As outlined in the previous commit which enabled the `esModuleInterop`
TypeScript compiler option, we need to update all namespace imports
for `typescript` to default imports. This is needed to allow for
TypeScript to be imported at runtime from an ES module.
Similar changes are needed for modules like `semver` where the types incorrectly
suggest named exports that will not exist at runtime when imported from ESM.
This commit refactors all imports to match with the lint rule we have
configured in the previous commit. See the previous commit for more
details on why certain imports have been changed.
A special case are the imports to `@babel/core` and `@babel/types`. For
these a special interop is needed as both default imports, or named
imports break the other module format. e.g default imports would work
well for ESM, but it breaks for CJS. For CJS, the named imports would
only work, but in ESM, only the default export exist. We work around
this for now until the devmode is using ESM as well (which would be
consistent with prodmode and gives us more valuable test results). More
details on the interop can be found in the `babel_core.ts` files (two
interops are needed for both localize/or the compiler-cli).
PR Close#43431
Enables the `esModuleInterop` for all TypeScript compilations in the
project. This allows us to emit proper ESM-compatible code. e.g.
consider the following import:
```ts
import * as ts from 'typescript';
```
This import currently will break at runtime in NodeJS because the
`typescript` package is not shipping ESM. It's still a CommonJS module.
ES modules are able to import from `typescript` though, using an import
statement as above, but everything in `module.exports` is being exposed
as the `default` named export. TypeScript at runtime does not have any
other named exports, so for actual ESM compatibility, all of our imports
need to be switched to:
```
import ts from 'typescript';
```
The `esModuleInterop` option allows this to work even though the
`d.ts` file of TS currently suggests that there are _only_ named exports.
The TypeScript language service will now suggest the correct import form as
shown above. It doesn't enforce that unfortunately, but this commit also
adds a lint rule that enforces certain patterns so that we emit imports
that are compatible with both ESM and CJS output (CJS still needed here
since tests run with CJS devmode output still; this is a future project
to switch that over to ESM!)
PR Close#43431
This wires up the `@angular/localize/tools` entry-point. For context:
This entry-point is being created to avoid deep imports into
`@angular/localize/src/tools/<..>` like the CLI relies on. Deep imports
do not play well with strict ESM, and now that all APF packages are
strict ESM, the tool code needs to be either strict ESM as well.
We use ESBuild to create individual bundles for the CLI entry-points,
and the actual tool entry-point. We use a bundler because this enables
the localize code be ESM compatible. Without a bundler, all relative imports
within the `tools` entry-point would need to explicitly have the `.js`
extension. This would be cumbersome and hard to maintain/enforce or
validate.
One might wonder why this is not a standard APF entry-point then. The
answer is that the APF entry-points do not support exposing the CLI
binaries (like `yarn localize-translate`). This could be done through
tertiary entry-points, but using ESBuild directly gives us more control
for now. We might want to revisit this in the future again.
PR Close#43431
Similar to other code that is shipped as part of `@angular/common`
(with APF v13), we should ship the generated locale files as ESM
files as well. This is necessary/reasonable because we explicitly
set `type: "module"` for the common package, so it makes sense to
have the same apply for the locale sub-directory.
Note: The global locale scripts remain having the `.js` extension
and will continue to be unmodified. They are CJS/ESM compatible either
way, but refer to browser globals.
PR Close#43431
The bazel integration tests are currently not compatible with Windows.
Tests never get to run because the created tar packages for NPM packages
are built using an outdated `pkg_tar` rule that creates invalid
tarballs. We fix this by using the non-deprecated windows-compatible
`rules_pkg` implementation.
Additionally, we copy all `package.json` files of integration tests to
the bazel bin directory as otherwise the file would be accidentally
modified as a source on Windows.
PR Close#43431
Technically this change would not be needed as the NPM package
output is always built with Ivy now (using the transition). There
is no View Engine output anymore. We still want to limit the tests
to only run with the `--config=ivy` define setting as some API goldens
tests could accidentally rely on plain `ng_module` output / additionally
we wouldn't need to run the API golden tests multiple times.
PR Close#43431
For APF v13, terser has been updated to v5, and the prodmode output
has changed from ES2015 to ES2020. This results in some changes in
the symbol extractor test. Here are the two causes of changes:
* As said in the previous commit, Terser drops the initializer for
variables which are set to `undefined`. We have updated the symbol
extractor to always capture such declarations w/o initializer now.
This means that a couple of declarations that a couple of new
symbols are captured now. These previously didn't have an initializer
even without Terser, and just didn't show up before.
* Terser changed its inline mechanism for functions that recursively
call themselves. Such functions are no longer inlined and therefore
show up in goldens now.
PR Close#43431
Updates the symbol extractor test to work with Terser v5 that
drops the variable declaration initializer if it is explicitly set
to `undefined`. We want to capture such identifiers in the bundles
as otherwise the majority of top-level declarations which are intially
set to `undefined` would be hidden in size goldens.
PR Close#43431
With the changes to support APF v13 in the `ng_package` rule, we have
removed the ambiguous `entry_point` attribute. The attribute suggested
that it would be used for determining the primary entry-point input
file. This was not the case as the flat module output file is consulted
for bundling et at. The attribute has been renamed to match its
purposed (renamed to `primary_bundle_name`).
We no longer need to set that attribute because the primary bundle
name is (1) not of relevance for consumers and (2) the rule already
infers the bundle name properly from the Bazel package.
PR Close#43431
This commit implements partial compilation APF v13 for the
`ng_package` rule. The changes involve the following things:
1. Requesting the partial compilation output for all targets (and
its transitives) in the `deps` or `srcs` attributes.
2. Downleveling of ES2020 prodmode output to a FESM2015 file.
3. Cleanup of file resolution. Previusly, execroot file paths (which are
passed to the packager tool) were composed manually. This is prone to
mistakes and breaks with transitions.
A lot of this code can be simplified by passing the necessary Bazel
`File` information as JSON. This also simplifies the packager tool
significantly (and makes it more readable..)
4. Remoal of UMD bundles. This also allows us remove the `globals` rule
attribute with `externals` (we do not need any UMD global identifier
names anymore).
5. The `package.json` will set the `exports` field and use subpath
exports to make module resolution work for ESM consumers.
6. TSLib is also always set as `external` now. Previously it had to be
added as `dep` to the `ng_package` rule as UMD files bundled `tslib`.
7. The `include_devmode_srcs` option has been removed. This option was
an addition to APF that allowed the `@angular/compiler` to ship
non-flattened ES5 CommonJS sources. We want to keep APF consistent
and not allow such exceptions. Compiler is now a strict APF package
as well, and the compiler-cli just needs to go through the primary
entry-point for things it needs (or it bundles the necessary parts
into the CLI.)
Overall, these are all changes. A lot of changes to make the packager
rule and tool more readable and Bazel-idiomatic were made as well. This
allows us to easier make packaging changes in the future, and it's more
future-proof if we ever change how inputs (like `ng_module` targets) are
generated (e.g. consider a case where we'd use the `ts_project` rule).
PR Close#43431
Previously, the prodmode output was using ES2015 for `ng_module` and
`ts_library` targets. This commit changes it to `ES2020`. This is
necessary as we want to ship es2020 output in APF v13.
PR Close#43431
This is to replace the implicitly created ts_library_forwared rules and
keep changes related to tsec/bazel integration solely in tools/tsec.bzl.
PR Close#43108
Introduce two new bazel rules: tsec_test and tsec_config, for
describing the tsec checks and the tsconfig file needed for such
checks, respectively. Currently, tsec_test only checks the srcs
of a ts_library or ng_module. It does not check direct or transitive
dependencies. Also, tsconfig files need to be manually maintained
to make sure tsec can read all necessary input (including global
symbols).
PR Close#43108
This commit removes `ts-api-guardian` from the repository. We introduced
a new tool for testing API signature that is part of the shared
dev-infra package. The TS API guardian package will be deprecated for
the public in favor of Microsoft's API extractor that has support for
more parts of the syntax, such as alias exports.
PR Close#42735
Converts the CLDR locale extraction script to a Bazel tool.
This allows us to generate locale files within Bazel, so that
locales don't need to live as sources within the repo. Also
it allows us to get rid of the legacy Gulp tooling.
The migration of the Gulp script to a Bazel tool involved the
following things:
1. Basic conversion of the `extract.js` script to TypeScript.
This mostly was about adding explicit types. e.g. adding `locale:
string` or `localeData: CldrStatic`.
2. Split-up into separate files. Instead of keeping the large
`extract.js` file, the tool has been split into separate files.
The logic remains the same, just that code is more readable and
maintainable.
3. Introduction of a new `index.ts` file that is the entry-point
for the Bazel tool. Previously the Gulp tool just generated
all locale files, the default locale and base currency files
at once. The new entry-point accepts a mode to be passed as
first process argument. based on that argument, either locales
are generated into a specified directory, or the default locale,
base currencies or closure file is generated.
This allows us to generate files with a Bazel genrule where
we simply run the tool and specify the outputs. Note: It's
necessary to have multiple modes because files live in separate
locations. e.g. the default locale in `@angular/core`, but the
rest in `@angular/common`.
4. Removal of the `cldr-data-downloader` and custom CLDR resolution
logic. Within Bazel we cannot run a downloader using network.
We switch this to something more Bazel idiomatic with better
caching. For this a new repository rule is introduced that
downloads the CLDR JSON repository and extracts it. Within
that rule we determine the supported locales so that they
can be used to pre-declare outputs (for the locales) within
Bazel analysis phase. This allows us to add the generated locale
files to a `ts_library` (which we want to have for better testing,
and consistent JS transpilation).
Note that the removal of `cldr-data-downloader` also requires us to
add logic for detecting locales without data. The CLDR data
downloader overwrote the `availableLocales.json` file with a file
that only lists locales that CLDR provides data for. We use the
official `availableLocales` file CLDR provides, but filter out
locales for which no data is available. This is needed until we
update to CLDR 39 where data is available for all such locales
listed in `availableLocales.json`.
PR Close#42230
In combination with the TS `noImplicitOverride` compatibility changes,
we also want to follow the best-practice of adding `override` to
members which are implemented as part of abstract classes. This
commit fixes all instances which will be flagged as part of the
custom `no-implicit-override-abstract` TSLint rule.
PR Close#42512
TypeScript introduced a new flag called `noImplicitOverride` as part
of TypeScript v4.3. This flag introduces a new keyword called `override`
that can be applied to members which override declarations from a base
class. This helps with code health as TS will report an error if e.g.
the base class changes the method name but the override would still
have the old method name. Similarly, if the base class removes the method
completely, TS would complain that the memeber with `override` no longer
overrides any method.
A similar concept applies to abstract methods, with the exception that
TypeScript's builtin `noImplicitOverride` option does not flag members
which are implemented as part of an abstract class. We want to enforce
this as a best-practice in the repository as adding `override` to such
implemented members will cause TS to complain if an abstract member is
removed, but still implemented by derived classes.
More details: https://github.com/microsoft/TypeScript/issues/44457.
PR Close#42512
We accidentally started shipping `.mjs` files for the following
modules (or module paths) as of the v12.1.0-next.2 tag:
- `@angular/compiler-cli`
- `@angular/common/locales`
- `@angular/bazel`
- `@angular/benchpress`
- `@angular/core/schematics`
- `@angular/elements/schematics`
- `@angular/language-service`
- `@angular/localize/schematics`,
- `@angular/localize/tools`
- `zone.js`
This did not cause any issues for consumers but we
want to not ship these files without having them wired
up in `package.json` files. We accidentally started shipping
these `.mjs` files due to a NodeJS update which wired up the
other JavaScript module output flavors in the `pkg_npm` rule.
911529fd36
PR Close#42809
Updates the Bazel NodeJS rules to v4.0.0-beta.0. This is necessary
so that the Angular components repo can update, and it's generally
good to stay as up-to-date as possible with the Bazel rules as it's
easy to fall behind, and updating early allows us to discover issues
affecting our tooling earlier (where they are easier to address due to
e.g. potential breaking change policy).
PR Close#42760
Updates to TypeScript 4.3.4 which contains a fix for a printer
regression that caused unexpected JavaScript output with our
compiler transforms.
See: https://github.com/microsoft/TypeScript/pull/44070.
Updates to TypeScript 4.3.4 which contains a fix for a printer
PR Close#42600
Converts the CLDR locale extraction script to a Bazel tool.
This allows us to generate locale files within Bazel, so that
locales don't need to live as sources within the repo. Also
it allows us to get rid of the legacy Gulp tooling.
The migration of the Gulp script to a Bazel tool involved the
following things:
1. Basic conversion of the `extract.js` script to TypeScript.
This mostly was about adding explicit types. e.g. adding `locale:
string` or `localeData: CldrStatic`.
2. Split-up into separate files. Instead of keeping the large
`extract.js` file, the tool has been split into separate files.
The logic remains the same, just that code is more readable and
maintainable.
3. Introduction of a new `index.ts` file that is the entry-point
for the Bazel tool. Previously the Gulp tool just generated
all locale files, the default locale and base currency files
at once. The new entry-point accepts a mode to be passed as
first process argument. based on that argument, either locales
are generated into a specified directory, or the default locale,
base currencies or closure file is generated.
This allows us to generate files with a Bazel genrule where
we simply run the tool and specify the outputs. Note: It's
necessary to have multiple modes because files live in separate
locations. e.g. the default locale in `@angular/core`, but the
rest in `@angular/common`.
4. Removal of the `cldr-data-downloader` and custom CLDR resolution
logic. Within Bazel we cannot run a downloader using network.
We switch this to something more Bazel idiomatic with better
caching. For this a new repository rule is introduced that
downloads the CLDR JSON repository and extracts it. Within
that rule we determine the supported locales so that they
can be used to pre-declare outputs (for the locales) within
Bazel analysis phase. This allows us to add the generated locale
files to a `ts_library` (which we want to have for better testing,
and consistent JS transpilation).
Note that the removal of `cldr-data-downloader` also requires us to
add logic for detecting locales without data. The CLDR data
downloader overwrote the `availableLocales.json` file with a file
that only lists locales that CLDR provides data for. We use the
official `availableLocales` file CLDR provides, but filter out
locales for which no data is available. This is needed until we
update to CLDR 39 where data is available for all such locales
listed in `availableLocales.json`.
PR Close#42230
Converts the CLDR locale extraction script to a Bazel tool.
This allows us to generate locale files within Bazel, so that
locales don't need to live as sources within the repo. Also
it allows us to get rid of the legacy Gulp tooling.
The migration of the Gulp script to a Bazel tool involved the
following things:
1. Basic conversion of the `extract.js` script to TypeScript.
This mostly was about adding explicit types. e.g. adding `locale:
string` or `localeData: CldrStatic`.
2. Split-up into separate files. Instead of keeping the large
`extract.js` file, the tool has been split into separate files.
The logic remains the same, just that code is more readable and
maintainable.
3. Introduction of a new `index.ts` file that is the entry-point
for the Bazel tool. Previously the Gulp tool just generated
all locale files, the default locale and base currency files
at once. The new entry-point accepts a mode to be passed as
first process argument. based on that argument, either locales
are generated into a specified directory, or the default locale,
base currencies or closure file is generated.
This allows us to generate files with a Bazel genrule where
we simply run the tool and specify the outputs. Note: It's
necessary to have multiple modes because files live in separate
locations. e.g. the default locale in `@angular/core`, but the
rest in `@angular/common`.
4. Removal of the `cldr-data-downloader` and custom CLDR resolution
logic. Within Bazel we cannot run a downloader using network.
We switch this to something more Bazel idiomatic with better
caching. For this a new repository rule is introduced that
downloads the CLDR JSON repository and extracts it. Within
that rule we determine the supported locales so that they
can be used to pre-declare outputs (for the locales) within
Bazel analysis phase. This allows us to add the generated locale
files to a `ts_library` (which we want to have for better testing,
and consistent JS transpilation).
Note that the removal of `cldr-data-downloader` also requires us to
add logic for detecting locales without data. The CLDR data
downloader overwrote the `availableLocales.json` file with a file
that only lists locales that CLDR provides data for. We use the
official `availableLocales` file CLDR provides, but filter out
locales for which no data is available. This is needed until we
update to CLDR 39 where data is available for all such locales
listed in `availableLocales.json`.
PR Close#42230
Switches the repository to TypeScript 4.3 and the latest
version of tslib. This involves updating the peer dependency
ranges on `typescript` for the compiler CLI and for the Bazel
package. Tests for new TypeScript features have been added to
ensure compatibility with Angular's ngtsc compiler.
PR Close#42022
This change moves the `dev-infra/browsers` folder into `dev-infra/bazel`.
The browser folder is providing custom configuration for Bazel, so it
should live within the `bazel` folder for a more well-structured
`dev-infra` folder.
PR Close#42268
In version 12, applications will only be allowed to be built in Ivy, this makes the minified UMDs redundant since they cannot be processed by NGCC.
With this change, we remove the minified UMDs from the generated APF package.
BREAKING CHANGE: Minified UMD bundles are no longer included in the distributed NPM packages.
PR Close#41425
Updates to the latest version of `rules_nodejs` that supports
the most recent NodeJS lts version v14.16.1.
Additionally the latest version of `rules_nodejs` provides
[a package for runfile resolution](https://github.com/bazelbuild/rules_nodejs/pull/2568) w/ types that we can leverage.
PR Close#41599
With this change we update several dependencies to avoid Renovate creating a lot of PRs during onboarding. We also remove yarn workspaces as after further analysis these are not needed.
Certain dependencies such as `@octokit/rest`, `remark` and `@babel/*` have not been updated as they require a decent amount of work to update, and it's best to leave them for a seperate PR.
PR Close#41434
Rather than relying on a preinstall script, set `engine-strict` to `true` in a
project `.npmrc` file, relying on the `engines` having `npm` set to note that
yarn should be used instead.
---
Output from `npm install` changes from:
```
$ npm install
> angular-srcs@12.0.0-next.7 preinstall /usr/local/account/js/angular
> node tools/yarn/check-yarn.js
/usr/local/account/js/angular/tools/yarn/check-yarn.js:12
throw new Error(
^
Error: Please use Yarn instead of NPM to install dependencies. See: https://yarnpkg.com/lang/en/docs/install/
at Object.<anonymous> (/usr/local/account/js/angular/tools/yarn/check-yarn.js:12:9)
at Module._compile (internal/modules/cjs/loader.js:778:30)
at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
at Module.load (internal/modules/cjs/loader.js:653:32)
at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
at Function.Module._load (internal/modules/cjs/loader.js:585:3)
at Function.Module.runMain (internal/modules/cjs/loader.js:831:12)
at startup (internal/bootstrap/node.js:283:19)
at bootstrapNodeJSCore (internal/bootstrap/node.js:623:3)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! angular-srcs@12.0.0-next.7 preinstall: `node tools/yarn/check-yarn.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the angular-srcs@12.0.0-next.7 preinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_54_02_292Z-debug.log
```
to
```
$ npm install
npm ERR! code ENOTSUP
npm ERR! notsup Unsupported engine for angular-srcs@12.0.0-next.7: wanted: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"} (current: {"node":"10.20.1","npm":"6.14.4"})
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Not compatible with your version of node/npm: angular-srcs@12.0.0-next.7
npm ERR! notsup Required: {"node":">=10.19.0 <13.0.0","yarn":">=1.22.4 <2","npm":"Plesae use yarn instead of NPM to install dependencies"}
npm ERR! notsup Actual: {"npm":"6.14.4","node":"10.20.1"}
npm ERR! A complete log of this run can be found in:
npm ERR! /usr/local/account/.npm/_logs/2021-04-06T22_53_23_912Z-debug.log
```
PR Close#41477
A previous commit implemented a streamlined performance metric reporting
system for the compiler-cli, controlled via the compiler option
`tracePerformance`.
This commit adds a custom Bazel flag rule //packages/compiler-cli:ng_perf
to the repository, and wires it through to the `ng_module` implementation
such that if the flag is set, `ng_module` will produce perf results as part
of the build. The underlying mechanism of `//:ng_perf` is not exported from
`@angular/bazel` as a public rule that consumers can use, so there is little
risk of accidental dependency on the contents of these perf traces.
An alias is added so that `--ng_perf` is a Bazel flag which works in our
repository.
PR Close#41125
The `yarn symbol-extractor:check` and `yarn symbol-extractor:update` commands don't seem to work currently -
the script is unable to calculate the list of relevant targets. Running the `bazel query ...` command used in the
script fails due to the missing quotes around the query argument. This commit fixes the problem by updating the
script to wrap query argument into single quotes.
PR Close#40163
Remove the check-env script as it is not longer relied on and only surfaces
false positives/known mismatches at this point.
Since our tooling now acts using vendored code where needed, this is no
longer as necessary as it previously was.
PR Close#39980
Migrate the rebase-pr script used on CI out of tools and into the circleci
directory. Additionally removes its support for running in the local
repository as this is now better handled by `ng-dev pr rebase <pr-number>`.
PR Close#39592
`zone.js` 0.8.25 introduces `zone-testing` bundle and move all `fakeAsync/async` logic
from `@angular/core/testing` to `zone.js` package. But in case some user still using the old
version of `zone.js`, an old version of `fakeAsync/async` logic were still kept inside `@angular/core/testing`
package as `fallback` logic. Since now `Angular8+` already use `zone.js 0.9+`, so
those fallback logic is removed.
PR Close#37879
Revert back to downloading cldr-data directly as the npm package seems
to no longer be maintained and additionally, it carries a ~350mb cost
in our node modules that is unnecessarily downloaded by most developers
and on CI.
PR Close#39341
Zone.js support `Angular package format` since `0.11`, but the `fesm2015` bundles
are not `esm` format, it still use `umd` bundle which is not correct, in this PR,
a new `esm` bundle output is added in `rollup_bundle` rule under `tools`, so
zone.js can use the new rule to generate `esm` bundles.
PR Close#39203
Updates to rules_nodejs 2.2.0. This is the first major release in 7 months and includes a number of features as well
as breaking changes.
Release notes: https://github.com/bazelbuild/rules_nodejs/releases/tag/2.0.0
Features of note for angular/angular:
* stdout/stderr/exit code capture; this could be potentially be useful
* TypeScript (ts_project); a simpler tsc rule that ts_library that can be used in the repo where ts_library is too
heavy weight
Breaking changes of note for angular/angular:
* loading custom rules from npm packages: `ts_library` is no longer loaded from `@npm_bazel_typescript//:index.bzl`
(which no longer exists) but is now loaded from `@npm//@bazel/typescript:index.bzl`
* with the loading changes above, `load("@npm//:install_bazel_dependencies.bzl", "install_bazel_dependencies")` is
no longer needed in the WORKSPACE which also means that yarn_install does not need to run unless building/testing
a target that depends on @npm. In angular/angular this is a minor improvement as almost everything depends on @npm.
* @angular/bazel package is also updated in this PR to support the new load location; Angular + Bazel users that
require it for ng_package (ng_module is no longer needed in OSS with Angular 10) will need to load from
`@npm//@angular/bazel:index.bzl`. I investigated if it was possible to maintain backward compatability for the old
load location `@npm_angular_bazel` but it is not since the package itself needs to be updated to load from
`@npm//@bazel/typescript:index.bzl` instead of `@npm_bazel_typescript//:index.bzl` as it depends on ts_library
internals for ng_module.
* runfiles.resolve will now throw instead of returning undefined to match behavior of node require
Other changes in angular/angular:
* integration/bazel has been updated to use both ng_module and ts_libary with use_angular_plugin=true.
The latter is the recommended way for rules_nodejs users to compile Angular 10 with Ivy. Bazel + Angular ViewEngine is
supported with @angular/bazel <= 9.0.5 and Angular <= 8. There is still Angular ViewEngine example on rules_nodejs
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_view_engine on these older versions but users
that want to update to Angular 10 and are on Bazel must switch to Ivy and at that point ts_library with
use_angular_plugin=true is more performant that ng_module. Angular example in rules_nodejs is configured this way
as well: https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular. As an aside, we also have an
example of building Angular 10 with architect() rule directly instead of using ts_library with angular plugin:
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_bazel_architect.
NB: ng_module is still required for angular/angular repository as it still builds ViewEngine & @angular/bazel
also provides the ng_package rule. ng_module can be removed in the future if ViewEngine is no longer needed in
angular repo.
* JSModuleInfo provider added to ng_module. this is for forward compat for future rules_nodejs versions.
PR Close#39182
Updates to rules_nodejs 2.2.0. This is the first major release in 7 months and includes a number of features as well
as breaking changes.
Release notes: https://github.com/bazelbuild/rules_nodejs/releases/tag/2.0.0
Features of note for angular/angular:
* stdout/stderr/exit code capture; this could be potentially be useful
* TypeScript (ts_project); a simpler tsc rule that ts_library that can be used in the repo where ts_library is too
heavy weight
Breaking changes of note for angular/angular:
* loading custom rules from npm packages: `ts_library` is no longer loaded from `@npm_bazel_typescript//:index.bzl`
(which no longer exists) but is now loaded from `@npm//@bazel/typescript:index.bzl`
* with the loading changes above, `load("@npm//:install_bazel_dependencies.bzl", "install_bazel_dependencies")` is
no longer needed in the WORKSPACE which also means that yarn_install does not need to run unless building/testing
a target that depends on @npm. In angular/angular this is a minor improvement as almost everything depends on @npm.
* @angular/bazel package is also updated in this PR to support the new load location; Angular + Bazel users that
require it for ng_package (ng_module is no longer needed in OSS with Angular 10) will need to load from
`@npm//@angular/bazel:index.bzl`. I investigated if it was possible to maintain backward compatability for the old
load location `@npm_angular_bazel` but it is not since the package itself needs to be updated to load from
`@npm//@bazel/typescript:index.bzl` instead of `@npm_bazel_typescript//:index.bzl` as it depends on ts_library
internals for ng_module.
* runfiles.resolve will now throw instead of returning undefined to match behavior of node require
Other changes in angular/angular:
* integration/bazel has been updated to use both ng_module and ts_libary with use_angular_plugin=true.
The latter is the recommended way for rules_nodejs users to compile Angular 10 with Ivy. Bazel + Angular ViewEngine is
supported with @angular/bazel <= 9.0.5 and Angular <= 8. There is still Angular ViewEngine example on rules_nodejs
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_view_engine on these older versions but users
that want to update to Angular 10 and are on Bazel must switch to Ivy and at that point ts_library with
use_angular_plugin=true is more performant that ng_module. Angular example in rules_nodejs is configured this way
as well: https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular. As an aside, we also have an
example of building Angular 10 with architect() rule directly instead of using ts_library with angular plugin:
https://github.com/bazelbuild/rules_nodejs/tree/stable/examples/angular_bazel_architect.
NB: ng_module is still required for angular/angular repository as it still builds ViewEngine & @angular/bazel
also provides the ng_package rule. ng_module can be removed in the future if ViewEngine is no longer needed in
angular repo.
* JSModuleInfo provider added to ng_module. this is for forward compat for future rules_nodejs versions.
@josephperrott, this touches `packages/bazel/src/external.bzl` which will make the sync to g3 non-trivial.
PR Close#37727
Remove @angular/platform-webworker and @angular/platform-webworker-dynamic
as they were deprecated in v8
BREAKING CHANGE: @angular/platform-webworker and @angular/platform-webworker-dynamic
have been removed as they were deprecated in v8
PR Close#38846
Previously we added a browser target for `firefox` into the
dev-infra package. It looks like as part of this change, we
accidentally switched the local web testing target to `firefox`.
Web tests are not commonly run locally as we use Domino and
NodeJS tests for primary development. Sometimes though we intend
to run tests in a browser. This would currently work with Firefox
but not on Windows (as Firefox is a noop there in Bazel).
This commit switches the primary browser back to `chromium`. Also
Firefox has been added as a second browser to web testing targets.
This allows us to reduce browsers in the legacy Saucelabs job. i.e.
not running Chrome and Firefox there. This should increase stability
and speed up the legacy job (+ reduced rate limit for Saucelabs).
PR Close#38435
Previously the instructions were included in the golden files to monitor the frequency and rate of
the instruction API changes for the purpose of understanding the stability of this API (as it was
considered for becoming a public API and deployed to npm via generated code).
This experiment has confirmed that the instruction API is not stable enough to be used as public
API. We've since also came up with an alternative plan to compile libraries with the Ivy compiler
for npm deployment and this plan does not rely on making Ivy instructions public.
For these reasons, I'm removing the instructions from the golden files as it's no longer important
to track them.
The are three instructions that are still being included: `ɵɵdefineInjectable`, `ɵɵinject`, and
`ɵɵInjectableDef`.
These instructions are already generated by the VE compiler to support tree-shakable providers, and
code depending on these instructions is already deployed to npm. For this reason we need to treat
them as public api.
This change also reduces the code review overhead, because changes to public api golden files now
require multiple approvals.
PR Close#38224
We recently reworked our `ng_rollup_bundle` rule to no longer output
ESM5 and to optimize applications properly (previously applications were
not optimized properly due to incorrect build optimizer setup).
This change meant that a lot of symbols have been removed from the
golden correctly. See: fd65958b88
Unfortunately though, a few symbols have been accidentally removed
because they are now part of the bundle as ES2015 classes which the
symbol extractor does not pick up. This commit fixes the symbol
extractor to capture ES2015 classes. We also update the golden to
reflect this change.
PR Close#38093
Adds Firefox as browser to `dev-infra/browsers` with RBE
compatibility. The default Firefox browser is not compatible similar to
the default Chromium version exposed by `rules_webtesting`.
The Angular Components repository will use this browser target as
it enables RBE support. Also it gives us more flexibility about
the Firefox version we test against. The version provided by
`rules_webtesting` is very old and most likely not frequently
updated (based on past experience).
PR Close#38029
Often changelogs are generated from the patch branch and then
cherry-picked into the `CHANGELOG.md` file in `master` for
better access and readability. This is problematic though as
`conventional-changelog` (the tool we use for generating the
changelog), will duplicate commits when a future changelog
is generated from `master` then (i.e. for a new minor release).
This happens because conventional-changelog always generates the
changelog from the latest tag in a given branch to `HEAD`. The
tag in the patch branch does not correspond to any SHA in `master`
so the intersection of commits is not automatically omitted.
We work around this naively (until we have a better tool provided
by dev-infra), by deduping commits that are already part of the
changelog. This has proven to work as expected in the components
repo.
PR Close#37956
Refactors the `ng_rollup_bundle` rule to a macro that relies on
the `@bazel/rollup` package. This means that the rule no longer
deals with custom ESM5 flavour output, but rather only builds
prodmode ES2015 output. This matches the common build output
in Angular projects, and optimizations done in CLI where
ES2015 is the default optimization input.
The motiviation for this change is:
* Not duplicating rollup Bazel rules. Instead leveraging the official
rollup rule.
* Not dealing with a third TS output flavor in Bazel.The ESM5 flavour has the
potential of slowing down local development (as it requires compilation replaying)
* Updating the rule to be aligned with current CLI optimizations.
This also _fixes_ a bug that surfaced in the old rollup bundle rule.
Code that is unused, is not removed properly. The new rule fixes this by
setting the `toplevel` flag. This instructs terser to remove unused
definitions at top-level. This matches the optimization applied in CLI
projects. Notably the CLI doesn't need this flag, as code is always
wrapped by Webpack. Hence, the unused code eliding runs by default.
PR Close#37623
Historically files to be formatted were added to a listing (via matchers)
to be included in formatting. Instead, this change begins efforts to
instead include all files in format enforcement, relying instead on an
opt out methodology.
PR Close#36940
Rename bazel workspace from npm_dev_infra to npm_angular_dev_infra_private to make it clear that this package is private to angular.
Change driver-utilities module_name to match the new bazel workspace name.
Correct a comment by rewording it from "deployed version" to "published version".
Fix merge conflicts in tmpl-package.json
Make "//packages/bazel/src:esm5.bzl" replacement more generalized so that importing from "//packages/bazel" works.
Deleted "dev_infra/*" path from modules/benchmarks tsconfig.
Moved //dev-infra/benchmark/browsers to //dev-infra/browsers.
PR Close#36800
This reverts commit 078b0be4dc.
The original commit was a work around for a bug in CLI. That bug was fixed in the CLI, as a result this change is no longer needed and is being reverted.
PR Close#37074
Remove TypeScript 3.6 and 3.7 support from Angular along with tests that
ensure those TS versions work.
BREAKING CHANGE: typescript 3.6 and 3.7 are no longer supported, please
update to typescript 3.8
PR Close#36329
For testing on IE, shims must be served in es5. Because the shims
served in these tests come from node_modules and are not part of
the angular/angular source code, they must be transpiled to es5 if
they are published as es6. This macro allows for a uniform method
for running this transpilation during the build process.
PR Close#36802
Migrates away from gulp to ng-dev for running our formatter.
Additionally, provides a deprecation warning for any attempted
usage of the previous `gulp format:*` tasks.
PR Close#36726
* Move tools/brotli-cli, tools/browsers, tools/components,
tools/ng_rollup_bundle, and modules/e2e_util to dev-infra/benchmarking
* Fix imports and references to moved folders and files
* Set up BUILD.bazel files for moved folders so they can be packaged with
dev-infra's :npm_package
PR Close#36434
Previously our CI during the setup process has made requests
to the Github API to determine the target branch and shas.
With this change, this information is now determined via git
commands using pipeline parameters from CircleCI.
PR Close#36500
Although this code has been part of Angular 9.x I only noticed this
error when upgrading to Angular 9.1.x because historically the source
locale data was not injected when localizing, but as of
angular/angular-cli#16394 (9.1.0) it is now included. This tipped me off
that my other bundles were not being built properly, and this change
allows me to build a valid ES5 bundle (I have also added a verification
step to my build pipeline to alert me if this error appears again in any
of my bundles).
I found the `locales/global/*.js` file paths being referenced by the
`I18nOptions` in
@angular-devkit/build-angular/src/utils/i18n-options.ts,
and following that it looks like it is actually loaded and used in
@angular-devkit/build-angular/src/utils/process-bundle.ts. I saw the
function `terserMangle` does appear that it is likely aware of the build
being ES5, but I'm not sure why this is not producing a valid ES5
bundle.
This change updates `tools/gulp-tasks/cldr/extract.js` to produce ES5
compliant `locales/global/*.js` and that fixes my issue. However, I am
not sure if @angular-devkit/build-angular should be modified to produce
a valid ES5 bundle instead or if the files could be TypeScript rather
than JavaScript files.
A test that a valid ES5 bundle is produced would be helpful, and I hope
this is reproducible and not some issue with my config.
PR Close#36342
Previously, the bazel stamping regex only matched on versions
0-9 for major and minor numbers, this update allows for matching
on any number for major, minor or patch.
PR Close#36523
Prior to this change we manage a local version of commit message validation
in addition to the commit message validation tool contained in the ng-dev
tooling. By adding the ability to validate a range of commit messages
together, the remaining piece of commit message validation that is in the
local version is replicated.
We use both commands provided by the `ng-dev commit-message` tooling:
- pre-commit-validate: Set to automatically run on an git hook to validate
commits as they are created locally.
- validate-range: Run by CI for every PR, testing that all of the commits
added by the PR are valid when considered together. Ensuring that all
fixups are matched to another commit in the change.
PR Close#36172
Update to clang@1.4.0 to gain support for optional changing and nullish
coalescing. Because this would trigger a change on >1800 files in the
repository, also changes our format enforcement to only be run against
changed files. This will allow us to incramentally roll out the value
add of the upgraded clang format.
PR Close#36203
$(location) is not recommended in the bazel docs as depending on context it will either return the value of $(execpath) or $(rootpath). rules_nodejs now supports $(rootpath) and $(execpath) in templated_args of nodejs_binary.
PR Close#36308
This is done by requesting the refs and shas for the PR when the
env.sh script is run. Additionally, the env.sh script is now setup
to write all of the environment variables created to a cache file
and subsequent loads of the environment load the values from there.
The get-refs-and-shas-for-target.js script now also first attempts
to load the refs and shas from an environment variable before
falling back to requesting from github via the API.
PR Close#36207
The `ng_rollup_bundle` rule currently is only consumed in the
Angular framework repository. This means that Angular packages
are built from source, and ngcc is never needed to build rollup
bundles using Ivy.
Though, this rule is planned to be shared with other repositories
to support common benchmark code. This means that ngcc needs to be
handled as these other repositories cannot build Angular from source,
but instead consume Angular through NPM (with ngcc enabling Ivy).
The `ng_rollup_bundle` rule needs to dynamically prioritize `ngcc`
generated main resolution fields if `--define=angular_ivy_enabled=True`
is set (or with the alias: `--config=ivy`).
ds
PR Close#36044
Currently on Windows, it's not possible to approve goldens in
`ts-api-guardian`. This is because paths are resolved relatively
to the working directory. In Windows, golden files are resolved
to the actual workspace directory. The current logic tries to
compute a relative path to the runfile from the working directory.
This causes the file paths to have a lot of parent directory
path segments. Eventually, when joined with the build workspace
directory, the paths end up being incorrect. e.g.
```
fileName = ../../../../../../projects/angular/golden/<..>/common.d.ts`
outFile = BUILD_WORKSPACE_DIR + fileName;
```
To fix this, we no longer deal with confusing relative paths, but
instead always use absolute file system paths.
Additionally, this fixes that new goldens are generated at the wrong
location on all platforms.
PR Close#36115
Also add two targets to make it more convienent to tail & dump the sauce service logs: //tools/saucelabs:sauce_service_tail & //tools/saucelabs:sauce_service_log
PR Close#36109
The dev-infra package currently uses rollup for packaging. This has been
done initially as a way to workaround manifest paths being used in the
AMD JavaScript output.
The actual solution to this problem is setting module names that match
the `package.json` name. This ensures that the package can be consumed
correctly in Bazel, and through NPM. This allows us to get rid of the
rollup bundling, and we don't need to hard-code which dependencies
should be external or included.
Additionally, tools that are part of `dev-infra` can now specify
their external dependencies simply in the `package.json`. To reduce
version duplication, and out-of-sync versions, a new genrule has been
created that syncs the versions with the top-level project
`package.json`.
PR Close#35647
Creates a tool for validating TypeScript circular dependencies. The tool
has been designed in a way that allows us to slowly burn down the amount
of circular dependencies while ensuring that we don't regress.
The tool doesn't rely on Madge since it doesn't provide a programmatic
way for doing path mapping. We need path mapping since we also want to
check for cycles across different entry-points or packages. The tool
uses the TypeScript AST to manually collect cycles. This code is not
a lot of bloat and also gives us more flexibility (if we ever need it).
Closes#35041.
PR Close#35647
This reverts commit f862536ec4.
Reverted due to test failures that have shown up in the Windows CI Jobs
that don't run on pull requests. A follow-up will be sent that re-adds
the changes w/ fixes for the windows test job.
PR Close#36113
Currently on Windows, it's not possible to approve goldens in
`ts-api-guardian`. This is because paths are resolved relatively
to the working directory. In Windows, golden files are resolved
to the actual workspace directory. The current logic tries to
compute a relative path to the runfile from the working directory.
This causes the file paths to have a lot of parent directory
path segments. Eventually, when joined with the build workspace
directory, the paths end up being incorrect. e.g.
```
fileName = ../../../../../../projects/angular/golden/<..>/common.d.ts`
outFile = BUILD_WORKSPACE_DIR + fileName;
```
To fix this, we no longer deal with confusing relative paths, but
instead always use absolute file system paths.
Additionally, this fixes that new goldens are generated at the wrong
location on all platforms.
PR Close#36096
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
* integration tests target definitions in integration/BUILD.bazel updated to use a single dict
* payload tracking for integration tests updated to work under Bazel
* legacy integration_test CI job removed
* integration/run_tests.sh script no longer used in CI so it has been updated for running integration tests locally in the legacy way
PR Close#35985
The `contributing-stats/get-data.ts` script, which is used to retrieve
org-wide contribution data, returned the contributors in retrieval
order.
This commit ensures contributors are ordered alphabetically, which makes
it easier to find the stats for a specific contributor.
PR Close#35997
This commit adds a debugging section to the existing
SauceLabs README. It lays out tips to debug and resolve
a few issues that I encountered while running SauceLabs
locally this morning. It also adds some clarification
to the steps in the beginning.
PR Close#35704
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
This script gets all of the current users for the organization and retrieves
information about PR/Issue contributions/authorship since a provided date.
Returning this information as a CSV.
PR Close#35834
It's an error to declare a variable twice on a specific template:
```html
<div *ngFor="let i of items; let i = index">
</div>
```
This commit introduces a template type-checking error which helps to detect
and diagnose this problem.
Fixes#35186
PR Close#35674
Switches our tslint setup to the standard `tslint.json` linter excludes.
The set of files that need to be linted is specified through a Yarn script.
For IDEs, open files are linted with the closest tslint configuration, if the
tslint IDE extension is set up, and the source file is not excluded.
We cannot use the language service plugin for tslint as we have multiple nested
tsconfig files, and we don't want to add the plugin to each tsconfig. We
could reduce that bloat by just extending from a top-level tsconfig that
defines the language service plugin, but unfortunately the tslint plugin does
not allow the use of tslint configs which are not part of the tsconfig project.
This is problematic since the tslint configuration is at the project root, and we
don't want to copy tslint configurations next to each tsconfig file.
Additionally, linting of `d.ts` files has been re-enabled. This has been
disabled in the past and a TODO has been left. This commit fixes the
lint issues and re-enables linting.
PR Close#35800
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
Since ivy is now default having `ivy` scope does not make sense. We are creating `ve` scope for cases where we are specifically fixing view-engine.
NOTE: Also sorted scopes alphabetically.
PR Close#35799
When the `NgIf` directive is used in a template, its context variables
can be used to capture the bound value. This is typically used together
with a pipe or function call, where the resulting value is captured in a
context variable. There's two syntax forms available:
1. Binding to `NgIfContext.ngIf` using the `as` syntax:
```html
<span *ngIf="(user$ | async) as user">{{user.name}}</span>
```
2. Binding to `NgIfContext.$implicit` using the `let` syntax:
```html
<span *ngIf="user$ | async; let user">{{user.name}}</span>
```
Because of the semantics of `ngIf`, it is known that the captured
context variable is non-nullable, however the template type checker
would not consider them as such and still report errors when
`strictNullTypes` is enabled.
This commit updates `NgIf`'s context guard to make the types of the
context variables non-nullable, avoiding the issue.
Fixes#34572
PR Close#35125
Adds a new feature to ts-api-guardian allowing for automatically discovering all
entry point d.ts files from all package.json files in a provided directory.
PR Close#35691
* it's tricky to get out of the runfiles tree with `bazel test` as `BUILD_WORKSPACE_DIRECTORY` is not set but I employed a trick to read the `DO_NOT_BUILD_HERE` file that is one level up from `execroot` and that contains the workspace directory. This is experimental and if `bazel test //:test.debug` fails than `bazel run` is still guaranteed to work as `BUILD_WORKSPACE_DIRECTORY` will be set in that context
* test //integration:bazel_test and //integration:bazel-schematics_test exclusively
* run "exclusive" and "manual" bazel-in-bazel integration tests in their own CI job as they take 8m+ to execute
```
//integration:bazel-schematics_test PASSED in 317.2s
//integration:bazel_test PASSED in 167.8s
```
* Skip all integration tests that are now handled by angular_integration_test except the tests that are tracked for payload size; these are:
- cli-hello-world*
- hello_world__closure
* add & pin @babel deps as newer versions of babel break //packages/localize/src/tools/test:test
@babel/core dep had to be pinned to 7.6.4 or else //packages/localize/src/tools/test:test failed. Also //packages/localize uses @babel/generator, @babel/template, @babel/traverse & @babel/types so these deps were added to package.json as they were not being hoisted anymore from @babel/core transitive.
NB: integration/hello_world__systemjs_umd test must run with systemjs 0.20.0
NB: systemjs must be at 0.18.10 for legacy saucelabs job to pass
NB: With Bazel 2.0, the glob for the files to test `"integration/bazel/**"` is empty if integation/bazel is in .bazelignore. This glob worked under these conditions with 1.1.0. I did not bother testing with 1.2.x as not having integration/bazel in .bazelignore is correct.
PR Close#33927
Verify that all files in the repo are covered by the pullapprove config
and that all rules in the pullapprove config match at least one file
in the repo.
PR Close#35060
In the past we had connecitivity issues on Saucelabs. Browsers on
mobile devices were not able to properly resolve the `localhost`
hostname through the tunnel. This is because the device resolves
`localhost` or `127.0.0.1` to the actual Saucelabs device, while it
should resolve to the tunnel host machine (in our case the CircleCI VM).
In the past, we simply disabled the failing devices and re-enabled the
devices later. At this point, the Saucelabs team claimed that the
connecitivy/proxy issues were fixed.
Saucelabs seems to have a process for VMs which ensures that requests to
`localhost` / `127.0.0.1` are properly resolved through the tunnel. This
process is not very reliable and can cause tests to fail. Related issues have been
observed/mentioned in the Saucelabs support docs. e.g.
https://support.saucelabs.com/hc/en-us/articles/115002212447-Unable-to-Reach-Application-on-localhost-for-Tests-Run-on-Safari-8-and-9-and-Edgehttps://support.saucelabs.com/hc/en-us/articles/225106887-Safari-and-Internet-Explorer-Won-t-Load-Website-When-Using-Sauce-Connect-on-Localhost
In order to ensure that requests are always resolved through the tunnel,
we add our own domain alias in the CircleCI's hosts file, and enforce that
it is always resolved through the tunnel (using the `--tunnel-domains` SC flag).
Saucelabs devices by default will never resolve this domain/hostname to the
actual local Saucelabs device.
PR Close#35171
Previously we needed the `components-repo-ci` blocklist to disable
tests that were failing during the development of Ivy. Since we fixed
all those failing tests, and we don't want to regress, we can remove the
blocklist logic.
Resolves FW-1807
PR Close#35115
the commit causes lint on upstream/master to fail. We need to fix the script to not check too many past commits, but that
will have to wait until a follow up PR.
PR Close#35017
* Added a /tools/saucelabs/sauce-service.sh script that manages the sauce-connect as a service which is used by the karma-saucelabs.js wrapper to start the service.
* Added /tools/saucelabs/README.md that covers the details of SauceLabs karma testing with Bazel.
PR Close#34769
We are migrating to PullApprove for our PR review management in an attempt
to allow for more granular and equitable code review assignments across the
team. Currently this migration is equivalent in the review assignments
it will create. Once stable, our expectation is that we will be able to
take advantage of PullApproves additional features for things like staged
reviews.
PR Close#34814
Previously we would write to class/style as strings `element.className` and `element.style.cssText`. Turns out that approach is good for initial render but not good for updates. Updates using this approach are problematic because we have to check to see if there was an out of bound write to style and than perform reconciliation. This also requires the browser to bring up CSS parser which is expensive.
Another problem with old approach is that we had to queue the DOM writes and flush them twice. Once on element advance instruction and once in `hostBindings`. The double flushing is expensive but it also means that a directive can observe that styles are not yet written (they are written after directive executes.)
The new approach uses `element.classList.add/remove` and `element.style.setProperty/removeProperty` API for updates only (it continues to use `element.className` and `element.style.cssText` for initial render as it is cheaper.) The other change is that the styling changes are applied immediately (no queueing). This means that it is the instruction which computes priority. In some circumstances it may result in intermediate writes which are than overwritten with new value. (This should be rare)
Overall this change deletes most of the previous code and replaces it with new simplified implement. The simplification results in code savings.
PR Close#34804
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
The `computeStaticStyling` will be used for computing static styling value during `firstCreatePass`.
The function takes into account static styling from the template as well as from the host bindings. The host bindings need to be merged in front of the template so that they have the correct priority.
PR Closes#34418
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
We rename the `material-unit-tests` job to `components-repo-unit-tests`
because the job runs all unit tests found in the Angular Components repository.
This includes the Angular CDK, Angular Material and more. Also the repository has
been renamed from `angular/material2` to `angular/components` in the past.
PR Close#34898
It was previously defined in core without being exposed publicly, whereas `getLocaleCurrencyName` and `getLocaleCurrencySymbol` were defined in common, and publicly exposed.
This commit now privately exposes `ɵgetLocaleCurrencyCode` from core, and reexports it publicly from common.
PR Close#34810
Creates a Bazel macro that can be used to test packages for
circular dependencies. We face one limitation with Bazel:
* Built packages use module imports, and not relative source file
paths. This means we need custom resolution.
Fortunately, tools like `madge` support custom resolution.
Also removes the outdated `check-cycles` gulp task that
didn't catch circular dependencies. It seems like the test
became broken when we switched the packages-dist output to Bazel. It
breaks because the Bazel output doesn't use relative paths, but uses
the module imports. This will be handled in the new Bazel macro/rule.
PR Close#34774
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
Currently we are showing the following link https://github.com/angular/angular/blob/master/docs/PUBLIC_API.md#golden-files whenever there are updates to the golden files. However this is not correct as this document only applies to the Angular repo as other consumers of ts-api-guardian have different commands, and they store they golden files in different locations.
PR Close#34786
This release resolves the bootstrap require patching issue with jasmine_node_test. Require patches are now included before any bootstrap scripts.
PR Close#34736
Adds tests to verify that jasmine_node_test targets fail as expected.
This is to catch any future regressions to jasmine_node_test where tests pass silently without executing.
See https://github.com/bazelbuild/rules_nodejs/pull/1540 for an example of a potential regression.
PR Close#34736
This is recommended in the Bazel docs as $(location) is ambiguous and can mean either $(execpath) or $(rootpath) depending on the context.
PR Close#34736
This brings in a few minor fixes including a better way to patch require for bootstrap scripts
Also remove install_source_map_support attribute from nodejs_binary targets This attribute will be removed from nodejs_binary in the future
PR Close#34736
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Both `MinLengthValidator` and `MaxLengthValidator` accepted only string inputs for the length required, which throws with Ivy and `fullTemplateTypeCheck` enabled:
<!-- min = 2 in the component -->
<input [minlength]="min">
with:
Type 'number' is not assignable to type 'string | undefined'
This relaxes the accepted type to `string | number` to avoid breakage when developers switch to Ivy and fTTC.
PR Close#32057
Default currency code in CurrencyPipe is currently hardcoded to USD
and is not configurable. This commit allows the default currency code
to be configurable by adding a DEFAULT_CURRENCY_CODE injection token.
Example:
```
providers: [{ provide: DEFAULT_CURRENCY_CODE, useValue: "GBP" }]
...
{{ 123.45 | currency }} // outputs £123.45 as opposed to always $123.45 before
```
Closes: #25461
PR Close#32584
This is recommended in the Bazel docs as $(location) is ambiguous and can mean either $(execpath) or $(rootpath) depending on the context.
PR Close#34589
