The trailing error message comes from tracing the chain of DymaicValue which leads to a mostly useless error that highlights the same symbol as the original message and emits the error message "Unknown reference". This error message is removed in the favour of the original message which suffices.
PR Close#54230
A single error code is created to unify the common error pattern in local compilation mode where an imported const cannot be resolved, but needs to be resolved. This mainly happens for Angular decorator fields such as @Component.template.
The error messages are also upgraded to be more centered around this unifying theme.
PR Close#54230
Currently, when two components are named `TestComponent`, and both would
use e.g. control flow. Templates would be generated by the compiler and
those would conflict at runtime because the names for the template
functions are not ensured to be unique.
This seems like a more general problem that could be tackled in the
future in the template pipeline by always using the `ConstantPool`, but
for now, we should be good already, given us ensuring the `baseName`'s are
always unique.
PR Close#54273
The `read` option for queries can rely on lexical variables inside the
class. These constructs are fine from a technical perspective in
TypeScript, but in practice, when the component/directive definition is
being created, the read value is extracted into the definition,
**outside** of the class. This breaks `this` references.
To fix this, we are restricting the `read` option to literal values.
Similar to `descendants`. Literal references are in practice constructs
like:
- `read: bla.X`
- `read: X`
where `bla` or `X` is never a `ThisKeywoord`- hence fixing the issue
and also simplifying the patterns for easier single file compilation.
PR Close#54257
This commit adds a JIT transform for signal-based queries, so that
queries are working as expected in JIT environments like `ng test` where
decorator metadata is needed as a prerequisite for the component
definition creation.
This is similar to the JIT transforms for signal inputs etc.
PR Close#54257
Adds an ngtsc diagnostic and compilation output test for `output()`. The
test will verify certain recognition restrictions and ensures that
diagnostics are raised, in addition to proper full compilation output
being generated (aside from the compliance tests verifying output more
closely).
PR Close#54217
Adds compliance output tests for `output()` to verify that
we are emitting proper full compilation output, as well as proper
partial compilation output that can be linked to match the full output.
PR Close#54217
The deps tracker which is responsible to track orphan components does not work for classes mutated by custom decorator. Some work needed to make this happen (tracked in b/320536434). As a result, with option `forbidOrphanComponents` being true the deps tracker will falsely report any component as orphan if it or its NgModule have custom/duplicate decorators. So it is unsafe to use this option in the presence of custom/duplicate decorator and we disable it until it is made compatible. Note that applying custom/duplicate decorators to `@Injectable` classes is ok since these classes never make it into the deps tracker. So we excempt them.
PR Close#54139
Custom/duplicate decorators break the deps tracker in local mode. But deps tracker only deals with non-injectable classes. So applying custom/duplicate decorators to `@Injectable` only classes does not disturb deps tracker and local compilation in general. There are also ~ 100 such cases in g3 which cannot be cleaned up.
PR Close#54139
For cases like this:
```
@Component({...})
@Component({...})
export class SomeComp {
}
```
The `DecoratorHandler.detect` apparantly matches only one of the `@Component` decorator, leaving the other undetected which will be transformed by TS decorator helper and that breaks local compilation runtimes. But the error message only mentioned "custom" decorator, while in this case it is a "duplicate Angular" decorator. The respective error message is updated thus.
PR Close#54139
Instead of maintaining individual transforms for `input`, `output`,
`model` etc. we are grouping them directly and the first one matching,
will execute.
This reduces needed traversal through AST and also makes it a little
more clean to write new initializer API metadata transforms.
Note: The Angular JIT transform is now also moving from `tooling.ts`
directly into `/transformers` for more local placement of transformer
logic.
PR Close#54200
Fixes that `@defer` blocks weren't recognizing default imports and generating the proper code for them. Default symbols need to be accessed through the `default` property in the `import` statement, rather than by their name.
PR Close#53695
In one of the earlier commits, the logic that appends `=$event` before parsing two-way bindings was removed and some validation was added to prevent unassignable expressions from being used. This ended up being problematic, because previously the parser was incorrectly allowing some invalid expressions which users came to depend on. For example, it transformed `[(value)]="a && a.b"` to `a && (a.b = $event)`.
These changes add some special cases for the common breakages that came up during the TGP.
PR Close#54154
Updates the template definition builder to emit the new format for the listener side of two-way bindings.
```js
// Before
listener("ngModelChange", function($event) {
return ctx.name = $event;
});
// After
ɵɵtwoWayListener("ngModelChange", function($event) {
ɵɵtwoWayBindingSet(ctx.name, $event) || (ctx.name = $event);
return $event;
});
```
PR Close#54154
Reworks the compiler so that it generates a `twoWayProperty` instruction, instead of `property`, for the property side of a two-way binding. Currently the new instruction passes through to `property`, but it'll have some two-way-binding-specific logic in subsequent PRs.
PR Close#54154
At the moment the extra import generation in local compilation mode fails if these extra imports produce a cycle. To handle this, the cycle handling strategy is updated for local compilation, and following the behaviour in the full compilation mode, the compiler does not generate extra import if it leads to cycle and instead leave things to the runtime.
PR Close#53543
With option `generateExtraImportsInLocalMode` set, in local mode the compiler generates extra imports for each component local dependencies. Here local dependencies means all component's dependencies within the same compilation unit.
To achieve this, the compiler performs a "local version" of its regular static analysis to find each component's deps, and these deps are used to generate extra side effect imports.
PR Close#53543
With option `generateExtraImportsInLocalMode` set in local compilation mode, the compiler generates extra side effect imports using this rule: any external module from which an identifier is imported into an NgModule will be added as side effect import to every file in the compilation unit. To illustrate this better assume the compilation unit has source files `a.ts` and `b.ts`, and:
```
// a.ts
import {SomeExternalStuff} from 'path/to/some_where';
import {SomeExternalStuff2} from 'path/to/some_where2';
...
@NgModule({imports: [SomeExternalStuff]})
```
then the extra import `import "path/to/some_where"` will be added to both `a.js` and `b.js`. Note that this is not the case for `import "path/to/some_where2"` though, since the symbol `SomeExternalStuff2` is not imported into any NgModule.
The math behind this mechanism is, in local compilation mode we cannot resolve component external dependencies fully. For example if a component in `a.ts` uses an external component defined in an external file `some_external_comp.ts` then we can generate the import to this file in `a.js`. Instead, we want to generate an import to a file that "gurantees" that `a.js` is placed after `some_external_comp.js` in the bundle. Now since the component in `some_external_comp.ts` is used in `a.ts`, then there must be a chain of imports starting from the NgModule that declares the component in `a.ts` to the component in `some_external_comp.ts`. This chain means some file in the same compilation unit as `a.ts` should import some external NgModule which includes `some_external_comp.ts` in its transitive closure and import it to some NgModule. So by adding this import to `a.js` we ensure that the bundling will have the right order.
PR Close#53543
At the moment local compilation mode does not support custom decorators, and it leads to unhandled errors. In this change a compile time diagnostic is produced in local mode for custom decorators. This is a temporary solution since there are few custom decorators are in use in g3. Custom decorators will be eventually supported in local mode.
PR Close#53983
This commit separates `InputSignal` for input signals with transforms.
The reason being that most of the time, signal inputs are not using
transforms and the generics are rather confusing.
Especially for users with inferred types displayed in their IDEs, the
input signal types are seemingly complex, even if no transform is used.
For this reason, we are introducing a new type called
`InputSignalWithTransform`. This type will be used for inputs with
transforms, while non-transform inputs just use `InputSignal`.
A notable fact is that `InputSignal` extends `InputSignalWithTransform`,
with the "identity transform". i.e. there is no transform. This allows
us to share the code for input signals. In practice, we don't expect
users to pass around `InputSignal`'s anyway.
PR Close#54053
Previously, defer deps fns names were only prefixed with the component name, meaning that distinct deps fns in the same component would produce a name collision. Now, we take into account the entire template function name when naming inner deps fns.
PR Close#54060
This commit introduces three additional diagnostics for queries:
- If a query (either using decorator or signal-based) is declared on a
static class member, a diagnostic is raised.
- If a signal-based query is mixed with a query decorator, a diagnostic
is raised. Similar to signal inputs.
- If a singal-based query is also declared in the directive/component
class decorator metadata, a diagnostic is raised.
PR Close#54019
Collapses multiple sibling query advance statements into single
query advance invocations. This will help reducing generated code
for directives/components with many queries.
PR Close#54019
Previously, if an ICU was inside a nested i18n root, it would use the nested root to calculate whether it should be applied. Now, we use the root i18n block.
PR Close#54026
This commit adds compliance tests to ensure that the generated output of
signal-based queries matches our expectation.
Note: collapsing query advance instructions is not implemented yet.
PR Close#53978
Adds a compiler integration test for recognizing signal-based queries,
and emitting the expected output. Concrete output will be verified via
the compliance tests.
PR Close#53978
This commit introduces the compiler output generation for signal-based
queries. Signal-based queries will have new creation-mode instructions
and update instructions to advance the current query indices in the
global shared context.
An output like the following is the expected output for signal-based
queries:
```
i0.ɵɵdefineComponent({
viewQuery: function App_Query(rf, ctx) {
if (rf & 1) {
i0.ɵɵviewQuery(ctx.d, _c0, 5);
i0.ɵɵviewQuerySignal(ctx.ds1, _c0, 5);
i0.ɵɵviewQuerySignal(ctx.ds2, _c0, 5);
}
if (rf & 2) {
let _t;
// only change-detected queries need explicit refresh
i0.ɵɵqueryRefresh(_t = i0.ɵɵloadQuery()) && (ctx.d = _t.first);
// we bump up current query index by 2 positions since there are 2 signal-based queries
i0.ɵɵqueryAdvance(2);
}
…
},
…
});
```
Note: For now, the collapsing of multiple advance instructions is not
implemented. This will be a follow-up.
Note 2: A couple of query helpers are now in their own file. This makes
it easier to focus on query-specific compiler code. The new function is
called `createQueryCreateCall`, which is a modified variant of the
existing function that previously only generated query parameters.
PR Close#53978
At the moment local compilation breaks for host directives because the current logic relies on global static analysis. This change creates a local version by cutting the diagnostics and copying the directive identifier as it is to the generated code without attempting to statically resolve it.
PR Close#53877
At the moment when unified host is selected (through option `_useHostForImportGeneration`) the compiler always generates alias reexports. Such reexports are mainly generated to satisfy strict dependency condition for generated files. Such condition is no longer the case for G3. At the same time, these alias reexports make it impossible to mix locally compiled targets with globally compiled targets. More precisely, a globally compiled target may not be able to consume a locally compiled target as its dependency since the former may import from the alias reexports which do not exist in the latter due to local compilation mode. So, to make global-local compilation interop possible, it is required to be able to turn off alias reexport generation.
PR Close#53937
This commit adds extra logic to produce a diagnostic in case `@Component.deferredImports` contain types from imports that also bring eager symbols. This would result in retaining a regular import and generating a dynamic import, which would not allow to defer-load dependencies.
PR Close#53899
Currently when the extended type check fails due to an import reference
that cannot be generated, the fatal diagnostic is not caught and
not properly exposed as a `ts.Diagnostic` that can be gracefully
handled. This is inconsistent to non-extended type checking diagnostics.
This is problematic because Angular CLI applications currently fail in
obscure ways because:
- the CLI does not expect `getDiagnosticsForFile` to actually throw
runtime errors.
- the CLI does not seem to properly print these errors given the
parallel workers and build excection, and those errors are
especially hard to debug because there is no `stack` for
`FatalDiagnosticError`'s.
Example: `MyDir` is not exported and the type check block cannot reference it.
PR Close#53896
This allows us to ensure signal inputs and a potential JIT transform
remain single file compilation compatible. The consequences are that
options need to be statically analyzable more strictly, compared to
loosened restrictions with static interpretation where e.g. `alias`
can be defined through a shared variable.
PR Close#53872
Currently when someone declares a signal or non-signal input on a static
class member, the compiler will not yield any diagnostic. We can detect
these mistakes and report a diagnostic to help our users.
PR Close#53808
This commit addds two diagnostics for two scenarios where signal inputs
are declared incorrectly:
- a signal input is also annotated with `@Input` in the TypeScript
sources.
- a signal input is also declared in the `inputs` option of
`@Directive/`@Component`.
PR Close#53808
This commit adds a transform for supporting input signals in JIT
environments. The transform will be wired up for Angular CLI
applications automatically. An integration test verifies that this fixes
unit testing with signal inputs.
The transform basically will take the signal input metadata and
transform it into `@Input` decorators that can provide static
information to the Angular JIT runtime when the directive/component
definition is compiled.
PR Close#53808
Adds signal input compliance tests, ensuring linking works as expected,
partial output is generated properly, types are inferred properly, and
that the full, or linked output matches our expected runtime structure.
PR Close#53808
This commit changes the `HasTransform` flag to be only concerned with
decorator inputs. This allows us to automatically detect signal input
transforms without reliance on the flag, resulting in less complexity in
the compiler (as outlined in the design doc) and various other places,
while it also allows us to simplify JIT support for signal inputs
because there would be no need to capture the "hasTransform" state in
the decorator so that JIT can generate the according input flags.
`isSignal` will still persist as an input flag to allow for monomorphic
and highly efficient distinguishing at runtime, whether an input is
signal based or not. JIT transform will also need to propagate this
information to the runtime somehow.
PR Close#53808
In some cases, the input files for a partial output generation
compliance tests may be invalid and lead to compilation errors.
The golden partial would be silently generated with the remaining
test cases. Instead of hiding errors, we will now print these and
cause the script to fail properly.
Note that the error logging is pretty minimalistic, but it's sufficient.
PR Close#53808
We generate `advance` instructions before most update instructions and the majority of `advance` calls are advancing by one. We can save some bytes for the most common case by omitting the parameter for `advance(1)` altogether.
PR Close#53845
Instead of computing the bit input flags at compile-time and inling
the final bit flag number, we will use the `InputFlags` enum directly.
This is a little more code in the compiler side, but will allow us to
have better debuggable development code, and also prevents problems
where runtime flag bitmasks differ from the compiler flag bitmasks.
This is in practice a noop for optimized applications as the enum values
would be inlined anyway. This matches existing compiler emit for e.g.
change detection strategy, or view encapsulation enums.
PR Close#53571
The linker compliance tests were disabled with a Babel update and
nobody realized for quite a while, via
https://github.com/angular/angular/pull/49914.
As we've came across this lost coverage, which also is quite
impactful as all libraries depend on linked output- I've took initiative
to debug the root cause as there was no follow-up.
https://github.com/angular/angular/issues/51647.
It turned out to be a highly complex issue that is non-trivial to fix,
but at least we should try to resurrect the significant portion of test
coverage by still running the linker tests- avoiding regressions, or
unexpected issues (like with defer being developed). We can work on
re-enabling and fixing source-maps separately.
Tracked via https://github.com/angular/angular/issues/51647.
PR Close#53571
The linker compliance tests did not run for a while. There were a couple
of new tests that were not passing as this wasn't flagged on CI. This commit fixes this.
Fortunately there was no problematic code that did indicate issues with linking.
In the follow-up commit, we fix the compliance test infrastructure to
re-enable linker testing..
One clear issue is still that the defer blocks are not handled properly
in linked output- hence making defer not actually "lazy" for compiled
libraries. This needs to be handled separately by the framework team.
PR Close#53571
This commit adds a final test for input signals, integrating all major
parts:
* type-checking
* compiler detection
* compiler emit
* API signature tests
PR Close#53571
This commit introduces a new enum for capturing additional metadata
about inputs. Called `InputFlags`. These will be built up at compile
time and then propagated into the runtime logic, in a way that does
not require additional lookup dictionaries data structures, or
additional memory allocations for "common inputs" that do not have any flags.
The flags will incorporate information on whether an input is signal
based. This can then be used to avoid megamorphic accesses when such
input is set- as we'd not need to check the input field value. This also
avoids cases where an input signal may be used as initial value for an
input (as we'd not incorrectly detect the input as a signal input then).
The new metadata emit will be useful for incorporating additional
metadata for inputs, such as whether they are required etc (although
required inputs are a build-time only construct right now- but this is a
good illustration of why input flags can be useful). An alternative
could have been to have an additional boolean entry for signal inputs,
but allocating a number with more flexible input flags seems more future
proof and more reasonable andreadable.
More information on the megamorphic access when updating an input
signal
https://docs.google.com/document/d/1FpnFruviKb6BFTQfMAP2AMEqEB0FI7z-3mT_qm7lzX8/edit.
PR Close#53571
In #52931, Kristiyan fixed a TemplateDefinitionBuilder bug in which derived alias variables in for loops (`$even`, `$first`, etc) were referring to the wrong level of nested `@for` block. (These variables are unique because they become inlined expressions, and are not "real" context variables.) He fixed this by appending level information to the generated alias name.
Template Pipeline actually suffered from the same bug. We fix it in a very similar way -- in particular, whenever these derived context variables are used, we make them depend on versions of `$index` and `$count` that have been suffixed with the xref of the enclosing repeater.
I have added a few more pipeline goldens, because we are not quite as clever as TDB about only generating the duplicate suffixed index and count variables when inside nested loops. This is fine, since in the long run, we want to refactor it more fundamentally.
I have also added a TODO to fix this more rigorously. In particular, it would be nice if we had proper support for shadowed variables, as well as unlimited levels of variables depending on one another.
PR Close#53662
Template pipeline previously mangled CSS property names like
`--camelCase` when used in host style bindings. Note: It still *does*
mangle these names in static style attrs, both in host bindings and on
elements. This is clearly wrong, but is consistent with what TDB does
today.
PR Close#53665
Currently compiling input transform in local mode breaks, since compiler does static analysis for the transform function, and this cannot be done in local mode if the function is imported from another compilation unit. In this fix the static analysis is ditched in local mode.
PR Close#53645
It's possible for attributes to have a namespace, we need to handle this
possiblity for both attribute instructions and attributes extracted to
the consts array.
PR Close#53646
The way we were handling ICU placeholders was not compatible with using
interpolations on attributes of elements inside the ICU. This change
refactors the handling of ICU placeholders and unifies the way
expression and tag placeholders work inside ICUs.
The new approach modifies the ingest logic to add the placeholder on to
the TextOp rather than the TextInterpolationOp. This is because, in
ICUs, we may need multiple i18n expressions created from the
interpolation expressions to roll up into the same placeholder. ICUs
essentially do the interpolation at compile time, combining the static
strings with special placeholder strings that represent the expression
values.
PR Close#53643
Consider a case when an explicit `this` read is inside a template with a context that also provides the variable name being read:
```
<ng-template let-a>{{this.a}}</ng-template>
```
Clearly, `this.a` should refer to the class property `a`. However, in today's Angular, `this.a` will refer to `let-a` on the template context.
Amazingly, both TemplateDefinitionBuilder and the Typecheck block have the same bug, and are consistent with each other! This is because `ImplicitReceiver` extends `ThisReceiver` in the parser AST, which is an insane gotcha.
In this commit, I patch the template pipeline to emulate this behavior as well.
To actually fix this nastiness, we have to:
- Update `ingest.ts` in the Template Pipeline (see the corresponding comment)
- Check `type_check_block.ts` in the Typecheck block code (see the corresponding comment)
- Turn off legacy TemplateDefinitionBuilder
- Fix g3, and release in a major version
PR Close#53594
`ng-content` elements, and thus their corresponding projection instructions, can have many attributes on them. Some of these attributes may result in special behavior. For example, `ngProjectAs` and `i18n-foo` both result in special const collection, into the approprate BindingKind slot in the const array. Additionally, `i18n-foo` needs to recieve all the additional i18n attribute processing.
We solve this by subjecting `ng-content` attributes to all the same pipeline logic that applies to attributes on elements, and then allow the element const collection phase to collect them.
PR Close#53594
For regular templates, any listener will have its name const collected into the bindings section of the element consts.
In contrast, host bindings omit listener names from their hostAttrs. This is a strange and inconsistent behavior, so we hide it behind a compatiblity mode flag.
PR Close#53594
It's possible for the user to create a host attrbiute binding with a
name that makes it _look_ like a class binding `{['class.foo']: ''}`, we
were previously treating these as actual class property bindings. This
change fixes the logic so that only true property bindings cam be
converted to class property bindings.
Note: A user who added an attribute like the above almost certainly
intended to create an actual class property binding. It would be nice if
we could add a diagnostic to warn them about this.
PR Close#53626
Further refine the template pipeline's behavior w.r.t. duplicate values
in the consts array to better align its behavior with TDB. In particular
this means allowing duplicate values for classes and styles.
PR Close#53596
Adds a test for handling of duplicate bindings. Fow now we replicate the
TDB behavior in template pipeline, which is: For style and class text
attributes, only keep the last one. For all other text attributes, add
all of the values to the consts array.
PR Close#53596
The for loop tracking function doesn't allow references to local template variables, aside from `$index` and the item which are passed in as parameters. We enforce this by rewriting all variable references to the components scope.
The problem is that the logic that rewrites the references first walks the view tree and then checks if the variable is `$index` or the item. This is problematic in nested for loops, because it'll find the `$index` of the parent.
These changes resolve the issue by checking for `$index` and the item first.
Fixes#53600.
PR Close#53604
Changes template pipeline to be less aggressive in const collecting
attrs, to match the behavior of template definition builder. There is
nothing wrong with the more aggressive const collection, and in fact it
would be good to re-enable it later, but for now this makes it easier to
transition from TDB to template pipeline.
Also adds a test to verify that sensitive iframe attributes are properly
validated.
PR Close#53580
TemplateDefinitionBuilder is apparently more careful about when it attempts to split namespaces in attribute values. However, we are doing this on style attributes, which might start with a single `:`. Rather than refactor our logic to only try to split namespaces in some cases, we can just add an option to make namespace splitting fail gracefully. We only use this option for attributes, not elements.
Note also: the compiled code for this, while "correct" is absolutely insane. Maybe we should consider fixing this, as a matter of principle.
PR Close#53574
Some elements may have multiple bindings with the same name. We should accept and emit them all, as long as they have different kinds.
Co-authored-by: Miles Malerba <mmalerba@users.noreply.github.com>
PR Close#53574
The template pipeline was previously not reserving a variable slot for the result of the `deferWhen` instruction, which caused the `defer when` feature to crash at runtime.
PR Close#53574
When an element is self-closing, it will cause an `element` instruction to be emitted (instead of `elementStart`/`elementEnd`). In that case, we should use map whole source span for the instruction, not just the starting span.
PR Close#53574
The template pipeline was producing slightly different names than TemplateDefinitionBuilder for defer deps functions. I have added a workaround in the name of backwards compatibility, to avoid suffixing the const pool function names.
PR Close#53574
Previously when we found an ICU that was the only translatable content
in its i18n block, we assigned the block's i18n context to the ICU.
However, we neglected to set the contextKind to inidcate that the
context was associated with an ICU. As of this change we now set the
correct contextKind.
This change also refactors the context creation to explicitly separate
creation of contexts for attributes, root i18n blocks, child i18n
blocks, and ICUs. This allows us to more easily ensure that contexts are
shared appropriately between i18n blocks and ICUs.
Finally, this change also refactors the i18n message extraction pahse to
simplify how contexts are converted to i18n messages. This
simplification should make it easier to merge i18n contexts and i18n
messages into a single op in a future refactor.
PR Close#53557
Whenever an input of a directive changes, the semantic symbol should
reflect this change for the type check API. This is important because
signal inputs require special output in the type checking blocks- hence
we need to ensure that such type checking blocks are re-generated
properly.
Test verify that incremental type-checking builds work as expected now.
PR Close#53521
Whenever a signal input is captured in a type check block, we will
insert an import. This will change the import graph so that the full
TypeScript program cannot be structurally re-used.
We can fix this trivially by ensuring the import graph remains stable,
by always generating an import to e.g. `@angular/core`. This fixes the
issue nicely for type-check block files. A test verifies this.
For inline code, such as TCB inline or the type constructors inline,
this fix is not applicable because we would change user-input source files,
adding new edges that would not exist for subsequent builds- causing the
program to be not re-used completely. One idea was to rely on the
existing edge that can be assumed to exist for directive code files.
This is true technically, but in practice TS does not deduplicate
imports- so our new namespace import when referencing our symbols will
invalidate the re-use. We will address this in a follow-up. There are a
couple of options, such as working with the TS team, updating the
existing edge, or inlining our helpers as well.
PR Close#53521
`o.WrappedNodeExpr` can show up in some cases, when a host binding's value is inside a TS expression.
It's an open question whether we will need to support all of the TS expression types as a result.
PR Close#53478
For some reason, the parser reuses the same field to store the animation phase and the event target. We were incorrectly interpreting the presence of any value on that field as an animation phase, leading us to incorrectly emit synthetic listener instructions for listeners on events with targets. This bug is now fixes.
PR Close#53478
`$any` should be interpreted as a cast, not as a context read of a variable called `$any`. This already worked in template compilations, but the relevant phase was not enabled for host bindings.
PR Close#53478
Fixes that the compiler was throwing an error if an ambient type is used inside of an input `transform` function. The problem was that the reference emitter was trying to write a reference to the ambient type's source file which isn't necessary.
Fixes#51424.
PR Close#51474
Adds support for sanitizing host bindings. Since the tag name of the
element the host binding is being set on isn't always known, we have to
consider multiple possible security contexts.
This commit also adds additional tests to help verify correct behavior
of the sanitization logic for different edge cases.
PR Close#53513
Use the DomElementSchemaRegistry to determine the correct security
context for static attributes, and pass it along during ingestion. Then
during the resolve sanitizers phase, use the security context to
determine if a trusted value function is needed
PR Close#53473
Consider the case:
```
<button *ngIf="true" [@anim]="field"></button>
```
Only the inner `button` should recieve a `property` instruction for the animation binding. We were previously emitting one for the implicit `ng-template` as well, and collecting it into the consts for the `ng-template`. Both of these issues are now fixed.
PR Close#53457
The behavior of explicit bindings on `ng-template`s was untested, and we differed from `TemplateDefinitionBuilder` significantly. We now have much more similar behavior, although not 100% identical.
For example, consider this templarte:
```
<ng-template l="l1" [p]="p1" [attr.a]="a1" [class.c]="c1"></ng-template>
```
It's not clear what a class binding on an `ng-template` would actually do. Nonetheless, it's well-defined behavior in TemplateDefinitionBuilder, which emits `property` instructions for all three bindings, and people actually do this in google3.
Note that some of these bindings don't really make much sense, but we have to support them for compatibility purposes.
See comments for an in-depth explanation of all the logic.
Also, add a test to exercise the problematic case.
PR Close#53457
The Template Pipeline has had a number of tricky bugs involving bindings on structural elements.
Consider this template:
```
<div *ngIf="true" [class.bar]="field"></div>
```
We were incorrectly emitting `ɵɵclassProp` on *both* the template's view, and the inner view. The solution is to just emit an extracted attribute on the enclosing template, so it still shows up in the const array, but does not affect the update block.
We will refactor binding ingestion soon, but this commit improves our correctness before any big refactor.
PR Close#53457
These patches are no longer necessary with the current state of the
type packages and the code within the repository. The types are now
included in the already required babel.d.ts file for the relevant
babel packages (currently: `@babel/core` and `@babel/generator`).
PR Close#53441
@for does not use actual TemplateOps, but instead has a similar
RepeaterCreateOp. This commit adds support for this op to the relevant
i18n phases.
PR Close#53440
This test actually passes, template pipeline just orders the translated
messages and consts array differently. Since the order isn't important,
we just fork off an alternate golden file for template pipeline.
PR Close#53459
I discovered this failure while looking at presubmit results. We appear to still have ordering issues, when more update ops are present.
PR Close#53405
While running a g3 presubmit, I discovered two related novel failure modes:
1. Simple case: this new test uses an `ngFor` structural directive, which binds a context variable. That variable is immediately used in an attribute binding. It looks like we generate an extra attribute instruction, which might result in an invalid property read at runtime.
2. Complex case: this is another attribute binding, this time on a structural element, inside of an `ng-template`. Not sure what's going on here.
PR Close#53405
Previously, binding ops only knew whether they applied to a structural template (and even this was actually very misleading!).
Now, binding ops have full information about what kind of template they apply to, if any (e.g. plain template, structural template, etc). Additionally, each binding knows whether it `IsStructuralTemplateAttribute`, which is a property of the binding rather than the template target.
In the future, we should refactor this to unify the various flags that can describe binding types, as well as the flags that describe template targets, into a single and comprehensive field on binding ops.
PR Close#53405
Previously, we created i18n contexts for i18n attributes in ingest. This turned out to be the wrong approach, because we don't always want to produce i18n messages for all i18n attributes! In fact, several kinds of i18n attributes on elements with structural directives should not produce their own messages.
This commit also contains related refactors to fix one such structural directives test.
PR Close#53405
When a binding is present on an element with a structural directive, that binding is parsed onto *both* the synthetic `ng-template`, as well as the inner element. However, we do not want to create different i18n messages for both bindings; we only want to generate a new i18n message for the inner, "real" element.
PR Close#53405
Listener instructions should not be inside the i18n block. In order to avoid this, we ingest bindings on an element before starting the i18n block.
We previously missed this case because almost all bindings result in *update* instructions, which don't need to be ordered relative to i18nStart/i18nEnd create instructions. However, listeners are the only kind of binding that gets ingested into the create block.
PR Close#53405
Previously, our i18n slot moving process was buggy. Specifically, it was not resilient to cases in which a create op consumed a slot, but no update ops depended on that slot.
The new algorithm fixes this issue, and is also easier to understand.
PR Close#53405
I18n expressions logically have both a target and an owner:
- For i18n text expressions, the owner is the i18nStart instruction. The target is initially the same, but later moves to be the last slot consumer in the i18n block.
- For i18n attribute expressions, the owner is the I18nAttributes config instruction, whereas the target is the ElementCreate that hosts the attribute.
This refactor makes the code clearer in quite a few plases.
Additionally, we now perform a lot of the i18n processing earlier. For example, re-targeting and re-ordering of i18n expressions happens *before* apply instructions are generated. As a result, the re-ordering logic is a lot simpler.
These changes also have consequences on i18n const collection, along with a couple other minor changes.
PR Close#53376
These changes add an option to the `extendedDiagnostics` field that allows the check from #53190 to be disabled. This is a follow-up based on a recent discussion.
PR Close#53311
Add support for i18n attributes:
- Generate i18n contexts from i18n attributes, and extract the eventual messages into the constant pool.
- Emit I18nAttributes config instructions when needed.
- Use the generated i18n variable in the appropriate places, including extracted attribute instructions, as well as I18nAttributes config arrays.
PR Close#53341
Currently we generate the following TCB for a `@for` loop:
```ts
// @for (item of items; track item) {...}
for (const item of this.items) {
var _t1 = item;
// Do things with `_t1`
}
```
This is problematic if the item name is the same as a global variable (e.g. `document`), because when the TCB has references to that variable (e.g. `document.createElement`), it'll find the loop initializer instead of the global variable.
These changes fix the issue by generating the following instead:
```ts
for (const _t1 of this.items) {
// Do things with `_t1`
}
```
Fixes#53293.
PR Close#53319
Previously we recorded separate param values for a strucural directive
and the element tag it goes on. We then later attempted to combine those
into a single value. However in some cases this merging logic matched
the directive with the wrong tag.
This change implements an alternate approach where we match the
directive to its element tag from the start, while we're traversing the
ops. This should be a more robust solution.
PR Close#53327
We previously failed to populate the attributes property on projection
ops, this commit populates it and later strips out the "select"
attribute.
PR Close#53327
Previously we failed to reset the sub-template index counter when we
exited a root block. This caused following sibling blocks to start
counting at the wrong index.
PR Close#53327
It is possible for ICUs to be nested inside other ICUs. This change
adjusts our ingestion logic to create extra interpolation ops for the
nested ICUs during ingestion.
PR Close#53300
We previously had an assertion that every placeholder in the i18n AST
had a corresponding param in the output. However, there are some cases
such as interpolations nested inside ICUs where this assertion is not
true. This change simply removes the asserion.
PR Close#53300
ICUs may share a placeholder, and in that case they need special
post-processing. This change adds logic to cover this possibility. In
particular, we set the param to a special placeholder value and then
pass an array containing the sub-message variables as a post-processing
param.
PR Close#53300
When we re-assign the slot dependencies for the i18nExprs, we should
move them down below the other ops that target their same slot. This
keeps the behavior consistent with TDB
PR Close#53300
This commit fixes an issue where having an expression with nullish coalescing in styling host bindings leads to JS errors due to the fact that a declaration for a temporary variable was not included into the generated code.
Resolves#53295.
PR Close#53305
As part of this fix, I realized that child i18n blocks don't need their
own context. Instead, we can just add their params directly to the
context for their root block, and forgo the step of merging the contexts.
PR Close#53209
ICU sub-messages should be recorded as belonging to the message for the
root i18n block they are part of. This ensures that they still get
emitted even if they are nested in a child template.
PR Close#53209
This is a follow-up to the fix from #52414. It adds a diagnostic that will tell users when a control flow is preventing its direct descendants from being projected into a specific component slot.
PR Close#53190
Adds support for inheriting host directives from the parent class. This is consistent with how we inherit other features like host bindings.
Fixes#51203.
PR Close#52992
This is a follow-up to the fix from #52414. It adds a diagnostic that will tell users when a control flow is preventing its direct descendants from being projected into a specific component slot.
PR Close#52726
The `$first`, `$last`, `$even` and `$odd` variables in `@for` loops aren't defined on the template context of the loop, but are computed based on `$index` and `$count` (e.g. `$first` is defined as `$index === 0`). We do this calculation by looking up `$index` and `$count` when one of the variables is used.
The problem is that all `@for` loop variables are available implicitly which means that when a nested loop tries to rewrite a reference to an outer loop computed variable, it finds its own `$index` and `$count` first and it doesn't look up the ones on the parent at all. This means that the calculated values will be incorrect at runtime.
These changes work around the issue by defining nested-level-specific variable names that can be used for lookups (e.g. `$index` at level `2` will also be available as `ɵ$index_2`). This isn't the most elegant solution, however the `TemplatDefitinionBuilder` wasn't set up to handle shadowed variables like this and it doesn't make sense to refactor it given the upcoming template pipeline.
Fixes#52917.
PR Close#52931
Reworks the `repeater` instruction to go through `advance`, instead of passing in the index directly. This ensures that lifecycle hooks run at the right time and that we don't throw "changed after checked" errors when we shouldn't be.
Fixes#52885.
PR Close#52935
In some cases ICU expression placeholders may have trailing spaces that
need to be trimmed when matching the placeholder to its corresponding
text binding.
PR Close#52698
We were previously counting the i18n expression index and deciding when
to apply i18n expressions based on the i18n context. These should be
done based on the i18n block instead.
PR Close#52698
The previous commit added support for interpolated text in ICUs, but it
made the assumption that the interpolation would be a single variable
read expression.
To properly support all kinds of interpolation expressions, this commit
refactors how ICUs are ingested to allow us to re-use the same logic we
use for bound text outside of ICUs.
To accomplish this, the `IcuOp` creation op has been removed in favor of
a pair of ops: `IcuStartOp` and `IcuEndOp`, that mark the beginning and
end of the ICU. Now, instead of inserting an `IcuUpdateOp` in the update
IR, we call `ingestBoundText` and use the presence of the surrounding
`IcuStartOp` and `IcuEndOp` to match the interpolation with the ICU.
PR Close#52698
Previously ICUs were assumed to only generate a single i18n expression
per ICU. However, it is possible for ICUs to contain text interpolations
which requires additional expressions. This commit adds support for
multiple expressions per ICU.
PR Close#52698
ICUs that contain element tags need extra parameters for the i18n
message. These are in addition to the element slot params that are
already added to the parent i18n block's params. In this commit we add a
new phase to fill in these placeholders.
PR Close#52698
Previously the template pipeline sorted i18n message params before
adding the sub-message placeholders. Now its sorts after all
placeholders are added.
Both the template pipeline and TemplateDefinitionBuilder previously
failed to sort the post-processing params. They both now sort these as
well. This is safe to change in TemplateDefinitionBuilder, as it does
not change anything about the functionality, it simply ensures that
params map in the output has the keys ordered in a way that can be
easily reproduced in the template pipeline.
PR Close#52698
Fixes that all implicit variables in `@for` loops were inferred to be numbers, even though most are actually boolean.
Note that I also had to work around a weird TypeScript behavior in `tsDeclareVariable` where usually we declare variables in the following format:
```
var _t1: <type> = null!;
```
This works in most cases, but if the type is a `boolean`, TypeScript infers the variable as `never`, instead of `boolean`. I've worked around it by adding an `as boolean` to the initializer.
Fixes#52730.
PR Close#52732
Adds the private `_enableBlockSyntax` flag that can be used by the language service to disable blocks on apps that aren't on Angular v17.
PR Close#52683
Now that two-way bindings work correctly with implicit receivers, we can fix the corresponing source map tests. The main issue was that we were not properly mapping `elementEnd` for elements with no closing tag (self-closing elements).
PR Close#52479
Some two-way bindings tests were not working properly, because we could not ingest the implicit receiver required to write to the `ngModelChanges` property. Now, we properly resolve that implicit receiver to the root component context.
Also, add some tests, both for the simple case, and the case where the listener is inside a nested view.
PR Close#52479
Some `defer` blocks have external dependencies on other components or directives. These dependencies need to be extracted into deps functions, which either return local deps, or use a dynamic import for non-local deps. Template Pipeline can now generate these functions.
PR Close#52479
When an `ng-template` has local refs, such as `<ng-template #foo>`, we must emit a `ɵɵtemplateRefExtractor` argument to the template creation functino. The template pipeline now supports this.
PR Close#52479
`TemplateDefinitionBuilder` is somewhat unreliable about extracting constant attributes (e.g. `[attr.foo]="'one'"`). It never extracts const non-string expressions, and usually, but not always, extracts const string expressions. Template pipeline consistently extracts const strings, and we add new goldens for a couple such cases.
PR Close#52479
Some defer triggers, such as `hover`, expect a local reference as an argument. For example, `@defer (on hover(target))` waits until the user hovers over the target.
However, these defer conditions also have a nullary form, in which the trigger is implicitly the first element in the placeholder block. We now support that case in template pipeline.
PR Close#52479
We already supported `defer on` conditions, which become instructions in the create mode block.
Now, we also support `defer when` conditions, where are very similar, with the notable difference that they go in the update block (because a user-supplied condition must be re-evaluated on each update.)
PR Close#52479
Previously we supported ICUs where the ICU itself represetned the entire
translated message. This change allows ICUs to act as a sub-message
inside other translated messages.
PR Close#52503
Discovered this while validating #52414 against Angular Material. We were projecting `<ng-template>` nodes at the root of `@if` and `@for` with the `ng-template` tag name which enables directive matching and applies the directive to the control flow node.
These changes fix the issue by never passing along the `ng-template` tag name.
PR Close#52515
TypeScript JsDoc parsing, by default, treats occurences of Angular decorators (e.g. `@Component`) in JsDoc comments as JsDoc tags. This commit escapes these decorator strings by copying the raw JS doc onto a dummy symbol in a new SourceFile to make TypeScript re-parse the comment.
PR Close#52481
With the directive-based control flow users were able to conditionally project content using the `*` syntax. E.g. `<div *ngIf="expr" projectMe></div>` will be projected into `<ng-content select="[projectMe]"/>`, because the attributes and tag name from the `div` are copied to the template via the template creation instruction. With `@if` and `@for` that is not the case, because the conditional is placed *around* elements, rather than *on* them. The result is that content projection won't work in the same way if a user converts from `*ngIf` to `@if`.
These changes aim to cover the most common case by doing the same copying when a control flow node has *one and only one* root element or template node.
This approach comes with some caveats:
1. As soon as any other node is added to the root, the copying behavior won't work anymore. A diagnostic will be added to flag cases like this and to explain how to work around it.
2. If `preserveWhitespaces` is enabled, it's very likely that indentation will break this workaround, because it'll include an additional text node as the first child. We can work around it here, but in a discussion it was decided not to, because the user explicitly opted into preserving the whitespace and we would have to drop it from the generated code. The diagnostic mentioned point #1 will flag such cases to users.
Fixes#52277.
PR Close#52414
Prior to this change, the transform function would be referenced with a potentially
relative import into an external declaration file. Such imports are not portable
and should not be created in this context. This commit addresses the issue by threading
though the originally used module specifier by means of the `Reference` type.
Fixes#52324
PR Close#52437
This commit fixes an issue where using literal types in the arguments of an input coercion
function could result in emitting invalid output, due to an assumption that TypeScript makes
when emitting literal types. Specifically, it takes the literal's text from its containing
source file, but this breaks when the literal type node has been transplanted into a
different source file. This issue has surfaced in the type-check code generator and is
already being addressed there, so this commit moves the relevant `TypeEmitter` class
from the `typecheck` module to the `translator` module, such that it can be reused for
emitting types in the type translator.
Fixes#51672
PR Close#52437
The previous commits provided the scaffolding for `defer on`. In this commit, we build on that work, adding triggers for `immediate`, `timer`, `hover`, and `viewport`.
PR Close#52387
Previously, we supported a `HasConst` trait, allowing an op to be const collected automatically. However, that approach had the shortcoming that each op could only collect a single constant.
Instead, we now provide a `ConstCollectedExpr`, which collects constants at the expression level, allowing ops to have multiple collectible consts.
Then, we use this new abstraction to support the `defer on` conditions.
PR Close#52387
Previously, we had an "empty shell" implementation of defer conditions, and we used separate ops to represent secondary defer blocks.
Now, we have a real scaffolding for supporting the various defer conditions, and the secondary defer block information has been refactored onto the main defer op.
Additionally, to enable this, we refactor the way that using slot indices works. Instead of having a trait that causes users of slot indices to be linked to the allocated slot, we share a single `SlotHandle` object by reference. This allows an op to use slot information for more than one Xref at a time, and eliminates a layer of indirection.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#52387
Enables a handful of i18n tests that are currently skipped, but pass if
enabled. Some of them require alternate golden files because of
inconsequential differences in the cost array order.
PR Close#52390
This commit expands docs extraction for classes and interfaces to include inherited members. This relies on the type checker to get the _resolved_ members of the type so that the extractor doesn't need to reason about inheritance rules, which can get tricky (especially with regards to method overloads).
PR Close#52389
This commit adds decorators to the extracted API docs. It makes some
very hard-coded assumptions about the pattern used to declare decorators
that's extremely specific to what the framework does today.
PR Close#52389
Previously, we would emit *two* pipe creation instructions for each pipe in a switch case. This is because we were visiting both the transformed and raw versions of the pipe bindings.
Now, we clear the raw case expressions array after generating the transformed test expression.
Also, we introduce some new goldens, because our pipe creation order is harmlessly different.
PR Close#52289
We roughly attempt to match TemplateDefinitionBuilder's pipe creation order, by placing pipe creation instructions after their target elements. However, we cannot fully emulate the "inside-out" ordering TemplateDefinitionBuilder uses when multiple pipes apply to one element, because TemplateDefinitionBuilder creates the pipes as expressions are visited, from the leaves up. Our order is perfectly adequate though.
We also add a non-compatibility-mode ordering, which just appends them to the end of the create block. This is better because it allows for more chaining opportunities.
PR Close#52289
Singleton property interpolation instructions consume only one variable, but are still emitted as an interpolation instruction (they cannot be collapsed because `propertyInterpolate` implicitly stringifies its argument.)
PR Close#52289
We were incorrectly emiting a extracted constant pool index for the final argument of the projection instruction. It actually takes an array literal.
(N.B.: This means we re-create the array every time! We should probably modify the runtime to use a const index for this.)
Additionally, we alter the projection op to not extend the element op base type.
PR Close#52289
The correct order of attributes and properties is:
1. Interpolated properties
2. Interpolated attributes
3. Non-interpolated properties
4. Non-interpolated attributes
This includes an additional nuance: singleton attribute interpolations, such as `[attr.foo]="{{bar}}"`, will be "collaped" into a simple `attribute` instruction. However, this is *not* the case for singleton property interpolations! The ordering phase must take this nuance into account to match the TemplateDefinitionBuilder order.
After the project lands, it might be nice to also collapse singleton property interpolations.
PR Close#52289
Previously, we ran the ordering phase near the end of the compilation. However, this meant that phases like slot assignment and variable offset assignment would happen first, and then the nice, monotonically-increasing orders would be scrambled by the reordering.
It's much more intelligible to order first, and then perform these assignments. However, to make this happen, some modifications to the ordering phase are required. In particular, we can no longer rely on `advance` instructions to break up orderable groups.
PR Close#52289
Many instructions consume variable slots, which are used to persist data between update runs. For top-level instructions, the offset into the variable data array is implicitly advanced, because those instructions always run.
However, instructions in non-top-level expressions cannot be assumed to run every time, because they might be conditionally executed. Therefore, they cannot implicitly advance the offset into the variable data, and must be given an explicitly assigned variable offset.
TemplateDefinitionBuilder assigned offsets top-to-bottom for all instructions *except* pure functions. Pure functions would be assigned offsets lazily, on a second pass.
Template Pipeline can now imitate this behavior, when in compatibility mode: pure functions are assigned offsets on a second pass.
This also makes the "variadic var offsets" phase unnecessary -- the new approach is more general and correct.
PR Close#52289
Previously, inside an event listener, template pipeline would always save the context from restoring a view, e.g.
```
const restored_ctx = r0.ɵɵrestoreView(s);
```
This is usually correct! However, consider the case of a listener in the template's root view. The appropriate context will already be available via closure capture, and we can just use it (as `ctx`).
Now, the context resolution phase understands that we don't need to use the restored view's saved context if we would have access to it by closure.
Note: we also create a new golden, because the const array is in a harmlessly different order.
PR Close#52289
Previously, the template pipeline did not handle "empty" reads gracefully: it would emit syntactically invalid reads of empty properties. Now we read `$implicit`.
This allows us to enable a test that relies on `$implicit`. However, we also have to create another golden, because our variable inlining is more aggressive.
PR Close#52289
We currently allow elements to be collapsed around pipe creation instructions. TemplateDefinitionBuilder disallows this, but only sometimes. Collapsing in this case is actually less generated code, and it's OK to allow it.
PR Close#52289
The template pipeline can now generate track functions, and extract them into the constant pool (or optimize them if needed). Additionally, context variables such as `$index` can be used inside track functions and for loop bodies.
PR Close#52001
Add support for `repeaterCreate` and `repeater` instructions. Correctly count decls and vars, and support primary and empty blocks.
`track` functions are not yet extracted.
PR Close#52001
In #52110 the compiler was changed to produce `if` statements when type checking `@switch` in order to avoid a bug in the TypeScript compiler. In order to avoid duplicate diagnostics, the main `@switch` expression was ignored in each of the `@case` comparisons. This appears to have caused a regression where comparing incompatible types wasn't being reported anymore.
These changes resolve the issue by wrapping the expression in parentheses which allows the compiler to report comparison diagnostics while ignoring diagnostics in the expression itself.
Fixes#52315.
PR Close#52322
Now the method `getConstructorDependencies` no longer needs to do any post analysis, and can rely on the reflection host's result to generate ctor params. This will automatically include invalid factories which fix the issue.
PR Close#52215
ICUs can be used outside of an i18n block. In this case the ICU should
be automatically wrapped in a new i18n block. This commit adds a new
phase to handle wrapping these bare ICUs.
PR Close#52250
ICU params in i18n messages are now resolved in the post-processing call
rather than in the initial message creation. This matches the output
generated by TemplateDefinitionBuilder.
PR Close#52250
ICUs are now ingested by adding ops to both the creation and update IR.
Both of these ops are ultimately removed before reification, but they
are needed to coordinate and link data between the creation and update
ops. This is done in a new ICU extraction phase that removes both ICU
ops and adds an i18nExpr op to the update IR.
PR Close#52250
This commit extracts the API reference info for generic parameters for
classes, methods, interfaces, and functions. It includes any constraints
and the default type if present.
PR Close#52204
Placing a structural directive on an element with an `i18n` attribute
was generating too many i18n blocks. This was due to both the element
and the template generating their own i18n block. To fix the issue, we
no longer generate top-level i18n blocks for structural directive
templates.
PR Close#52202
Structural directives on an ng-template (e.g. <ng-template *ngIf>) were
being assigned the wrong tag name ('ng-template' instead of null).
PR Close#52202
Fixes handling of placeholders for self-closing tags. Self-closing tags
set a combined value for the start tag placeholder, rather than separate
values for the start and close placeholders.
This commit also enables a number of now passing tests. For some of
these tests I had create a separate golden file due to the different
ordering of the const array. In the template pipeline, i18n and
attribute const collection happen in different pahses and we therefore
get a different order than TemplateDefinitionBuilder, which collected
everything in one pass. The order should not affect the overall behavior.
PR Close#52195
The way we were propagating params up to parent i18n ops didn't account
for the fact that a parent and child could both have a value for the
same placeholder. In order to properly merge the value for these cases,
we need to propagate the params up *before* serialization. Therefore I
removed the standalone param propagation phase and folded the logic into
the placeholder resolution phase.
PR Close#52195
Currently the compiler allocates a variable slot to the `@for` loop expression which ends up unused since we don't store the result on the `LView`.
PR Close#52158
A new flag added to the component's debug info to determine whether to throw runtime error (in dev mode) if component is being rendered without its NgModule. This flag is only set for non-standalone components.
PR Close#52061
Orphan component is an anti-pattern in Angular where a component is rendered while the NgModule declaring it is not installed. It is not easy to capture this scenario, specially in compile time. But it is possible to capture a special case in runtime where the component is being rendered without its NgModule even loaded into the browser. This change adds a flag in cli compiler option to enable such checking, and throwing a runtime exception if it happens. Note that such check is only done in dev mode.
Currently the check requires some generated code that is behind ngJitMode flag (i.e., call to ɵɵsetNgModuleScope), and the new flag can be set only if JIT mode is enabled (i.e., supportJitMode=true) otherwise an error will be thrown.
The orphan component is a main blocker for rolling out local compilation in g3. This option is needed for identifying and isolating such cases.
PR Close#52061
Based on recent discussions, these changes remove the Windows CI check because it has been too flaky for too long. Furthermore, we've concluded that the simulated file system in the compiler tests already catches the same set of bugs as running the tests on a real Windows system.
PR Close#52140
This commit adds support for extracting type alises. It currently
extracts the raw written type from the source without performing any
resolution, such as for resolving `typeof` queries, as current Angular
public APIs do not rely on this.
PR Close#52118
Fixes that the new block syntax was generating instructions in the wrong order which meant that pipes were being declared too early. This meant that if the block is first in the template, any pipes used in it won't be able to inject things like `ChangeDetectorRef`.
These changes update the compiler and add a bunch of tests to ensure that pipes work as expected.
Fixes#52102.
PR Close#52112
Since expressions in event listener are added inside of a callback, type narrowing won't apply to them anymore. These changes add the logic to create a guard expression that will re-narrow the expression in the callback.
Fixes#52052.
PR Close#52069
Since expressions in event listener are added inside of a callback, type narrowing won't apply to them anymore. These changes add the logic to create a guard expression that will re-narrow the expression in the callback.
Fixes#52052.
PR Close#52069
This commit updates `@defer` logic related to handling `after` and `minimum` parameters tree-shakable.
If `after` or `minimum` was used on a `@loading` or `@placeholder` blocks, compiler generates an extra argument for the `ɵɵdefer` instruction. This extra argument is a reference to a function that brings timer-related code.
PR Close#52042
A new statement will be generated for components which will attach some useful debug info to them to be used in runtime error handling. Currently this only happens in full and local compilation modes.
PR Close#51919
The current implementation assumes a qualified name consists of just two identifier, e.g., Foo.Bar. However it can be more nested, like Foo.Bar.Baz.XX.YY. While such nested patterns are quite uncommon and devs mostly just use two identifier here, the TS compiler seems to throw error if we make such assumption and it broke quite a lot of targets in g3 when compiled in local mode. So here we handle this nested property of qualified names.
PR Close#51947
The custom logic in the generate advance phase for i18n expressions did
not work in all cases. Instead we add a new phase to update the
expression's target op, and then allow the standard advance generation
code to determine the number of advance instructions needed.
Co-authored-by: Dylan Hunn <dylhunn@users.noreply.github.com>
PR Close#51988
This commit adds support for extracting function overloads. Interestingly, this worked in an earlier version when the code was extracting all statements in every source file, but the existing compiler API for extracting all exported declarations from an entry-point only returns the first function declaration in cases when there are overloads.
This also marks abstract classes as abstract, required inputs as required, and filters out Angular-private APIs.
PR Close#52040
We type check `@switch` blocks by generating identical TS `switch` statements in the TCB, however TS currently has a bug where parenthesized `switch` block expressions don't narrow their types. Since we use parenthesized expressions to wrap AST nodes for diagnostics, this will bug will affect all Angular-generated `switch` statements.
These changes work around the issue by generating `if`/`else if`/`else` statements that represent the `switch`.
Some alternatives that were considered:
1. Moving the `switch` expression to a constant - this is fairly simple to implement, but it won't fully resolve the narrowing issue since the same constant will have to be used in expressions inside the different cases.
2. Removing the outer-most parenthesis from the switch expression - this works and allows us to continue using switch statements, but because we use parenthesized expressions to map diagnostics to their template locations, I wasn't sure if it won't lead to worse template dignostics.
Fixes#52077.
PR Close#52110
Fixes that the compiler wasn't picking up pipes used inside defer block triggers as dependencies. We had implemented the `visitDeferredTrigger` visitor method, but it wasn't being called, because we weren't going through the `visitAll` method of the deferred block. We don't use `visitAll`, because child nodes have to be processed differently than the connected blocks and triggers.
Fixes#52068.
PR Close#52071
The `_enabledBlockTypes` config option was removed recently, since we've enabled @-syntax by default. This commit removes `_enabledBlockTypes` references from the `compiler-cli` test cases.
PR Close#52066
This adds API doc extraction for interfaces, largely using the same code paths for classes. The primary difference between classes and interfaces is that classes have member _declarations_ while interfaces have member _signatures_. This largely doesn't matter for the purposes of extraction, but the types are distinct with no common base types, so we have to do a fair amount of type unioning and aliasing.
PR Close#52006
A couple tests were already passing, and just needed to be enabled. This includes tests pertaining to:
* ng-template
* host binding styling slots
* and host animation bindings
* some literal tests (which were missing some $foo$ escaped names)
We add pipeline-specific versions of the following tests, and enable them:
* A local refs test. The consts for the element attributes and the consts for local reference are collected in the reverse order, but the emitted template is functionally the same.
* A safe accesstest. Consider the expression `$any(val)?.foo`. `TemplateDefinitionBuilder` extracts a temporary variable: `($tmp_0_0$ = $ctx$.val) == null ? null : $tmp_0_0$.foo`. It presumably does this because it considers the `$any(...)` to be a function call. However, this is not a real call, so Template Pipeline safely ignores it and declines to generate a temporary.
* Another local refs test. AttributeMarker.Template is emitted at the end of the const array (instead of the middle)
PR Close#51950
Consider an `ng-template` which is generated as a result of a structural directive:
```
<div *ngFor="let inner of items"
(click)="onClick(inner)"
[title]="getTitle()"
>
```
This should logically expand into something like the following:
```
<ng-template [ngForOf]="..." >
<div (click)="..." [title]="..."></div>
</ng-template>
```
Note that the `(click)` handler and the `[title]` property are only present on the inner div, *not* on the enclosing generated `ng-template`.
Previously, Template Pipeline would place these bindings on *both* the tempate and the inner element.
However, we can't just remove them completely, because these bindings should still be matchable on the generated `ng-template` (which is very surprising, but nonetheless true).
We resolve this issue with two improvements:
(1) The ingestion step is now much smarter about determining not only if a binding is on a template element, but whether it actually targets that template element.
(2) We use `ExtractedAttributeOp` directly, rather than going through `BindingOp`, to cause the `ng-template` to still receive these bindings in its `consts` array for matching purposes.
PR Close#51950
For components, the parser already extracts the `important` property (and it is later disregarded). However, because host bindings use a totally separate parsing code path, this was never happing for host bindings.
Here, we add some code to the host style parsing phase to drop the `!important` suffix.
We could solve this category of problems for good by parsing host bindings with the same code as template bindings.
PR Close#51950
Previously, we always generated temporary variable declarations at the beginning of each view's update block. This is wrong, for two reasons:
1. Temporaries can be used in the create block
2. When listeners use temporaries, we should declare them inside the listener.
Now, we always place temporaries at the beginning of the enclosing OpList, and recursively try to generate them when we find a listener.
PR Close#51950
Currently the TCB for aliased `if` blocks looks something like this:
```
// Markup: `@if (expr; as alias) { {{alias}} }
if (block.condition) {
var alias = block.condition;
"" + alias;
}
```
The problem with this approach is that the type of `alias` won't be narrowed. This is something that `NgIf` currently supports.
These changes resolve the issue by emitting the variable outside the `if` block and using the variable reference instead:
```
// Markup: `@if (expr; as alias) { {{alias}} }
var alias = block.condition;
if (alias) {
"" + alias;
}
```
PR Close#51952
Reworks a few more places to output arrow functions instead of function declarations in order to reduce the amount of code we generate. Some of these places include:
* Factories in injectable definitions.
* Forward references.
* `dependencies` function in the component definition.
* `consts` function in the component definition.
PR Close#52010
Updates the TCB for `@for` loop blocks to allow nullable values. The runtime already supports it and this makes it easier to switch from `NgFor`.
Fixes#51993.
PR Close#51997
The template pipeline now supports basic forms of `defer` blocks. This includes the `loading`, `placeholder`, and `error` blocks, as well as the loading and placeholder configuration options.
Lazy dependencies and prefetch are not yet implemented.
PR Close#51942
Enables the new `@` block syntax by default by removing the `enabledBlockTypes` flags. There are still some internal flags that allow special use cases to opt out of the block syntax, like during XML parsing and when compiling older libraries (see #51979).
PR Close#51994
Increases the `minVersion` of component declarations that use bloks to v17 in order to indicate to users that they need to update if the library they're using is on the new syntax, while preserving backwards compatibility for libraries that do not use the syntax.
PR Close#51979
We were previously emitting pure functions as `function foo(args) {return bar;}`, but `TemplateDefinitionBuilder` uses arrow functions instead (`const foo = (args) => bar`). By matching this behavior, we can enable many additional tests.
PR Close#51961
This is a deceptively simple fix for a deep issue. Consider the following template:
```
<button [title]="myTitle" [id]="(auth().identity() | async)" [tabindex]="1">
```
`TemplateDefinitionBuilder` allocates the following variable (binding) slots:
v[0] = [title] binding
v[1] = [id] binding
v[2] = [tabindex] binding
v[3] = pipe binding
v[4] = pipe binding
As you can see, all three top-level property bindings were assigned variable indices. Then, variables for nested expressions were assigned.
Before this change, Template Pipeline would choose the following order:
v[0] = [title] binding
v[1] = [id] binding
v[2] = pipe binding
v[3] = pipe binding
v[4] = [tabindex] binding
With this order, nested expressions have their variables counted and assigned before subsequent top-level property bindings. This results in different variable indices for `pipeBinding` expressions that are not inside the final property binding.
However, this is not just different -- it's actually incorrect! Consider a case like the following:
```
<button [p1]="c ? (a | pipe) : 3" [p2]="b | pipe">
```
These pipe bindings are executed *conditionally*. This means that, because we don't count and assign all the "fixed" variable slots first, i.e. those belonging to the property bindings, their indices might end up incorrect, depending on whether or not a pipeBinding happened as part of the update block.
With this change, we count all variables on top-level ops first, and then descend into all expressions.
PR Close#51961
An `if` block can specify an alias for its main expression. We now support these in the template pipeline:
- We generate a temporary variable for the original expression
- We pass the temporary to the `conditional` instruction's context argument
- We provide the alias's name in the ambient context variables map
The context variables map now also accepts a name whose lookup value on the context object is empty. This will be interpreted as a read of the entire context object.
PR Close#51931
This entails adding a bit of extra logic to the existing conditional ingestion and corresponding phase, because `if` blocks lack a test expression.
Additionally, enable a couple more `switch` tests by resolving a curious issue -- we now consume a variable for conditionals.
PR Close#51931
Adds support for i18n expressions in i18n messages, and allows i18n
messages on templates.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
Co-authored-by: Dylan Hunn <dylhunn@users.noreply.github.com>
PR Close#51876
Adds support for defining `viewport`, `interaction` and `hover` triggers with no parameters. If the framework encounters such a case, it resolves the trigger to the root element of the `@placeholder` block. Triggers with no parameters have the following restrictions:
1. They have to be placed on an `@defer` block that has an `@placeholder`.
2. The `@placeholder` can only have one root node.
3. The root placeholder node has to be an element.
PR Close#51922
If a trigger element can't be accessed from the defer block, we don't generate any instructions for it. These changes add a diagnostic that will surface the error to users.
PR Close#51922
Changes `TemplateDefinitionBuilder` to output i18n message parameters in
sorted order to make it easier for the template pipeline to generate
identical output. This does not result in any functional change, but
will make it much easier to shared output golden files with the template
pipeline.
PR Close#51911
Fixes that we were allocating slots for the expressions of `if`, `else if`, `switch` and `case` blocks which we weren't using for anything.
PR Close#51913
Currently the field encapsulation undergoes some static analysis to check if it is `ViewEncapsulation` enum. Such static check fails in local compilation mode in g3 as the symbol cannot be resolved. On the other hand this field has to be resolved statically as its value determined the generated code. So in local compilation mode we add a lighter resolving logic which relies only on local information.
PR Close#51848
Currently the field changeDetection undergoes some static analysis to check if it is `ChangeDetectionStrategy` enum. Such static check fails in local compilation mode in g3 as the symbol cannot be resolved. So in local compilation mode we bypass such resolving and just write the expression as is into the component definition.
PR Close#51848
Switches the syntax for blocks from `{#block}{/block}` to `@block {}` based on the feedback from the community.
Read more about the decision-making process in our blog: https://blog.angular.io/meet-angulars-new-control-flow-a02c6eee7843
The existing block types changed in the following ways:
**Conditional blocks:**
```html
<!-- Before -->
{#if cond}
Main content
{:else if otherCond}
Else if content
{:else}
Else content
{/if}
<!-- After -->
@if (cond) {
Main content
} @else if (otherCond) {
Else if content
} @else {
Else content
}
```
**Deferred blocks**
```html
<!-- Before -->
{#defer when isLoaded}
Main content
{:loading} Loading...
{:placeholder} <icon>pending</icon>
{:error} Failed to load
{/defer}
<!-- After -->
@defer (when isLoaded) {
Main content
} @loading {
Loading...
} @placeholder {
<icon>pending</icon>
} @error {
Failed to load
}
```
**Switch blocks:**
```html
<!-- Before -->
{#switch value}
{:case 1}
One
{:case 2}
Two
{:default}
Default
{/switch}
<!-- After -->
@switch (value) {
@case (1) {
One
}
@case (2) {
Two
}
@default {
Default
}
}
```
**For loops**
```html
<!-- Before -->
{#for item of items; track item}
{{item.name}}
{:empty} No items
{/for}
<!-- After -->
@for (item of items; track item) {
{{item.name}}
} @empty {
No items
}
```
PR Close#51891
Reworks the `setClassMetadata` calls to generate arrow functions instead of full anonymous function declarations. While this won't have an effect on production bundle sizes, it's easier to read and it should lead to small parsing time gains in dev mode.
PR Close#51637
Adds support for `on viewport` and `prefetch on viewport` triggers which will load the deferred content when the element comes into the view.
PR Close#51874
Adds support for `on hover` and `prefetch on hover` triggers. Some code had to be moved around so it could be reused from the `on interaction` triggers.
PR Close#51874
Updates the logic that generates the instructions for the `on interaction` and `prefetch on interaction` triggers to their final shape. Now the instructions take two arguments:
1. `triggerIndex` - index at which to find the trigger in the view where it will be rendered.
2. `walkUpTimes` - tells the runtime how many views up it needs to go to find the trigger element. If the argument is omitted, it means that the trigger is in the same view as the deferred block. A positive number means that the runtime needs to go up X amount of times to find the trigger. A negative number means that the trigger is inside the root view of the placeholder block. Negative numbers are capped at -1 since the placeholder is always in the same position at runtime.
PR Close#51830
So far this docs extraction has pulls API info from all exported symbols in the program. This commit changes to extracting only symbols that are exported via a specified entry-point. This commit also exports the docs entities through the compiler-cli `index.ts`.
PR Close#51828
Currently the compiler in local mode assumes that the standalone component imports are array expressions. This is not always true as they can be const variables as well. This change allow non-array expressions for standalone component imports field and passes that expression to the downstream tools such as deps tracker to compute the component's deps in runtime.
PR Close#51819
Current implementation assumes that NgModule imports/exports fields are always arrays and thus it concats them for the injector definition. But this is not always the case and imports/exports could be non-arrays such as const variable. Such pattern happens in g3 and so must be addressed.
PR Close#51819
Adds support for template type checking of the `track` expression of a `for` loop block. Tracking expressions are treated as any other expression for type checking, however we have some special validation that doesn't allow them to access template variables and local references.
PR Close#51690
Adds support for template type checking inside `for` blocks. It is implemented by generating a JS `for...of` statement inside the TCB. The various loop variables (e.g. `$index`) are implemented by declaring a local number variable.
PR Close#51690
Adds support for template type checking inside `if` blocks. It is implemented by generating a JS `if` statement inside the TCB which allows us to do type narrowing of the expression. The `as` parameter is implemented by declaring a variable inside the `if` statement.
PR Close#51690
Adds support for template type checking inside `switch` blocks. It is implemented by generating a JS `switch` statement inside the TCB which allows us to do type narrowing of the expression.
PR Close#51690
Content project allows the content to specify its own selector for matching against content projection slots, using the `ngProjectAs` special attribute. We can now treat this attribue specially, and generate the appropriate flag in the consts array, followed by the parsed CSS selector.
PR Close#51544
Supporting content projection requires us to emit three new kinds of output:
1. An `ngContentSelectors` field on the component metadata, which points to an array in the constant pool with all of the `select` attributes from `<ng-content>` elements.
2. One `projectionDef` instruction at the beginning of each root view template function for a component. That `projectionDef` points to a constant pool expression, which contains *parsed* selectors for all `<ng-content>` elements in the root's entire view tree.
3. A `projection` instruction for each `<ng-content>` slot in the view tree. These each get a data slot, a monotonically increasing "content slot", and a pointer to the tag's attributes in the component const array.
We support the first two features entirely within a new compilation phase.
The third feature, collection of processed attributes, is a bit trickier. We now treat `<ng-content>` tags as element-like ops, and use the normal attribute ingestion pipeline to process any attributes, and assign the appropriate `ConstIndex`.
**Note**: We also split up a number of the tests into two expectations files, one for the view functions, and one for other const listerals from the constant pool. This is because `TemplateDefinitionBuilder` emits the literals in a quirky order (mixed in with the view functions) due to how it lazily generates view functions. Our eager ordering is totally different, but by splitting the expectations, we can still share the same tests with `TemplateDefinitionBuilder`.
PR Close#51544
Today in local compilation mode the NgModule bootstrap definition is moved as it is into the runtime `ɵɵdefineNgModule`. This runtime was initially made for AoT full compilation mode and assumes that the bootstrap info is already flattened and resolved. This is not the case in local compilation where the bootstrap is the raw expression coming from the NgModule decorator and can be a nested array. To get around this problem we move the bootstrap along with other scope info (e.g., declarations, imports, exports) to the runtime`ɵɵsetNgModuleScope` to be further analyzed and flattened in runtime.
PR Close#51767
Based on top of #51717
This commit adds extraction for enums, pipes, and NgModules. It also adds a couple of tests for JsDoc extraction that weren't covered in the previous commit.
PR Close#51733
Based on top of #51713
This commit adds docs extraction for information provided in JsDoc comments, including descriptions and Jsdoc tags.
PR Close#51733
Based on top of #51697
Adds extraction for accessors (getters/setters), rest params, and resolved type info for everything so far. This also refactors function extraction into a new class and splits tests for common class info and directive info into separate files.
PR Close#51733
Based on top of #51685
This expands on the extraction with information for directives, including inputs and outputs. As part of this change, I've refactored the extraction code related to class and to directives into their own extractor classes to more cleanly separate extraction logic based on type of statement.
PR Close#51733
Based on top of #51682
This expands on the skeleton previously added to extract docs info for classes, including properties, methods, and method parameters. Type information and Angular-specific info (e.g. inputs) will come in future PRs.
PR Close#51733
This commit adds a barebones skeleton for extracting information to be used for extracting info that can be used for API reference generation. Subsequent PRs will expand on this with increasingly real extraction. I started with @alxhub's #51615 and very slightly polished to get to this minimal commit.
PR Close#51733
Another try at deflaking the tests on Windows. I'm trying a couple of fixes here:
1. I noticed that it's usually the indexer tests that fail during flaky runs. These tests also happen to be the only ones that don't pass in the `files` argument of `NgtscTestEnvironment.setup`. When `files` isn't passed in, we don't hit the file path that sets up the `MockFileSystem`. With these changes I make it so that we always initialize the mock file system.
2. The missing file system error usually comes from the `absoluteFrom` call that initializes the optional `workingDir` argument. My theory is that because it's a default value for an argument, it gets called too early before everything is initialized. These changes move the `absoluteFrom` call further down until it's needed.
PR Close#51804
The `verifyPlaceholdersIntegrity` check in the compliance tests was basically a noop, because it was returning false inside a `forEach` callback. Fixing it revealed that it had fallen out of date, because one of the regexes it uses was incorrect. The problem is that it assumed the placeholder keys would always be string literals, however it's possible that they're identifiers. These changes resolve the issue by not looking at the keys at all since we don't do anything with them.
PR Close#51751
Adds support for passing in `@Component.styles` as a string. Also introduces a new `styleUrl` property on `@Component` for providing a single stylesheet. This is more convenient for the most common case where a component only has one stylesheet associated with it.
PR Close#51715
Currently internally Angular has some customized tsconfig files, because we don't align with the tsconfig of the rest of g3. These changes enable `noImplicitReturns` and `noPropertyAccessFromIndexSignature` to align better with the internal config.
PR Close#51728
Reworks the pure functions to use arrow functions with an implicit return instead of function expressions. This allows us to shave off some bytes for each pure function, because we can avoid some of the syntax.
PR Close#51668
These changes build on top of #51514 to add support for advanced expressions inside the `track` parameter of `for` loop blocks. There are two different outputs that the compiler can generate:
1. If the tracking function only references the item or `$index`, the compiler generates a pure arrow function as a constant references in the `repeaterCreate` instruction.
2. If the tracking function has references to properties outside of the `for` loop block, the compiler will rewrite those references to go through `this` and generate a function declaration. The runtime will `bind` the declaration to the current component instance so that the rewritten `this` references are resolved correctly.
Advanced tracking expression come with the following limitations to ensure the best possible performance:
1. They can only reference the item, `$index` and properties directly on the component instance. This means that there'll be an error when accessing this like local template variables and references. While we could get this to work, we would have to traverse the context tree at runtime which will degrade the performance of the loop, because it's a linear time operation that is performed on each comparison. Furthermore, allowing local references would require us re-evaluate the list when any one of them has changed.
2. Pipes aren't allowed inside the tracking function.
3. Object literals and pipes used inside the tracking expression will be recreated on each invocation.
PR Close#51618
Adds type checking for the contents of `if`, `switch` and `for` blocks.
**Note:** this is just an initial implementation to get some basic type checking working and to figure out the testing setup. We'll need special TCB structures for this syntax so that we can support type narrowing.
PR Close#51570
With the new control flow and defer blocks it'll be common for several template instructions to be declare one after another. These changes add support for chaining to the `template` instruction which will allow us to save some bytes.
PR Close#51546
Adds the initial implementation to generate the instructions for the `for` loop block.
**Note:** the expressions we support in the `track` paramateter are currently limited to tracking by identity or index, or a specific property of the item. Supporting more advanced expression will require additional work that I'll do in a follow-up PR.
PR Close#51514
`switch` blocks are part of the new control flow syntax. This commit adds support for processing them, and emitting the appropriate templates and conditional instructions.
PR Close#51518
`syntheticHostListener` and `listener` have ordering dependencies. We reuse the existing ordering phase, and generalize it to also order create mode instructions.
PR Close#51498
Animation listeners on host bindings result in a special `syntheticHostListener` instruction. We can now emit this instruction.
Additionally, the naming phase for events has been slightly refactored to smoothly incorporate whether the event is from a host listener, as well as whether it is an animation listener.
PR Close#51498
For host bindings, `TemplateDefinitionBuilder` seems to use a different binding ordering, in which style bindings come after all the property bindings. We approximate that by treating `hostProperty` differently from `property` in the ordering phase.
PR Close#51498
The template pipeline is already capable of parsing and processing class and style attributes on templates. We now extend that functionality to host bindings.
The parser, for some reason, splits out class and style attributes into a `specialAttributes` field. We merge them back into the main attributes map, and allow the template pipeline to process them normally.
PR Close#51498
TemplateDefinitionBuilder only extracts host attributes if they are text attributes. For example, `[attr.foo]="'my-value'"` is not extracted despite being a string literal, because it is not a text attribute.
PR Close#51498
Host property bindings can be animation bindings, and should be ingested and emitted as such, as well as being processed by the renaming phase.
PR Close#51498
Host bindings can apply static attributes. These will be extracted to a `hostAttrs` field on the host binding function's metadata.
In order to achieve this, we add an `attributes` field to the host binding job. Then, we peform attribute exraction on host bindings. We finally populate the `attributes` field directly, instead of relying on a `consts` array.
PR Close#51498
Adds i18n block start & end ops, as well as a new phase to construct the
i18n message variable to be added to the consts array.
Co-authored-by: Alex Rickabaugh <alx+alxhub@alxandria.net>
Co-authored-by: Dylan Hunn <dylhunn@gmail.com>
PR Close#51353
This commit adds an initial implementation of the `{#defer}` block runtime, which supports the `when` conditions. More conditions and basic prefetching support will be added in followup PRs.
PR Close#51347
Adds the logic to generate the instructions for `if` blocks. There are two primary use cases we need to account for:
A conditional that doesn't use the `as` parameter of the `if` block. To support it we generate a nested ternary expression that evaluates to the index of the template whose condition is truthy. If the block doesn't have an `else` branch, we pass in a special `-1` value which means that no view will be rendered.
Example with an `else`:
```ts
// {#if expr}
// ...
// {:else if otherExpr} ...
// {:else} ...
// {/if}
if (rf & 1) {
ɵɵtemplate(0, App_Conditional_0_Template, 0, 0);
ɵɵtemplate(1, App_Conditional_1_Template, 0, 0);
ɵɵtemplate(2, App_Conditional_2_Template, 0, 0);
}
if (rf & 2) {
ɵɵconditional(0, ctx.expr ? 0 : ctx.otherExpr ? 1 : 2);
}
```
Example without an `else`:
```ts
// {#if expr}
// ...
// {:else if otherExpr} ...
// {/if}
if (rf & 1) {
ɵɵtemplate(0, App_Conditional_0_Template, 0, 0);
ɵɵtemplate(1, App_Conditional_1_Template, 0, 0);
}
if (rf & 2) {
ɵɵconditional(0, ctx.expr ? 0 : ctx.otherExpr ? 1 : -1);
}
```
If a conditional captures it's value in an alias (e.g. `{#if expr; as foo}`) we need to assign the value to a temporary variable before passing it along to `conditional`.
```ts
// {#if expr; as alias}...{/if}
if (rf & 1) {
ɵɵtemplate(0, App_Conditional_0_Template, 1, 0);
}
if (rf & 2) {
let App_contFlowTmp;
ɵɵconditional(0, (App_contFlowTmp = ctx.expr) ? 0 : -1, App_contFlowTmp);
}
```
PR Close#51380
Angular 16.1 introduced the input transform feature, requiring the partial compilation output to be extended
with a reference to the input transform function. This has resulted in a subtle breaking change, where older
versions of the Angular linker can no longer consume libraries that have started to use this feature.
We do try to support using a 16.1 library from an Angular 16.0 application, but if a library actually
adopts a new feature then this is no longer possible. In such cases, it is desirable to report a message
telling the user that their version of the Angular compiler is too old, as determined by the `"minVersion"`
property that is present in each partial declaration. This version would still indicate that the declaration
required at least Angular 14.0 to be compiled, but this is not accurate once input transforms are being
used. Consequently, this error would not be reported, causing a less informative error once the input transform
was being observed.
Fixes#51411
PR Close#51413
In local compilation mode it is not possible to use an imported string for component's template or styles as it cannot be resolved statically in compile time. There are some such use cases in g3 and potentially devs might incorporate such pattern. At the moment such pattern will cause the local compilation fail with generic error messages (e.g., so and so at position 1 is not a reference, etc). This change makes specific error messages with helpful hints for such cases. These new error messages can help devs to quickly resolve the issue as well as make it possible to identify existing issues in g3.
PR Close#51338
`tsickle` is not used in any code paths in 3P and we can remove
this complexity. The `tsickle` npm package has not been released
in a while and we are risking breakages with e.g. future TypeScript
versions.
Note that the `ng_module` rule was updated to not emit through
tsickle at all. The tsickle in 1P is done directly by `tsc_wrapped`
and our code path in `compiler-cli` is not needed at all.
PR Close#50602
This commit updates TestBed to wait for async component metadata resolution before compiling components.
Async metadata is added by the compiler in case a component uses defer blocks, which contain deferrable
symbols.
PR Close#51182
This commit updates compiler logic to generate the `setClassMetadataAsync` calls for components that used defer blocks. The `setClassMetadataAsync` function loads deferrable dependencies and invokes the `setClassMetadata` synchronously once everything is loaded. This change is needed to avoid eager references to deferrable symbols in component metadata in generated code.
PR Close#51182
Fixes that we weren't processing `when` conditions correctly which led to a compilation error when a pipe is used inside the expression.
PR Close#51368
A factory generator function called "i0.ɵɵgetComponentDepsFactory" is added to generate a factory function for component dependencies. This function will use the deps tracker to calculate the component's dependencies.
For standalone components the component imports (if exists) will be passed to this function. Alternatively this function can grab the imports directly from the decorate, but such extraaction needs some runtime logic which overlapps with what the trait compiler is doing. So better to pass the imports directly to this function at compile time.
PR Close#51089
In local mode the compiler combines the raw imports and exports and pass them to the injector definition as the imports field. It is not possible to filter out ng modules at compile time though, and it will be done in runtime.
Unit tests also added, and since that was the first time adding tests for local compilation some tweaks had to be made in order to disable diagnostics in local compilation mode in order for tests to run (such situation is also the case in real compilation where we ignore all teh diagnostics basically)
PR Close#51089
This commit updates the logic to drop regular imports when all symbols that it brings can be defer-loaded.
The change ensures that there is no mix of regular and dynamic imports present in a source file.
PR Close#51171
Updates the template pipeline's temporary variables phase to reuse
temporary variables within an expression. The algorithm implemented here
reuses variables more aggressively than TemplateDefinitionBuilder. This
change in behavior is acceptable, as it is unlikely to cause any
failures, and implementing the exact behavior observed in
TemplateDefinitionBuilder would be difficult.
PR Close#51100
In some cases it is not feasible to have the template pipeline produce
the exact same compiled output as the TemplateDefinitionBuilder. This
commit adds support to the testing infrastructure to have different
expected output files for each. This option should be used sparingly, as
we want the output to be as close as possible.
PR Close#51100
Updates the TemplateDefinitionBuilder class to generate the `defer` instruction for `{#defer}` blocks. Also generates dependency function that would be invoked at runtime (with dynamic imports inside).
PR Close#51162
Host property bindings beginning with `attr.` should have `Attribute` binding kind, and result in an `attribute` instruction.
This should really be handled in the parser in the future.
PR Close#51188
Templates may contain special `svg` and `math` elements, as well as logical descendants of those elements (e.g. `svg` may contain `g`). These will be parsed with a special colon-prefixed *namespace identifier*, such as `:svg:svg`, or `:svg:g`, or `:math:infinity`.
The template pipeline now considers these namespace prefixes, and stores them specially on the Element and Template data structures, ultimately generating the appropriate runtime instructions to change namespaces when needed.
PR Close#51188
When a container-like element has the `ngNonBindable` special attribute, bindings are disabled for it and its descendants. This requires emitting the `disableBindings` and `enableBindings` instructions when nested content exists.
PR Close#51188
Interestingly, host bindings are parsed quite differently from template functions. For example, bindings such as `[style.foo]: 3px` would be parsed into a value, unit, and type when bound to a template, but will not be parsed as such when used in a host binding.
In this commit, we remedy this shortcoming by adding support for bindings in host binding functions to the template pipeline. In particular, we create a phase to process these bindings, and transform them into the correct output binding kind.
Additionally, we fix some other minor bugs and omissions.
Finally, we enable compilation of host bindings with the template pipeline, which requires us to turn off a number of failing tests.
PR Close#50899
Begin producing source maps for the template pipeline, for a couple fundamental kinds of instructions, including elements, templates, properties, text, and interpolations.
PR Close#50899
Previously, `$event` was interpreted as a lexical read on the enclosing context. Now, a new pass converts such reads into simple output AST reads of `$event`, so they are not processed by the context resolution or naming phases. Additionally, the same pass sets a field on the enclosing listener op, so that the reify phase does not have to search for reads of `$event`.
PR Close#50899
`$any(...)` casts should be dropped, except when they are an explicit call on `this.$any(...)`. Fix a bug in which we were transforming `ThisReceiver` into an implicit receiver.
PR Close#50899
Ensures that all property and attribute ops are ordered consistently
regardless of the order they appear in the template. This ensures
correct precedence (e.g. `[style.color]="'#000'"` awlays wins out over
`[style]="{color: '#fff'}"`)
PR Close#50805
An internal compiler option named `supportJitMode` is now available for use by the Angular CLI.
This option currently controls the emit of NgModule selector scope information. This emitted
information is only needed in AOT mode when an application also uses JIT. However, AOT mode
combined with JIT mode is not currently supported nor will work in the Angular CLI. With
the Angular CLI, JIT mode is only supported if the entire application is built in JIT mode.
Without this option, the CLI needs to manually perform a code transform to remove the information
and also replicate TypeScript's import eliding. This is can be a complicated operation and must
be continually kept up to date with any changes to both the Angular compiler and TypeScript.
The introduction of this new option alleviates these concerns while also removing several build
time actions that would otherwise need to be performed on every application build.
PR Close#51007
This commit adds the ability to generate attribute instructions as a result of property bindings such as `[attr.foo]='bar'` or `attr.foo='{{bar}}'`. "Singleton" interpolations, such as the previous example, will also be transformed into a simple `attribute` instruction.
PR Close#50818
The option 'local compile' is added for the test cases, and the locally compiled file for an input `abc.ts` is compared by default with the file `abc.local.js`. This allows to use the same input `abc.ts` for both full compilation (compared with `abc.js`) and local compilation (compared with `abc.local.js`). An example is provided in the next commit when compliance tests are added for the NgModule local compilation.
PR Close#50577
The expression `a()?.b` should expand into `(tmp = a()) === null ? null : tmp.b`, in order to avoid calling the function `a()` twice.
This commit modifies the null-safe-expansion algorithm to emit temporary assignments, and provides the reification code to actually generate the declarations, assignments, and reads.
Note also that, with our bottom-up algorithm, there are some tricky cases when a function call exists inside an indexed access, such as `f1()?.[f2()?.a]?.b`. We add some special logic to avoid generating a double-assignment to the temporary storing the result of `f2()`.
Finally, there are opportunities to reuse the same temporary in expressions like `a?.[f()]?.[f()]`. We save this for the next commit.
PR Close#50688
An internal compiler option named `supportTestBed` is now available for use by the
Angular CLI. This option currently controls the extraction and emit of Angular class
metadata. This emitted information is only needed in AOT mode when using certain
TestBed APIs. However, AOT mode is currently not available for unit testing within
the Angular CLI. As a result, the metadata is not used within CLI generation applications
and in particular production applications. Without this option, the CLI needs to
manually perform a code transform to remove the metadata and also replicate TypeScript's
import eliding. This is can be a complicated operation and must be continually kept
up to date with any changes to both the Angular compiler and TypeScript. The introduction
of this new option alleviates these concerns.
PR Close#50604
A larger investigation on why this is flaky is needed. Currently the
test is flaky with around 77% sucess rate and negatively impacts team
productivity. Subjectively, as reported by team members this it's much
more flaky than a success rate of 77%.
PR Close#50718
If a library is compiling with Angular v16.1.0, the library will break
for users that are still on Angular v16.0.x. This happens because the
`DirectiveDeclaration` or `ComponentDeclaration` types are not expecting
an extra field for `signals` metadata. This field was only added to the
generic types in `16.1.0`- so compilations fail with errors like this:
```
Error: node_modules/@angular/material/icon/index.d.ts:204:18 -
error TS2707: Generic type 'ɵɵComponentDeclaration' requires between 7 and 9 type arguments.
```
To fix this, we quickly roll back the code for inserting this metadata
field. That way, libraries remain compatible with all v16.x framework
versions.
We continue to include the `signals` metadata if `signals: true` is set.
This is not public API anyway right now- so cannot happen- but imagine
we expose some signal APIs in e.g. 16.2.x, then we'd need this metadata
and can reasonably expect signal-component library users to use a more
recent framework core version.
PR Close#50714
Angular's null-safe access operators differ from Javascript's built-in semantics, in that they short-circuit to `null` instead of `undefined`. This necessitates providing a custom transformation, instead of relying on Typescript or Javascript itseld.
The old TemplateDefinitionBuilder uses a top-down approach based on the Visitor pattern, in which it recursively extracts the left-most safe access, and hoists it to a null check at the top. See `expression_converter.ts` for details.
In this commit, we replace that approach with a new bottom-up algorithm, as part of the template pipeline. This requires an intermediate expression type to represent the not-yet-expanded ternary operators, and is split into its own pass.
Null-safe function calls are not yet implemented, since they will rely on a future temporary variable allocation pass.
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
PR Close#50594
Refactor attribute and property binding ingestion and add an attribute extraction phase
Co-authored-by: Alex Rickabaugh <alxhub@users.noreply.github.com>
Co-authored-by: Dylan Hunn <dylhunn@users.noreply.github.com>
Only add the value to the ElementAttributes map for style and attribute kinds
Other kinds should not have their value represented in the consts array
Add missing attribute ingesiton for templates
Unify how template and element bindings are ingested
This resolves the issue of missing listener attributes on templates. In
order to avoid emitting extraneous instructions, listener ops on
templates are stripped in the attribute extraction phase instead.
Handle different binding types separately in ingest
Cleanup code and comments
Disable test that fails on new explicit error.
Previously the test was passing because ingestPropertyBinding treated
attribute bindings as normal bindings which happened to be ok for the
particular test. Now there's an explicit error that attrbiute bindings
aren't yet handled which causes the test to fail
Address feeback
PR Close#50664
Add a flag to disable specific tests when testing the template pipeline
Mark the currently failing tests
Add the template pipeline tests to CI
Update package.json
Co-authored-by: Paul Gschwendtner <paulgschwendtner@gmail.com>
PR Close#50582
According to the HTML specification most attributes are defined as strings, however some can be interpreted as different types like booleans or numbers. [In the HTML standard](https://html.spec.whatwg.org/multipage/common-microsyntaxes.html#boolean-attributes), boolean attributes are considered `true` if they are present on a DOM node and `false` if they are omitted. Common examples of boolean attributes are `disabled` on interactive elements like `<button>` or `checked` on `<input type="checkbox">`. Another example of an attribute that is defined as a string, but interpreted as a different type is the `value` attribute of `<input type="number">` which logs a warning and ignores the value if it can't be parsed as a number.
Historically, authoring Angular inputs that match the native behavior in a type-safe way has been difficult for developers, because Angular interprets all static attributes as strings. While some recent TypeScript versions made this easier by allowing setters and getters to have different types, supporting this pattern still requires a lot of boilerplate and additional properties to be declared. For example, currently developers have to write something like this to have a `disabled` input that behaves like the native one:
```typescript
import {Directive, Input} from '@angular/core';
@Directive({selector: 'mat-checkbox'})
export class MatCheckbox {
@Input()
get disabled() {
return this._disabled;
}
set disabled(value: any) {
this._disabled = typeof value === 'boolean' ? value : (value != null && value !== 'false');
}
private _disabled = false;
}
```
This feature aims to address the issue by introducing a `transform` property on inputs. If an input has a `transform` function, any values set through the template will be passed through the function before being assigned to the directive instance. The example from above can be rewritten to the following:
```typescript
import {Directive, Input, booleanAttribute} from '@angular/core';
@Directive({selector: 'mat-checkbox'})
export class MatCheckbox {
@Input({transform: booleanAttribute}) disabled: boolean = false;
}
```
These changes also add the `booleanAttribute` and `numberAttribute` utilities to `@angular/core` since they're common enough to be useful for most projects.
Fixes#8968.
Fixes#14761.
PR Close#50420
Adds the necessary compiler changes to support input transform functions. The compiler output has changed in the following ways:
### Directive handler
The directive handler now extracts a reference to the input transform function and it resolves the type of its first parameter. It also asserts that the type can be referenced in the compiled output and that it doesn't clash with any pre-existing `ngAcceptInputType_` members.
### .d.ts
In the generated declaration files the compiler now inserts an `ngAcceptInputType_` member for each input with a `transform` function. The member's type corresponds to the type of the first parameter of the function, e.g.
```typescript
// foo.directive.ts
@Directive()
export class Foo {
@Input({transform: (incomingValue: string) => parseInt(incomingValue)}) value: number;
}
// foo.directive.d.ts
export class Foo {
value: number;
static ngAcceptInputType_value: string;
}
```
### Type check block
If an input has `transform` function, the TCB will use the type of its first parameter for the setter type. This uses the same infrastructure as the `ngAcceptInputType_` members.
### Directive declaration
The generated runtime directive declaration call now includes the `transform` function in the `inputs` map, if the input is being transformed. The function will be picked up by the runtime in the next commit to do the actual transformation.
```typescript
// foo.directive.ts
@Directive()
export class Foo {
@Input({transform: (incomingValue: string) => parseInt(incomingValue)}) value: number;
}
// foo.directive.js
export class Foo {
ɵdir = ɵɵdefineDirective({
inputs: {
value: ['value', 'value', incomingValue => parseInt(incomingValue)]
}
});
}
```
PR Close#50225
Fixes that the host directives feature was incorrectly throwing the conflicting alias error when an aliased binding was being exposed under the same alias.
Fixes#48951.
PR Close#50364
This commit adds the `signals: boolean` property to the internal
directive/component metadata. This does not add it to the public API
yet, as the feature has no internal support other than compiler
detection.
PR Close#49981
NgModules which import standalone components currently list those components
in their injector definitions, because we assume that any standalone
component may export providers from its own imports.
This commit adds an optimization for that emit, which attempts to statically
analyze the NgModule imports and determine which standalone components, if
any are present, do not export providers and thus can be omitted.
This analysis is imperfect, because some imported components may be declared
outside of the current compilation, or transitively import types which are
declared outside the compilation. These types are therefore _assumed_ to
carry providers and so the optimization isn't applied to them.
PR Close#49837
The compiler currently does not check to make sure that directives in
the host bindings are exported. These directives are part of the public
API of the component so they do have to be.
PR Close#49527
Adds support for marking a directive input as required. During template type checking, the compiler will verify that all required inputs have been specified and will raise a diagnostic if one or more are missing. Some specifics:
* Inputs are marked as required by passing an object literal with a `required: true` property to the `Input` decorator or into the `inputs` array.
* Required inputs imply that the directive can't work without them. This is why there's a new check that enforces that all required inputs of a host directive are exposed on the host.
* Required input diagnostics are reported through the `OutOfBandDiagnosticRecorder`, rather than generating a new structure in the TCB, because it allows us to provide a better error message.
* Currently required inputs are only supported during AOT compilation, because knowing which bindings are present during JIT can be tricky and may lead to increased bundle sizes.
Fixes#37706.
PR Close#49468
This reverts commit 13dd614cd1.
This breaks a g3 Typescript compilation tests where diagnostics are
expected for a missing input in the component.
PR Close#49467
Adds support for marking a directive input as required. During template type checking, the compiler will verify that all required inputs have been specified and will raise a diagnostic if one or more are missing. Some specifics:
* Inputs are marked as required by passing an object literal with a `required: true` property to the `Input` decorator or into the `inputs` array.
* Required inputs imply that the directive can't work without them. This is why there's a new check that enforces that all required inputs of a host directive are exposed on the host.
* Required input diagnostics are reported through the `OutOfBandDiagnosticRecorder`, rather than generating a new structure in the TCB, because it allows us to provide a better error message.
* Currently required inputs are only supported during AOT compilation, because knowing which bindings are present during JIT can be tricky and may lead to increased bundle sizes.
Fixes#37706.
PR Close#49453
This reverts commit 1a6ca68154.
This breaks tests in google3 which might be depending on private APIs. We
need to update these tests before we can land this PR.
PR Close#49449
Adds support for marking a directive input as required. During template type checking, the compiler will verify that all required inputs have been specified and will raise a diagnostic if one or more are missing. Some specifics:
* Inputs are marked as required by passing an object literal with a `required: true` property to the `Input` decorator or into the `inputs` array.
* Required inputs imply that the directive can't work without them. This is why there's a new check that enforces that all required inputs of a host directive are exposed on the host.
* Required input diagnostics are reported through the `OutOfBandDiagnosticRecorder`, rather than generating a new structure in the TCB, because it allows us to provide a better error message.
* Currently required inputs are only supported during AOT compilation, because knowing which bindings are present during JIT can be tricky and may lead to increased bundle sizes.
Fixes#37706.
PR Close#49304
The decorator downlevel transform is never used for actual class
decorators because Angular class decorators rely on immediate execution
for JIT. Initially we also supported downleveling of class decorators
for View Engine library output, but libraries are shipped using partial
compilation output and are not using this transform anymore.
The transform is exclusively used for JIT processing, commonly for
test files to help ease temporal dead-zone/forward-ref issues. We can
remove the class decorator downlevel logic to remove technical debt.
PR Close#49351
Consider the following scenario:
1. A TS file with a component and templateUrl exists
2. The template file does not exist.
3. First build: ngtsc will properly report the error, via a FatalDiagnosticError
4. The template file is now created
5. Second build: ngtsc still reports the same errror.
ngtsc persists the analysis data of the component and never invalidates
it when the template/style file becomes available later.
This breaks incremental builds and potentially common workflows
where resource files are added later after the TS file is created. This
did surface as an issue in the Angular CLI yet because Webpack requires
users to re-start the process when a new file is added. With ESBuild
this will change and this also breaks incremental builds with
Bazel/Blaze workers.
To fix this, we have a few options:
* Invalidate the analysis when e.g. the template file is missing. Never
caching it means that it will be re-analyzed on every build iteration.
* Add the resource dependency to ngtsc's incremental file graph. ngtsc
will then know via `host.getModifiedResources` when the file becomes
available- and fresh analysis of component would occur.
The first approach is straightforward to implement and was chosen here.
The second approach would allow ngtsc to re-use more of the analysis
when we know that e.g. the template file still not there, but it
increases complexity unnecessarily because there is no **single**
obvious resource path for e.g. a `templateUrl`. The URL is attempted
to be resolved using multiple strategies, such as TS program root dirs,
or there is support for a custom resolution through
`host.resourceNameToFileName`.
It would be possible to determine some candidate paths and add them to
the dependency tracker, but it seems incomplete given possible external
resolvers like `resourceNameToFileName` and also would likely not have
a sufficient-enough impact given that a broken component decorator is
not expected to remain for too long between N incremental build
iterations.
PR Close#49184
The options to generate NgFactory and NgSummary files were added to Ivy for backwards compatibility with ViewEngine. Since ViewEngine was deprecated and removed, the NgFactory and NgSummary files are no longer used as well.
This commit drops obsolete options to generate NgFactory and NgSummary files. Also, the logic that generates those files is also removed.
PR Close#48268
Fixes that the expression converter was producing code that throws a runtime error if a non-null assertion is used as a part of a safe read, write or call.
Fixes#48742.
PR Close#48801
Reworks some of the existing compiler APIs to make them easier to use in a schematic and exposes a few new ones to surface information we already had. High-level list of changes:
* `getPotentialImportsFor` now requires a class reference, instead of a `PotentialDirective | PotentialPipe`.
* New `getNgModuleMetadata` method has been added to the type checker.
* New `getPipeMetadata` method has been added to the type checker.
* New `getUsedDirectives` method has been added to the type checker.
* New `getUsedPipes` method has been added to the type checker.
* The `decorator` property was exposed on the `TypeCheckableDirectiveMeta`. The property was already present at runtime, but it wasn't specified on the interface.
PR Close#48730
In #47167 an `updateClassDeclaration` call was swapped out with a `createClassDeclaration` which caused a regression where interface references were being retained when using a custom decorator in a project that has `emitDecoratorMetadata` enabled.
These changes switch back to use `updateClassDeclaration`.
Fixes#48448.
PR Close#48638
Allows for self-closing tags to be used for non-native tag names, e.g. `<foo [input]="bar"></foo>` can now be written as `<foo [input]="bar"/>`. Native tag names still have to have closing tags.
Fixes#39525.
PR Close#48535
This is basically a pre-step for combining devmode and prodmode into a
single compilation. We are already achieving this now, and can claim
with confidence that we reduced possible actions by half. This is
especially important now that prodmode is used more often, but rules
potentially still using the devmode ESM sources. We can avoid double
compilations (which existed before the whole ESM migration too!).
We will measure this more when we have more concrete documentation
of the changes & a better planning document.
Changes:
* ts_library will no longer generate devmode `d.ts`. Definitions are
generated as part of prodmode. That way only prodmode can be exposed
via providers.
* applied the same to `ng_module`.
* updates migrations to bundle because *everything* using `ts_library`
is now ESM. This is actually also useful in the future if
schematics rely on e.g. the compiler.
* updates schematics for localize to also bundle. similar reason as
above.
PR Close#48521
Since the Bazel setup in this repo will now always use ESM,
the tooling scripts/binaries in AIO need to be switched to ESM
too. Most of the scripts are already ESM, but a few had to be converted.
Note that the Dgeni generation does not use ESM because it's unaffected
and the Dgeni CLI is used. In the future we could also update the Dgeni
setup to ESM but there is no need currently.
PR Close#48521
Since we generate a `.mjs` file as entry-point for jasmine tests,
a couple of issues prevented the transitive dependencies from
bootstrap targets to be brought in (causing resolution errors):
1. The `_files` (previously `_esm2015`) targets are no longer needed,
and they also miss all the information on runfiles.
2. The aspect for computing linker mappings does not respect the
`bootstrap` attribute from the `spec_entrypoint` so we manually
add the extract ESM output targets (this rule works with the aspect
and forwards linker mappings).
PR Close#48521
For every `ts_library` target we expose a shorthand that grants
access to the JS files because `DefaultInfo` of a ts library
only exposes the `.d.ts` files.
We rename this away from `es2015` since in practice it's a much
higher target these days. Additionally we no longer use the devmode
output but rather use the prodmode output which has the explicit
`.mjs` output- compatible with ESM.
PR Close#48521
For standalone components it may be beneficial to group multiple declarations
into a single array, that can then be imported all at once in `Component.imports`.
If this array is declared within a library, however, would the AOT compiler
need to extract the contents of the array from the declaration file. This
requires that the array is constructed using an `as const` cast, which results
in a readonly tuple declaration in the generated .d.ts file of the library:
```ts
export declare const DECLARATIONS: readonly [typeof StandaloneDir];
```
The partial evaluator logic did not support this syntax, so this pattern was
not functional when a library is involved. This commit adds the necessary
logic in the static interpreter to evaluate this type at compile time.
Closes#48089
PR Close#48091
Because the language service uses the compiler, we try to produce as
much useful information as possible rather than throwing hard errors.
Hard errors cause the compiler to crash. While this can be acceptable
when compiling a program as part of a regular build, this is undesirable
for the language service.
PR Close#48314
The stricter checks under `strictInjectionParameters` in Angular 15 now enforce that
an inherited constructor must be compatible with DI, based on whether all parameters
are valid injection tokens. There is an issue when the constructor is inherited from
a class in a declaration file though, as information on the usage of `@Inject()` is
not present within a declaration file. This means that this stricter check cannot be
accurately performed, resulting in false positives.
This commit disables the stricter check to behave the same as it did prior to
Angular 15, therefore avoiding the false positive.
Fixes#48152
PR Close#48156
`getPotentialPipes` returns possible pipes which can be used in the provided context, whether already in scope or requiring an import.
This is necessary to implement auto-import support for pipes in the language service.
PR Close#48090
This commit updates the logic related to the attribute and property binding rules for <iframe> elements. There is a set of <iframe> attributes that may affect the behavior of an iframe and this change enforces that these attributes are only applied as static attributes, making sure that they are taken into account while creating an <iframe>.
If Angular detects that some of the security-sensitive attributes are applied as an attribute or property binding, it throws an error message, which contains the name of an attribute that is causing the problem and the name of a Component where an iframe is located.
BREAKING CHANGE:
Existing iframe usages may have security-sensitive attributes applied as an attribute or property binding in a template or via host bindings in a directive. Such usages would require an update to ensure compliance with the new stricter rules around iframe bindings.
PR Close#47964
This reverts commit 2d08965b1a.
The reason for revert is that we've identified some issues with implementation. The issues will get addressed soon and the fix would be re-submitted.
PR Close#47959
This commit updates the logic related to the attribute order on iframes and makes the rules more strict. There is a set of iframe attributes that may affect the behavior of an iframe, this change enforces that these attributes are applied before an `src` or `srcdoc` attributes are applied to an iframe, so that they are taken into account.
If Angular detects that some of the attributes are set after the `src` or `srcdoc`, it throws an error message, which contains the name of ann attribute that is causing the problem and the name of a Component where an iframe is located. In most cases, it should be enough to change the order of attributes in a template to move the `src` or `srcdoc` ones to the very end.
BREAKING CHANGE:
Existing iframe usages may have `src` or `srcdoc` preceding other attributes. Such usages may need to be updated to ensure compliance with the new stricter rules around iframe bindings.
PR Close#47935
Implements more of the runtime validations for host directives as compiler diagnostics so that they can be caught earlier. Also does some minor cleanup.
PR Close#47768
In AOT compilations, the `strictInjectionParameters` compiler option can
be enabled to report errors when an `@Injectable` annotated class has a
constructor with parameters that do not provide an injection token, e.g.
only a primitive type or interface.
Since Ivy it's become required that any class with Angular behavior
(e.g. the `ngOnDestroy` lifecycle hook) is decorated using an Angular
decorator, which meant that `@Injectable()` may need to have been added
to abstract base classes. Doing so would then report an error if
`strictInjectionParameters` is enabled, if the abstract class has an
incompatible constructor for DI purposes. This may be fine though, as
a subclass may call the constructor explicitly without relying on
Angular's DI mechanism.
Therefore, this commit excludes abstract classes from the
`strictInjectionParameters` check. This avoids an error from being
reported at compile time. If the constructor ends up being used by
Angular's DI system at runtime, then the factory function of the
abstract class will throw an error by means of the `ɵɵinvalidFactory`
instruction.
In addition to the runtime error, this commit also analyzes the inheritance
chain of an injectable without a constructor to verify that their inherited
constructor is valid.
BREAKING CHANGE: Invalid constructors for DI may now report compilation errors
When a class inherits its constructor from a base class, the compiler may now
report an error when that constructor cannot be used for DI purposes. This may
either be because the base class is missing an Angular decorator such as
`@Injectable()` or `@Directive()`, or because the constructor contains parameters
which do not have an associated token (such as primitive types like `string`).
These situations used to behave unexpectedly at runtime, where the class may be
constructed without any of its constructor parameters, so this is now reported
as an error during compilation.
Any new errors that may be reported because of this change can be resolved either
by decorating the base class from which the constructor is inherited, or by adding
an explicit constructor to the class for which the error is reported.
Closes#37914
PR Close#44615
Previously when a file was being analyzed to determine if a shim should
be generated, up to two calls to the host `fileExists` function per file
per generator were made. In the default host, each `fileExists` call made
two underlying file system calls. Following these calls, the file was then
read via `getSourceFile`. However, `getSourceFile` will return `undefined`
if the requested file does not exist. As a result, `getSourceFile` can be
used directly to request both potential file names and leverage the return
value to determine if the file does not exist. This avoids the need to call
`fileExists` at all.
PR Close#47682
`getPotentialImportsFor` returns an array of possible imports, including TypeScript module specifier and identifier name, for a requested trait in the context of a given component.
PR Close#47631
`getPotentialTemplateDirectives` returns possible directives which can be used in the provided context, whether already in scope or requiring an import.
This is necessary to implement auto-import support for standalone components in the language service.
PR Close#47561
Using raw objects as a lookup structure will inadvertently find methods defined on
`Object`, where strings are expected. This causes errors downstream when string
operations are applied on functions.
This commit switches over to use `Map`s in the DOM element schema registry to fix
this category of issues.
Fixes#46936
PR Close#47220
This option has no longer any effect as Ivy is the only rendering engine.
BREAKING CHANGE: Angular compiler option `enableIvy` has been removed as Ivy is the only rendering engine.
PR Close#47346
