Some elements may have multiple bindings with the same name. We should accept and emit them all, as long as they have different kinds.
Co-authored-by: Miles Malerba <mmalerba@users.noreply.github.com>
PR Close#53574
The template pipeline was previously not reserving a variable slot for the result of the `deferWhen` instruction, which caused the `defer when` feature to crash at runtime.
PR Close#53574
When an element is self-closing, it will cause an `element` instruction to be emitted (instead of `elementStart`/`elementEnd`). In that case, we should use map whole source span for the instruction, not just the starting span.
PR Close#53574
The template pipeline was producing slightly different names than TemplateDefinitionBuilder for defer deps functions. I have added a workaround in the name of backwards compatibility, to avoid suffixing the const pool function names.
PR Close#53574
Previously when we found an ICU that was the only translatable content
in its i18n block, we assigned the block's i18n context to the ICU.
However, we neglected to set the contextKind to inidcate that the
context was associated with an ICU. As of this change we now set the
correct contextKind.
This change also refactors the context creation to explicitly separate
creation of contexts for attributes, root i18n blocks, child i18n
blocks, and ICUs. This allows us to more easily ensure that contexts are
shared appropriately between i18n blocks and ICUs.
Finally, this change also refactors the i18n message extraction pahse to
simplify how contexts are converted to i18n messages. This
simplification should make it easier to merge i18n contexts and i18n
messages into a single op in a future refactor.
PR Close#53557
When a view has the `Dirty` flag and is reattached, we should ensure that it is
reached and refreshed during the next change detection run from above.
In addition, when a view is created and attached, we should ensure that it is reached
and refreshed during change detection. This can happen if the view is
created and attached outside a change run or when it is created and
attached after its insertion view was already checked. In both cases, we
should ensure that the view is reached and refreshed during either the
current change detection or the next one (if change detection is not
already running).
We can achieve this by creating all views with the `Dirty` flag set.
However, this does happen to be a breaking change in some scenarios.
The one identified internally was actually depending on change detection
_not_ running immediately because it relied on an input value that was
set using `ngModel`. Because `ngModel` sets its value in a `Promise`, it
is not available until the _next_ change detection cycle. Ensuring
created views run in the current change change detection will result in
different behavior in this case.
Making option the default is the solution to #52928. That will have to
wait for a major version.
PR Close#53022
Whenever an input of a directive changes, the semantic symbol should
reflect this change for the type check API. This is important because
signal inputs require special output in the type checking blocks- hence
we need to ensure that such type checking blocks are re-generated
properly.
Test verify that incremental type-checking builds work as expected now.
PR Close#53521
Whenever a signal input is captured in a type check block, we will
insert an import. This will change the import graph so that the full
TypeScript program cannot be structurally re-used.
We can fix this trivially by ensuring the import graph remains stable,
by always generating an import to e.g. `@angular/core`. This fixes the
issue nicely for type-check block files. A test verifies this.
For inline code, such as TCB inline or the type constructors inline,
this fix is not applicable because we would change user-input source files,
adding new edges that would not exist for subsequent builds- causing the
program to be not re-used completely. One idea was to rely on the
existing edge that can be assumed to exist for directive code files.
This is true technically, but in practice TS does not deduplicate
imports- so our new namespace import when referencing our symbols will
invalidate the re-use. We will address this in a follow-up. There are a
couple of options, such as working with the TS team, updating the
existing edge, or inlining our helpers as well.
PR Close#53521
This commit adds the last remaining piece for signal input
type-checking. Bound values to signal inputs are already checked
properly at this point, but inference of generic directive/component
types through their inputs is not implemented.
This commit fixes this. To achieve this, there are a couple of potential
solutions. The generics of a directive are inferred based on input
value expressions using a so-called type constructor. The constructor
looks something like this:
```
const _ctor = <T>(v: Pick<Dir<T>, 'input1', 'input2'>) => Dir<T>;
_ctor({input1: expr1, input2: expr2});
```
This works very well for non-signal inputs where the class member is
directly holding the input values. For signal inputs, this does NOT
work because the class member will actually hold the `InputSignal`
instance. There are a couple of solutions to this:
1. Calling `_ctor` with an `InputSignal<typeof value>`
2. Converting the `_ctor` input signal fields to their write types
(unwrapping the input signals).
We've decided to go with the second option as TypeScript is very
sensitive with assignments and its checks. i.e. co-variance,
contravariance or bivariance. Semantically it makes more sense to unwrap
the input signal "write type" directly and "assign to it". This is safer
and conceptually also easier to follow. A type constructor continues to
only receive the "expresison values". This simplifies code as well.
It's worth noting that the unwrapping as per option 2 also comes at a
cost. We need to be able to generate imports in type constructors. This
was not possible until the previous commit because inline type constructors
did not have an associated type-check block `Environment` and we were
missing access to expression translation and correct import generation.
Overall, solution 2 is now implemented as works as expected. This commit
adds additional unit tests to ensure this.
PR Close#53521
For signal inputs we are looking at generating additional code inside
type constructors. This code is planned to reference an external type
from `@angular/core` to unwrap `InputSignal`'s class fields.
The existing `Environment` class contains helpers for emitting such
references / and translating them from the output AST. We extract
this logic into a superclass for only emitting references. A similar
type already existed to avoid circular dependencies- but now we have
actual use-cases to populate this as a base class.
This allows us to create more-suitable minimal emit environments
when we e.g. generate type constructors inline- which are not
part of any type check block. The existing `Environment` class is scoped
to type check blocks and therefore was not suitable.
PR Close#53521
Signal inputs do not need coercion members for their transforms. That is
because the `InputSignal` type- which is accessible in the class member-
already holds the type of potential "write values". This eliminates the
need for coercion members which were simply used to somehow capture this
write type (especially when libraries are consumed and only `.d.ts` is
available).
We can simplify this, and also significantlky loosen restrictions
of transform functions- given that we can fully rely on TypeScript for
inferring the type. There is no requirement in being able to
"transplant" the type into different places- hence also allowing
supporting transform functions with generics, or overloads.
In a follow-up commit, once more parts are place, there will be some
compliance tests to ensure these new "loosend restrictions".
PR Close#53521
This commit ensures that the type-check diagnostic testing
infrastructure is prepared to validate signal inputs. i.e. providing the
necessary "mocks" in the fake "d.ts" of `@angular/core`.
The commit then sets up a Golang-style table driven testing environment
that allows us to validate/verify signal input type-checking in a
readable way.
With this infrastructure set up, this commit defines an initial set
of unit tests for type checking of input signals.
PR Close#53521
This commit introduces the initial type-checking for signal inputs.
To enable type-checking od signal inputs, there are a couple of tricks
needed. It's not trivial as it would look like at first glance.
Initial attempts could have been to generate additional statements in
type-checking blocks for signal inputs to simply call a method like
`InputSignal#applyNewValue`. This would seem natural, as it would match
what will happen at runtime, but this would break the language-service
auto completion in a highly subtle way. Consider the case where multiple
directives match the same input. Consider the directives have some
overlap in accepted input values, but they also have distinct diverging
values, like:
```ts
class DirA {
value = input<'apple'|'shared'>();
}
class DirB {
value = input<'orange'|'shared'>();
}
```
In such cases, auto completion for the binding expression should suggest
the following values: `apple`, `shared`, `orange` and `undefined`.
The language service achieves this by getting completions in the
type-check block where the user expression would live. This BREAKS if
we'd have multiple places where the expression from the user is used.
Two different places, or more, surface additional problems with
diagnostic collection. Previously diagnostics would surface the union
type of allowed values, but with multiple places, we'd have to work with
potentially 1+ diagnostics. This is non-ideal.
Another important consideration is test coverage. It might sound
problematic to consider the existing test infrastructure as relevant,
but in practice, we have thousands of diagnostic type check block tests
that would greatly benefit if the general emit structure would still
match conceptually. This is another bonus argument on why changing the
way inputs are applied is probably an option we should consider as a
last resort.
Ultimately, there is a good solution where we unwrap directive signal
inputs, based on metadata, and access a brand type field on the
`InputSignal`. This ensures auto-completion continues to work as is, and
also the structure of type check blocks doesn't change conceptually. In
future commits we also need to handle type-inference for generic signal
inputs.
Note: Another alternative considered, in terms of using metadata or not.
We could have type helpers to unwrap signal inputs using type helpers
like: `T extends InputSignal<any, WriteT> ? WriteT : T`. This would
allow us to drop the input signal metadata dependency, but in reality,
this has a few issues:
- users might have `@Input`'s passing around `InputSignal`'s. This is
unlikely, but shows that the solution would not be fully correct.
- we need the metadata regardless, as we plan on accessing it at runtime
as well, to distinguish between signal inputs and normal inputs when
applying new values. This was not clear when this option was
considered initially.
PR Close#53521
This commit captures the metadata on whether an input is signal based or
not, in the `.d.ts` of directives and components. This exposes this
information to consumers of the directives. This is needed because
libraries may use signal inputs, and we need to know whether bound
inputs to this library are signal-based or not- so that we can generate
proper type-checking code (account for `InputSignal` or not).
Additionally, this commit introduces a new structure for the partial
compilation output of directive inputs. With the current emit, inputs
are captured in a data structure that is equivalent to the internal data
structure passed to `defineDirective` (the full compilation output).
This worked fine as we only captured a few strings, but in ends up
being a bad practice because partial compilation output should NOT
capture internal data structures that might be specific to a certian
Angular core version. Instead, we introduce a new "future proof"
structure that:
- can hold additional metadata in backwards-compatible ways, like
`isSignal` or `isRequired`.
- can be parsed trivially using the `AstHost` for the linker, instead of
having to unwrap/parse an array structure.
The new structure is only emitted when we discover that some inputs are
signal based (or ultimately end up configuring input flags). This is
done for backwards compatibility, so that libraries without signal
inputs remain compatible with older linker versions. In the future,
this might be the only emit.
Compliance tests for this follow in future commits, when the linker
portion is also in place. This commit specialices on the code
generation. With the linker, and compliance test infrastructure fixed
(that is broken right now), we can test the full integration.
PR Close#53521
When working on integrating a new metadata field for inputs, I realized
there are quite a lot of duplications of interfaces. Turns out, the
facade input map type can be replaced in favor of just
`R3DirectiveInput`- even improving type safety-ness of e.g. the wrapped
node expressions of transform functions.
PR Close#53521
This commit defines the initial metadata for inputs passed around in
the compiler-cli. Inputs will now capture additional metadata on whether
they are signal-based or not. This is stored on a per-input basis as
a Zone component may contain both, signal inputs or `@Input` inputs.
The metadata is later used for type-checking, for partial output
generation, or full compilation output generation.
PR Close#53521
This commit introduces a function for declaring inputs in
components. The function is called `input`. It comes in two flavors:
- `input` for optional inputs with initial values
- `input.required` for required inputs
Inputs are declared as class members, like with `@Input`- except that
the class field will no longer hold the input value directly. Angular
takes control over the input field and exposes the input value as a
signal. The runtime implementation will follow in future commits.
This commit simply introduces:
- initial compiler detection to recognize such inputs in classes
- the initial signature of `input` and `input.required`.
Note: the defer size test is flawed and there is no minification- hence
this commit also needs to incorporate the new dependency graph changes.
PR Close#53521
The behavior of `ApplicationRef.isStable` changed in 16.1 due to
28c68f709c.
This change added a `share` to the `isStable` observable, which prevents
additional subscribers from getting a value until a new one emits. One
solution to the problem would be `shareReplay(1)`. However, that would
increase the bundle size since we do not use `shareReplay` elsewhere.
Instead, we don't even really need to share the observable.
The `Observable` available in `ApplicationRef.isStable` before the above commit
was the zone stable observable, without a `share`. The new behavior adds
only an additional observable to the stream, `hasPendingTasks` (a `BehaviorSubject`).
The observables in this stream are not expensive to subscribe to. The
only one with side effects is the `isStable` (because it subscribes to
onStable), but that one already has the `share` operator on it.
Omitting the `share` in `ApplicationRef` also means that applications on `zoneless` will not
have to pay the cost of the operator when we make zones optional because
the zone stable observable is the only place we use it.
PR Close#53541
Internationalization is whitespace sensitive. This change updates the formatting code to process for i18n attributes and prevent reformatting those sections of the template.
PR Close#53538
Using http://a as the base URL returns / instead of the actual base path when using the file:// protocol. Using document.baseURI addresses this.
Fixes#53546
PR Close#53547
This commit updates the name of the 'performance.mark'
counter used to track feature usage. It now matches
the name agreed upon by W3C for this use case:
https://github.com/w3c/user-timing/pull/108
PR Close#53542
This fix handles the common case where an ngswitch might have invalid syntax post migration. This is likely due to using elements other than case or default underneath the ngswitchcase. This will fail out of the migration for that file when these cases are detected with a useful console message.
fixes: #53234
PR Close#53530
In the case that a template has some sort of structural issue prior to migrating, like a tag that is not properly closed resulting in invalid HTML post migration, this will attempt to parse the html after migrating and revert to the original structure. An error during migration will be reported out instead.
PR Close#53530
`o.WrappedNodeExpr` can show up in some cases, when a host binding's value is inside a TS expression.
It's an open question whether we will need to support all of the TS expression types as a result.
PR Close#53478
For some reason, the parser reuses the same field to store the animation phase and the event target. We were incorrectly interpreting the presence of any value on that field as an animation phase, leading us to incorrectly emit synthetic listener instructions for listeners on events with targets. This bug is now fixes.
PR Close#53478
`$any` should be interpreted as a cast, not as a context read of a variable called `$any`. This already worked in template compilations, but the relevant phase was not enabled for host bindings.
PR Close#53478
Fixes that the compiler was throwing an error if an ambient type is used inside of an input `transform` function. The problem was that the reference emitter was trying to write a reference to the ambient type's source file which isn't necessary.
Fixes#51424.
PR Close#51474
Prior to this commit when a route is not matched and the application was running in production mode an `[Error]: NG04002` was logged in the console. This however, is not actionable when the application is running on the server where there can be multiple pages being rendered at the same time.
Now we change this to also log the route example: `[Error]: NG04002: 'products/Jeep'`.
Closes#53522
PR Close#53523
The ops for the implicit variables in `@for` loops (e.g. `$index`) are marked as being mandatory which means that they're generated even if they aren't used. These changes make them optional so they're only added when necessary.
PR Close#53515
Adds support for sanitizing host bindings. Since the tag name of the
element the host binding is being set on isn't always known, we have to
consider multiple possible security contexts.
This commit also adds additional tests to help verify correct behavior
of the sanitization logic for different edge cases.
PR Close#53513
The formatting logic would eliminate all newlines in updated template code. This adds start and end markers for tracking when the formatter is in a block of template code that changed or not. It should leave behind any newlines that are outside of a migrated section.
fixes: #53494
PR Close#53508
