input is used in its own inference:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: _t0});
```
Obviously, this doesn't work. To resolve this, the template type-checker
used to generate a `null!` expression when a reference would otherwise be
circular:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: null!});
```
This effectively asks TypeScript to infer a value for this context, and
works well to resolve this simple cycle. However, if the template
instead tries to use the circular value in a larger expression:
```html
<some-cmp #ref [value]="ref.prop">
```
The checker would generate:
```typescript
var _t0 = SomeCmp.ngTypeCtor({value: (null!).prop});
```
In this case, TypeScript can't figure out any way `null!` could have a
`prop` key, and so it infers `never` as the type. `(never).prop` is thus a
type error.
This commit implements a better fallback pattern for circular references to
directive types like this. Instead of generating a `null!` in place for the
reference, a type is inferred by calling the type constructor again with
`null!` as its input. This infers the widest possible type for the directive
which is then used to break the cycle:
```typescript
var _t0 = SomeCmp.ngTypeCtor(null!);
var _t1 = SomeCmp.ngTypeCtor({value: _t0.prop});
```
This has the desired effect of validating that `.prop` is legal for the
directive type (the type of `#ref`) while also avoiding a cycle.
Fixes#35372Fixes#35603Fixes#35522
PR Close#35622
NG6002/NG6003 are errors produced when an NgModule being compiled has an
imported or exported type which does not have the proper metadata (that is,
it doesn't appear to be an @NgModule, or @Directive, etc. depending on
context).
Previously this error message was a bit sparse. However, Github issues show
that this is the most common error users receive when for whatever reason
ngcc wasn't able to handle one of their libraries, or they just didn't run
it. So this commit changes the error message to offer a bit more useful
context, instructing users differently depending on whether the class in
question is from their own project, from NPM, or from a monorepo-style local
dependency.
PR Close#35620
In #33705 we made it so that we generate pure functions for object/array literals in order to avoid having them be shared across elements/views. The problem this introduced is that further down the line the `ContantPool` uses the generated literal in order to figure out whether to share an existing factory or to create a new one. `ConstantPool` determines whether to share a factory by creating a key from the AST node and using it to look it up in the factory cache, however the key generation function didn't handle function invocations and replaced them with `null`. This means that the key for `{foo: pureFunction0(...)}` and `{foo: null}` are the same.
These changes rework the logic so that instead of generating a `null` key
for function invocations, we generate a variable called `<unknown>` which
shouldn't be able to collide with anything.
Fixes#35298.
PR Close#35481
Currently Ivy always generates the `$event` function argument, even if it isn't being used by the listener expressions. This can lead to unnecessary bytes being generated, because optimizers won't remove unused arguments by default. These changes add some logic to avoid adding the argument when it isn't required.
PR Close#35097
Prior to this commit, decorator handling logic in Ngtsc used `Error` to throw errors. This commit replaces most of these instances with `FatalDiagnosticError` class, which provider a better diagnostics error (including location of the problematic code).
PR Close#35244
In Ivy's template type checker, event bindings are checked in a closure
to allow for accurate type inference of the `$event` parameter. Because
of the closure, any narrowing effects of template guards will no longer
be in effect when checking the event binding, as TypeScript assumes that
the guard outside of the closure may no longer be true once the closure
is invoked. For more information on TypeScript's Control Flow Analysis,
please refer to https://github.com/microsoft/TypeScript/issues/9998.
In Angular templates, it is known that an event binding can only be
executed when the view it occurs in is currently rendered, hence the
corresponding template guard is known to hold during the invocation of
an event handler closure. As such, it is desirable that any narrowing
effects from template guards are still in effect within the event
handler closure.
This commit tweaks the generated Type-Check Block (TCB) to repeat all
template guards within an event handler closure. This achieves the
narrowing effect of the guards even within the closure.
Fixes#35073
PR Close#35193
A bug previously caused the template type-checking diagnostics produced by
TypeScript for template expressions to use -99-prefixed error codes. These
codes are converted to "NG" errors instead of "TS" errors during diagnostic
printing. This commit fixes the issue.
PR Close#35146
In #33551, a bug in `ngc --watch` mode was fixed so that a component is
recompiled when its template file is changed. Due to insufficient
normalization of files paths, this fix did not have the desired effect
on Windows.
Fixes#32869
PR Close#34015
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
Component's decorator handler exposes `preanalyze` method to preload async resources (templates, stylesheets). The logic in preanalysis phase may throw `FatalDiagnosticError` errors that contain useful information regarding the origin of the problem. However these errors from preanalysis phase were not intercepted in TraitCompiler, resulting in just error message text be displayed. This commit updates the logic to handle FatalDiagnosticError and transform it before throwing, so that the result diagnostic errors contain the necessary info.
PR Close#34801
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
Previously, NgtscProgram lived in the main @angular/compiler-cli package
alongside the legacy View Engine compiler. As a result, the main package
depended on all of the ngtsc internal packages, and a significant portion of
ngtsc logic lived in NgtscProgram.
This commit refactors NgtscProgram and moves the main logic of compilation
into a new 'core' package. The new package defines a new API which enables
implementers of TypeScript compilers (compilers built using the TS API) to
support Angular transpilation as well. It involves a new NgCompiler type
which takes a ts.Program and performs Angular analysis and transformations,
as well as an NgCompilerHost which wraps an input ts.CompilerHost and adds
any extra Angular files.
Together, these two classes are used to implement a new NgtscProgram which
adapts the legacy api.Program interface used by the View Engine compiler
onto operations on the new types. The new NgtscProgram implementation is
significantly smaller and easier to reason about.
The new NgCompilerHost replaces the previous GeneratedShimsHostWrapper which
lived in the 'shims' package.
A new 'resource' package is added to support the HostResourceLoader which
previously lived in the outer compiler package.
As a result of the refactoring, the dependencies of the outer
@angular/compiler-cli package on ngtsc internal packages are significantly
trimmed.
This refactoring was driven by the desire to build a plugin interface to the
compiler so that tsc_wrapped (another consumer of the TS compiler APIs) can
perform Angular transpilation on user request.
PR Close#34887
This commit fixes a bug in the incremental rebuild engine of ngtsc, where if
a component was removed from its NgModule, it would not be properly
re-emitted.
The bug stemmed from the fact that whether to emit a file was a decision
based purely on the updated dependency graph, which captures the dependency
structure of the rebuild program. This graph has no edge from the component
to its former module (as it was removed, of course), so the compiler
erroneously decides not to emit the component.
The bug here is that the compiler does know, from the previous dependency
graph, that the component file has logically changed, since its previous
dependency (the module file) has changed. This information was not carried
forward into the set of files which need to be emitted, because it was
assumed that the updated dependency graph was a more accurate source of that
information.
With this commit, the set of files which need emit is pre-populated with the
set of logically changed files, to cover edge cases like this.
Fixes#34813
PR Close#34912
Previously, the template type-checker would always construct a generic
template context type with correct bounds, even when strictTemplates was
disabled. This meant that type-checking of expressions involving that type
was stricter than View Engine.
This commit introduces a 'strictContextGenerics' flag which behaves
similarly to other 'strictTemplates' flags, and switches the inference of
generic type parameters on the component context based on the value of this
flag.
PR Close#34649
FileToModuleHost aliasing supports compilation within environments that have
two properties:
1. A `FileToModuleHost` exists which defines canonical module names for any
given TS file.
2. Dependency restrictions exist which prevent the import of arbitrary files
even if such files are within the .d.ts transitive closure of a
compilation ("strictdeps").
In such an environment, generated imports can only go through import paths
which are already present in the user program. The aliasing system supports
the generation and consumption of such imports at runtime.
`FileToModuleHost` aliasing does not emit re-exports in .d.ts files. This
means that it's safe to rely on alias re-exports in generated .js code (they
are guaranteed to exist at runtime) but not in template type-checking code
(since TS will not be able to follow such imports). Therefore, non-aliased
imports should be used in template type-checking code.
This commit adds a `NoAliasing` flag to `ImportFlags` and sets it when
generating imports in template type-checking code. The testing environment
is also patched to support resolution of FileToModuleHost canonical paths
within the template type-checking program, enabling testing of this change.
PR Close#34649
It's possible to declare multiple inputs for a directive/component which all
map to the same property name. This is usually done in error, as only one of
any bindings to the property will "win".
In the template type-checker, an error was previously being raised as a
result of this ambiguity. Specifically, a type constructor was produced
which required a binding for each field, but only one of the fields had
a value via the binding. TypeScript would (rightfully) error on missing
values for the remaining fields. This ultimately was happening when the
code which generated the default values for "unset" inputs belonging to
directives or pipes used the final mapping from properties to fields as
a source for field names.
Instead, this commit uses the original list of fields to generate unset
input values, which correctly provides values for fields which shared a
property name but didn't receive the final binding.
PR Close#34649
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
Pipes in host binding expressions are not supported in View Engine and Ivy, but in some more complex cases (like `(value | pipe) === true`) compiler was not reporting errors. This commit extends Ivy logic to detect pipes in host binding expressions and throw in cases bindings are present. View Engine behavior remains the same.
PR Close#34655
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
Previously, it was required that both `fullTemplateTypeCheck` and
`strictTemplates` had to be enabled for strict mode to be enabled. This
is strange, as `strictTemplates` implies `fullTemplateTypeCheck`. This
commit makes setting the `fullTemplateTypeCheck` flag optional so that
strict mode can be enabled by just setting `strictTemplates`.
PR Close#34195
It is now an error if '"fullTemplateTypeCheck"' is disabled while
`"strictTemplates"` is enabled, as enabling the latter implies that the
former is also enabled.
PR Close#34195
The compiler has a translation mechanism to convert from an Angular
`Type` to a `ts.TypeNode`, as appropriate. Prior to this change, it
would translate certain Angular expressions into their value equivalent
in TypeScript, instead of the correct type equivalent. This was possible
as the `ExpressionVisitor` interface is not strictly typed, with `any`s
being used for return values.
For example, a literal object was translated into a
`ts.ObjectLiteralExpression`, containing `ts.PropertyAssignment` nodes
as its entries. This has worked without issues as their printed
representation is identical, however it was incorrect from a semantic
point of view. Instead, a `ts.TypeLiteralNode` is created with
`ts.PropertySignature` as its members, which corresponds with the type
declaration of an object literal.
PR Close#34021
Angular View Engine uses global knowledge to compile the following code:
```typescript
export class Base {
constructor(private vcr: ViewContainerRef) {}
}
@Directive({...})
export class Dir extends Base {
// constructor inherited from base
}
```
Here, `Dir` extends `Base` and inherits its constructor. To create a `Dir`
the arguments to this inherited constructor must be obtained via dependency
injection. View Engine is able to generate a correct factory for `Dir` to do
this because via metadata it knows the arguments of `Base`'s constructor,
even if `Base` is declared in a different library.
In Ivy, DI is entirely a runtime concept. Currently `Dir` is compiled with
an ngDirectiveDef field that delegates its factory to `getInheritedFactory`.
This looks for some kind of factory function on `Base`, which comes up
empty. This case looks identical to an inheritance chain with no
constructors, which works today in Ivy.
Both of these cases will now become an error in this commit. If a decorated
class inherits from an undecorated base class, a diagnostic is produced
informing the user of the need to either explicitly declare a constructor or
to decorate the base class.
PR Close#34460
Adds a compilation error if the consumer tries to pass in an undecorated class into the `providers` of an `NgModule`, or the `providers`/`viewProviders` arrays of a `Directive`/`Component`.
PR Close#34460
Previously, ngtsc would perform scope analysis (which directives/pipes are
available inside a component's template) and template type-checking of that
template as separate steps. If a component's scope was somehow invalid (e.g.
its NgModule imported something which wasn't another NgModule), the
component was treated as not having a scope. This meant that during template
type-checking, errors would be produced for any invalid expressions/usage of
other components that should have been in the scope.
This commit changes ngtsc to skip template type-checking of a component if
its scope is erroneous (as opposed to not present in the first place). Thus,
users aren't overwhelmed with diagnostic errors for the template and are
only informed of the root cause of the problem: an invalid NgModule scope.
Fixes#33849
PR Close#34460
This commit adds three previously missing validations to
NgModule.declarations:
1. It checks that declared classes are actually within the current
compilation.
2. It checks that declared classes are directives, components, or pipes.
3. It checks that classes are declared in at most one NgModule.
PR Close#34404
In Ivy it's illegal for a template to write to a template variable. So the
template:
```html
<ng-template let-somevar>
<button (click)="somevar = 3">Set var to 3</button>
</ng-template>
```
is erroneous and previously would fail to compile with an assertion error
from the `TemplateDefinitionBuilder`. This error wasn't particularly user-
friendly, though, as it lacked the context of which template or where the
error occurred.
In this commit, a new check in template type-checking is added which detects
such erroneous writes and produces a true diagnostic with the appropriate
context information.
Closes#33674
PR Close#34339
Previously, the compiler performed an incremental build by analyzing and
resolving all classes in the program (even unchanged ones) and then using
the dependency graph information to determine which .js files were stale and
needed to be re-emitted. This algorithm produced "correct" rebuilds, but the
cost of re-analyzing the entire program turned out to be higher than
anticipated, especially for component-heavy compilations.
To achieve performant rebuilds, it is necessary to reuse previous analysis
results if possible. Doing this safely requires knowing when prior work is
viable and when it is stale and needs to be re-done.
The new algorithm implemented by this commit is such:
1) Each incremental build starts with knowledge of the last known good
dependency graph and analysis results from the last successful build,
plus of course information about the set of files changed.
2) The previous dependency graph's information is used to determine the
set of source files which have "logically" changed. A source file is
considered logically changed if it or any of its dependencies have
physically changed (on disk) since the last successful compilation. Any
logically unchanged dependencies have their dependency information copied
over to the new dependency graph.
3) During the `TraitCompiler`'s loop to consider all source files in the
program, if a source file is logically unchanged then its previous
analyses are "adopted" (and their 'register' steps are run). If the file
is logically changed, then it is re-analyzed as usual.
4) Then, incremental build proceeds as before, with the new dependency graph
being used to determine the set of files which require re-emitting.
This analysis reuse avoids template parsing operations in many circumstances
and significantly reduces the time it takes ngtsc to rebuild a large
application.
Future work will increase performance even more, by tackling a variety of
other opportunities to reuse or avoid work.
PR Close#34288
The `ModuleWithProviders` type has an optional type parameter that
should be specified to indicate what NgModule class will be provided.
This enables the Ivy compiler to statically determine the NgModule type
from the declaration files. This type parameter will become required in
the future, however to aid in the migration the compiler will detect
code patterns where using `ModuleWithProviders` as return type is
appropriate, in which case it transforms the emitted .d.ts files to
include the generic type argument.
This should reduce the number of occurrences where `ModuleWithProviders`
is referenced without its generic type argument.
Resolves FW-389
PR Close#34235
The metadata collector for View Engine compilations emits error symbols
for static class members that have not been initialized, which prevents
a library from building successfully when `strictMetadataEmit` is
enabled, which is recommended for libraries to avoid issues in library
consumers. This is troublesome for libraries that are adopting static
members for the Ivy template type checker: these members don't need a
value assignment as only their type is of importance, however this
causes metadata errors. As such, a library used to be required to
initialize the special static members to workaround this error,
undesirably introducing a code-size overhead in terms of emitted
JavaScript code.
This commit modifies the collector logic to specifically ignore
the special static members for Ivy's template type checker, preventing
any errors from being recorded during the metadata collection.
PR Close#34296
For Ivy's template type checker it is possible to let a directive
specify static members to allow a wider type for some input:
```typescript
export class MatSelect {
@Input() disabled: boolean;
static ngAcceptInputType_disabled: boolean | string;
}
```
This allows a binding to the `MatSelect.disabled` input to be of type
boolean or string, whereas the `disabled` property itself is only of
type boolean.
Up until now, any static `ngAcceptInputType_*` property was not
inherited for subclasses of a directive class. This is cumbersome, as
the directive's inputs are inherited, so any acceptance member should as
well. To resolve this limitation, this commit extends the flattening of
directive metadata to include the acceptance members.
Fixes#33830
Resolves FW-1759
PR Close#34296
The compiler exports a `formatDiagnostics` function which consumers can use
to print both ts and ng diagnostics. However, this function was previously
using the "old" style TypeScript diagnostics, as opposed to the modern
diagnostic printer which uses terminal colors and prints additional context
information.
This commit updates `formatDiagnostics` to use the modern formatter, plus to
update Ivy's negative error codes to Angular 'NG' errors.
The Angular CLI needs a little more work to use this function for printing
TS diagnostics, but this commit alone should fix Bazel builds as ngc-wrapped
goes through `formatDiagnostics`.
PR Close#34234
Previously, ternary expressions were emitted as:
condExpr ? trueCase : falseCase
However, this causes problems when ternary operations are nested. In
particular, a template expression of the form:
a?.b ? c : d
would have compiled to:
a == null ? null : a.b ? c : d
The ternary operator is right-associative, so that expression is interpreted
as:
a == null ? null : (a.b ? c : d)
when in reality left-associativity is desired in this particular instance:
(a == null ? null : a.b) ? c : d
This commit adds a check in the expression translator to detect such
left-associative usages of ternaries and to enforce such associativity with
parentheses when necessary.
A test is also added for the template type-checking expression translator,
to ensure it correctly produces right-associative expressions for ternaries
in the user's template.
Fixes#34087
PR Close#34221
Commit that updated i18n message ids rendering (e524322c43) also introduced a couple tests that relied on a previous version of `ngI18nClosureMode` flag format. The `ngI18nClosureMode` usage format was changed in the followup commit (c4ce24647b) and triggered a problem with the mentioned tests. This commit updates the tests to a new `ngI18nClosureMode` flag usage format.
PR Close#34224
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
This comment ensures that generated template code guards
this global check.
PR Close#34211
This is a follow-up to #33997 where some new generic parameters were added without defaults which is technically a breaking change. These changes add the defaults.
PR Close#34206
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Fixes ngtsc incorrectly logging an unknown element diagnostic for HTML elements that are inside an SVG `foreignObject` with the `xhtml` namespace.
Fixes#34171.
PR Close#34178
Now that `@angular/localize` can interpret multiple legacy message ids in the
metablock of a `$localize` tagged template string, this commit adds those
ids to each i18n message extracted from component templates, but only if
the `enableI18nLegacyMessageIdFormat` is not `false`.
PR Close#34135
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
Prior to this commit, the unknown element can happen twice for AOT-compiled components: once during compilation and once again at runtime. Due to the fact that `schemas` information is not present on Component and NgModule defs after AOT compilation, the second check (at runtime) may fail, even though the same check was successful at compile time. This commit updates the code to avoid the second check for AOT-compiled components by checking whether `schemas` information is present in a logic that executes the unknown element check.
PR Close#34024
When creating synthesized tagged template literals, one must provide both
the "cooked" text and the "raw" (unparsed) text. Previously there were no
good APIs for creating the AST nodes with raw text for such literals.
Recently the APIs were improved to support this, and they do an extra
check to ensure that the raw text parses to be equal to the cooked text.
It turns out there is a bug in this check -
see https://github.com/microsoft/TypeScript/issues/35374.
This commit works around the bug by synthesizing a "head" node and morphing
it by changing its `kind` into the required node type.
// FW-1747
PR Close#34065
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Prior to this commit, all styles extracted from Component's template (defined using <style> tags) were ignored by JIT compiler, so only `styles` array values defined in @Component decorator were used. This change updates JIT compiler to take styles extracted from the template into account. It also ensures correct order where `styles` array values are applied first and template styles are applied second.
PR Close#34017
In ViewEngine we were only generating code for exported classes, however with Ivy we do it no matter whether the class has been exported or not. These changes add an extra flag that allows consumers to opt into the ViewEngine behavior. The flag works by treating non-exported classes as if they're set to `jit: true`.
Fixes#33724.
PR Close#33921
Previously, our incremental build system kept track of the changes between
the current compilation and the previous one, and used its knowledge of
inter-file dependencies to evaluate the impact of each change and emit the
right set of output files.
However, a problem arose if the compiler was not able to extract a
dependency graph successfully. This typically happens if the input program
contains errors. In this case the Angular analysis part of compilation is
never executed.
If a file changed in one of these failed builds, in the next build it
appears unchanged. This means that the compiler "forgets" to emit it!
To fix this problem, the compiler needs to know the set of changes made
_since the last successful build_, not simply since the last invocation.
This commit changes the incremental state system to much more explicitly
pass information from the previous to the next compilation, and in the
process to keep track of changes across multiple failed builds, until the
program can be analyzed successfully and the results of those changes
incorporated into the emit plan.
Fixes#32214
PR Close#33971
Due to the fact that Tsickle runs between analyze and transform phases in Angular, Tsickle may transform nodes (add comments with type annotations for Closure) that we captured during the analyze phase. As a result, some patterns where a function is returned from another function may trigger automatic semicolon insertion, which breaks the code (makes functions return `undefined` instead of a function). In order to avoid the problem, this commit updates the code to wrap all functions in some expression ("privders" and "viewProviders") in parentheses. More info can be found in Tsickle source code here: d797426257/src/jsdoc_transformer.ts (L1021)
PR Close#33609
The template type checker generates code to check directive inputs and
outputs, whose name may contain characters that can not be used as
identifier in TypeScript. Prior to this change, such names would be
emitted into the generated code as is, resulting in invalid code and
unexpected template type check errors.
This commit fixes the bug by representing the potentially invalid names
as string literal instead of raw identifier.
Fixes#33590
PR Close#33741
This commit transforms the setClassMetadata calls generated by ngtsc from:
```typescript
/*@__PURE__*/ setClassMetadata(...);
```
to:
```typescript
/*@__PURE__*/ (function() {
setClassMetadata(...);
})();
```
Without the IIFE, terser won't remove these function calls because the
function calls have arguments that themselves are function calls or other
impure expressions. In order to make the whole block be DCE-ed by terser,
we wrap it into IIFE and mark the IIFE as pure.
It should be noted that this change doesn't have any impact on CLI* with
build-optimizer, which removes the whole setClassMetadata block within
the webpack loader, so terser or webpack itself don't get to see it at
all. This is done to prevent cross-chunk retention issues caused by
webpack's internal module registry.
* actually we do expect a short-term size regression while
https://github.com/angular/angular-cli/pull/16228
is merged and released in the next rc of the CLI. But long term this
change does nothing to CLI + build-optimizer configuration and is done
primarly to correct the seemingly correct but non-function PURE annotation
that builds not using build-optimizer could rely on.
PR Close#33337
NgModules in Ivy have a definition which contains various different bits
of metadata about the module. In particular, this metadata falls into two
categories:
* metadata required to use the module at runtime (for bootstrapping, etc)
in AOT-only applications.
* metadata required to depend on the module from a JIT-compiled app.
The latter metadata consists of the module's declarations, imports, and
exports. To support JIT usage, this metadata must be included in the
generated code, especially if that code is shipped to NPM. However, because
this metadata preserves the entire NgModule graph (references to all
directives and components in the app), it needs to be removed during
optimization for AOT-only builds.
Previously, this was done with a clever design:
1. The extra metadata was added by a function called `setNgModuleScope`.
A call to this function was generated after each NgModule.
2. This function call was marked as "pure" with a comment and used
`noSideEffects` internally, which causes optimizers to remove it.
The effect was that in dev mode or test mode (which use JIT), no optimizer
runs and the full NgModule metadata was available at runtime. But in
production (presumably AOT) builds, the optimizer runs and removes the JIT-
specific metadata.
However, there are cases where apps that want to use JIT in production, and
still make an optimized build. In this case, the JIT-specific metadata would
be erroneously removed. This commit solves that problem by adding an
`ngJitMode` global variable which guards all `setNgModuleScope` calls. An
optimizer can be configured to statically define this global to be `false`
for AOT-only builds, causing the extra metadata to be stripped.
A configuration for Terser used by the CLI is provided in `tooling.ts` which
sets `ngJitMode` to `false` when building AOT apps.
PR Close#33671
The Ivy template type-checker is capable of inferring the type of a
structural directive (such as NgForOf<T>). Previously, this was done with
fullTemplateTypeCheck: true, even if strictTemplates was false. View Engine
previously did not do this inference, and so this causes breakages if the
type of the template context is not what the user expected.
In particular, consider the template:
```html
<div *ngFor="let user of users as all">
{{user.index}} out of {{all.length}}
</div>
```
As long as `users` is an array, this seems reasonable, because it appears
that `all` is an alias for the `users` array. However, this is misleading.
In reality, `NgForOf` is rendered with a template context that contains
both a `$implicit` value (for the loop variable `user`) as well as a
`ngForOf` value, which is the actual value assigned to `all`. The type of
`NgForOf`'s template context is `NgForContext<T>`, which declares `ngForOf`'s
type to be `NgIterable<T>`, which does not have a `length` property (due to
its incorporation of the `Iterable` type).
This commit stops the template type-checker from inferring template context
types unless strictTemplates is set (and strictInputTypes is not disabled).
Fixes#33527.
PR Close#33537
Previously, the ngtsc compiler attempted to reuse analysis work from the
previous program during an incremental build. To do this, it had to prove
that the work was safe to reuse - that no changes made to the new program
would invalidate the previous analysis.
The implementation of this had a significant design flaw: if the previous
program had errors, the previous analysis would be missing significant
information, and the dependency graph extracted from it would not be
sufficient to determine which files should be re-analyzed to fill in the
gaps. This often meant that the build output after an error was resolved
would be wholly incorrect.
This commit switches ngtsc to take a simpler approach to incremental
rebuilds. Instead of attempting to reuse prior analysis work, the entire
program is re-analyzed with each compilation. This is actually not as
expensive as one might imagine - analysis is a fairly small part of overall
compilation time.
Based on the dependency graph extracted during this analysis, the compiler
then can make accurate decisions on whether to emit specific files. A new
suite of tests is added to validate behavior in the presence of source code
level errors.
This new approach is dramatically simpler than the previous algorithm, and
should always produce correct results for a semantically correct program.s
Fixes#32388Fixes#32214
PR Close#33862
Originally, QueryList implemented Iterable and provided a Symbol.iterator
on its prototype. This caused issues with tree-shaking, so QueryList was
refactored and the Symbol.iterator added in its constructor instead. As
part of this change, QueryList no longer implemented Iterable directly.
Unfortunately, this meant that QueryList was no longer assignable to
Iterable or, consequently, NgIterable. NgIterable is used for NgFor's input,
so this meant that QueryList was not usable (in a type sense) for NgFor
iteration. View Engine's template type checking would not catch this, but
Ivy's did.
As a fix, this commit adds the declaration (but not the implementation) of
the Symbol.iterator function back to QueryList. This has no runtime effect,
so it doesn't affect tree-shaking of QueryList, but it ensures that
QueryList is assignable to NgIterable and thus usable with NgFor.
Fixes#29842
PR Close#33536
Previously, the compiler assumed that all TS files logically within a
project existed under one or more "root directories". If the TS compiler
option `rootDir` or `rootDirs` was set, they would dictate the root
directories in use, otherwise the current directory was used.
Unfortunately this assumption was unfounded - it's common for projects
without explicit `rootDirs` to import from files outside the current
working directory. In such cases the `LogicalProjectStrategy` would attempt
to generate imports into those files, and fail. This would lead to no
`ReferenceEmitStrategy` being able to generate an import, and end in a
compiler assertion failure.
This commit introduces a new strategy to use when there are no `rootDirs`
explicitly present, the `RelativePathStrategy`. It uses simpler, filesystem-
relative paths to generate imports, even to files above the current working
directory.
Fixes#33659Fixes#33562
PR Close#33828
This commit adds the ability to change directories using the compiler's
internal filesystem abstraction. This is a prerequisite for writing tests
which are sensitive to the current working directory.
In addition to supporting the `chdir()` operation, this commit also fixes
`getDefaultLibLocation()` for mock filesystems to not assume `node_modules`
is in the current directory, but to resolve it similarly to how Node does
by progressively looking higher in the directory tree.
PR Close#33828
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
Since i18n messages are mapped to `$localize` tagged template strings,
the "raw" version must be properly escaped. Otherwise TS will throw an
error such as:
```
Error: Debug Failure. False expression: Expected argument 'text' to be the normalized (i.e. 'cooked') version of argument 'rawText'.
```
This commit ensures that we properly escape these raw strings before creating
TS AST nodes from them.
PR Close#33820
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
