* feat: Add relative mouse mode
- Add "Relative Mouse Mode" toggle in desktop toolbar and bind to InputModel
- Implement relative mouse movement path: Flutter pointer deltas -> `type: move_relative` -> new `MOUSE_TYPE_MOVE_RELATIVE` in Rust
- In server input service, simulate relative movement via Enigo and keep latest cursor position in sync
- Track pointer-lock center in Flutter (local widget + screen coordinates) and re-center OS cursor after each relative move
- Update pointer-lock center on window move/resize/restore/maximize and when remote display geometry changes
- Hide local cursor when relative mouse mode is active (both Flutter cursor and OS cursor), restore on leave/disable
- On Windows, clip OS cursor to the window rect while in relative mode and release clip when leaving/turning off
- Implement platform helpers: `get_cursor_pos`, `set_cursor_pos`, `show_cursor`, `clip_cursor` (no-op clip/hide on Linux for now)
- Add keyboard shortcut Ctrl+Alt+Shift+M to toggle relative mode (enabled by default, works on all platforms)
- Remove `enable-relative-mouse-shortcut` config option - shortcut is now always available when keyboard permission is granted
- Handle window blur/focus/minimize events to properly release/restore cursor constraints
- Add MOUSE_TYPE_MASK constant and unit tests for mouse event constants
Note: Relative mouse mode state is NOT persisted to config (session-only).
Note: On Linux, show_cursor and clip_cursor are no-ops; cursor hiding is handled by Flutter side.
Signed-off-by: fufesou <linlong1266@gmail.com>
* feat(mouse): relative mouse mode, exit hint
Signed-off-by: fufesou <linlong1266@gmail.com>
* refact(relative mouse): shortcut
Signed-off-by: fufesou <linlong1266@gmail.com>
---------
Signed-off-by: fufesou <linlong1266@gmail.com>
* option `allow-d3d-render`, default false
Add this option because it fails on some machines
Signed-off-by: 21pages <sunboeasy@gmail.com>
* only add nokhwa to windows and linux dependencies
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* view camera
Signed-off-by: 21pages <sunboeasy@gmail.com>
* `No cameras` prompt if no cameras available, `peerGetSessionsCount` use
connType as parameter
Signed-off-by: 21pages <sunboeasy@gmail.com>
* fix, use video_service_name rather than display_idx as key in qos,etc
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
Co-authored-by: Adwin White <adwinw01@gmail.com>
Co-authored-by: RustDesk <71636191+rustdesk@users.noreply.github.com>
1. Fix auto record outgoing sessions ignore record permission
2. Stop record if record permission changed
3. Update hwcodec
4. Make video thread finish faster when connection closed
Signed-off-by: 21pages <sunboeasy@gmail.com>
* seperate video decoding thread for each display
1. Separate Video Decoding Thread for Each Display
2. Fix Decode Errors When Clearing the Queue
Previously, on-flight frames after clearing the queue could not be decoded successfully. This issue can be resolved by setting a discard_queue flag when sending a refresh message. The flag will be reset upon receiving a keyframe.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* update video format along with fps to flutter
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Fix keyframe interval when auto record outgoing sessions
Signed-off-by: 21pages <sunboeasy@gmail.com>
---------
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Add option auto record outgoing session
* In the same connection, all displays and all windows share the same
recording state.
todo:
Android check external storage permission
Known issue:
* Sciter old issue, stop the process directly without stop record, the record file can't play.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* Calculate fps without distinguish displays, use one fps control
because the controlled side control fps of all displays with one FPS
variable.
* Because all displays decode frame in one thread, when there are N
displays, the video frames received in one second is `fps * N`, so the
calculated decode fps should be divided by N. Because the actual
display count is not obvious in rust, when no data frame is received for 5 seconds, the display is considered inactive, and only the active display is used as the dividend.
Signed-off-by: 21pages <sunboeasy@gmail.com>
* update hwcodec, gpucodec repo is merged to hwcodec
Signed-off-by: 21pages <pages21@163.com>
* rename gpucodec.rs to vram.rs
Signed-off-by: 21pages <pages21@163.com>
* rename all gpucodec to vram, because vram is a feature of hwcodec
Signed-off-by: 21pages <pages21@163.com>
* use one check process and one config file
* set check encode image size to 720p
Signed-off-by: 21pages <pages21@163.com>
---------
Signed-off-by: 21pages <pages21@163.com>
* refactor windows specific session, file transfer and waiting for image
1. File transfer doesn't show directory until correct session id is ensured
2. Fix file transfer, caused by `pi.username = self.lc.read().unwrap().get_username(&pi);` in `handle_peer_info` override empty username and `get_active_username` doesn't return currect session username
* Fix home directory not change when session changed, or wrong home directory
* Fix show empty remote directory rather than error messagbox when current session is in login screen
3. Show `Connected, waiting for image` after user choose the same
session id
Signed-off-by: 21pages <pages21@163.com>
* update translations
Signed-off-by: 21pages <pages21@163.com>
* Update connection.rs
---------
Signed-off-by: 21pages <pages21@163.com>
Co-authored-by: RustDesk <71636191+rustdesk@users.noreply.github.com>
1. Modify the process to have the control side lead the session switching: After the control side sends a `LoginRequest`, the controlled side will add all session information and the current session ID in the `LoginResponse`. Upon receiving the `LoginResponse`, the control side will check if the current session ID matches the ID in the `LoginConfigHandler`. If they match, the control side will send the current session ID. If they don't match, a session selection dialog will pop up, the selected session id will be sent. Upon receiving this message, the controlled side will restart if different or sub service if same .
2. Always show physical console session on the top
3. Show running session and distinguish sessions with the same name
4. Not sub service until correct session id is ensured
5. Fix switch sides not work for multisession session
6. Remove all session string join/split except get_available_sessions in
windows.rs
7. Fix prelogin, when share rdp is enabled and there is a rdp session,
the console is in login screen, get_active_username will be the rdp's
username and prelogin will be false, cm can't be created an that
causes disconnection in a loop
8. Rename all user session to windows session
Known issue:
1. Use current process session id for `run_as_user`, sahil says it can
be wrong but I didn't reproduce.
2. Have not change tray process to current session
3. File transfer doesn't update home directory when session changed
4. When it's in login screen, remote file directory is empty, because cm
have not start up
Signed-off-by: 21pages <pages21@163.com>
