## Summary
- Replace the manual `sendNewValidatorSetForEra` contract call in the
`validator-set-update` E2E test with the **validator-set-submitter
daemon** running as a Docker container
- Add `test/e2e/framework/submitter.ts` with helpers to build the image,
launch the container on the shared Docker network, and clean up after
the test
- Remove unused imports (`getOwnerAccount`, `decodeEventLog`,
`parseEther`, `gatewayAbi`) that were only needed for manual submission
The submitter automatically detects the last session of an era and
submits the validator set via Snowbridge, matching production behavior
more closely than the previous manual call.
## Test plan
- [x] `bun test e2e/suites/validator-set-update.test.ts --timeout
900000` passes (4/4 tests, 15 assertions)
- [x] Verify submitter container starts and connects to both Ethereum
and DataHaven
- [x] Verify `ExternalValidatorsSet` event is observed on DataHaven
- [x] Verify submitter container is cleaned up after the test
- [x] Verify Charlie and Dave appear in the final validator set
## Overview
Implements deterministic weighted-stake-based validator selection in
`DataHavenServiceManager`, building on the era-targeting submitter model
from PR #433. Previously, `buildNewValidatorSetMessage()` forwarded all
registered operators in arbitrary membership order with no stake-based
ranking, meaning high-stake operators could be displaced by lower-stake
ones when downstream caps applied. This PR fixes that by computing a
weighted stake score per operator and selecting the top-32 candidates
before bridging the set to DataHaven.
Spec: `specs/validator-set-selection/validator-set-selection.md`
## Contract Changes (`DataHavenServiceManager.sol`)
**New state:**
- `MAX_ACTIVE_VALIDATORS = 32` — cap on the outbound validator set
- `mapping(IStrategy => uint96) public strategiesAndMultipliers` —
per-strategy weight used in the selection formula
**Updated `buildNewValidatorSetMessage()`:**
1. Fetches allocated stake for all operators × strategies from
`AllocationManager`
2. Computes `weightedStake(op) = Σ(allocatedStake[op][j] ×
multiplier[j])` across all strategies
3. Filters operators with no solochain address mapping or zero weighted
stake
4. Runs a partial selection sort to pick the top `min(candidateCount,
32)` by descending weighted stake; ties broken by lower operator address
(deterministic)
5. Reverts with `EmptyValidatorSet()` if no eligible candidates remain
**Admin API changes:**
- `addStrategiesToValidatorsSupportedStrategies()` signature changed
from `IStrategy[]` to `IRewardsCoordinatorTypes.StrategyAndMultiplier[]`
— strategy and multiplier are stored atomically in one call, eliminating
the risk of a strategy being registered without a multiplier
- New `setStrategiesAndMultipliers(StrategyAndMultiplier[])` — updates
multiplier weights for existing strategies without touching the
EigenLayer strategy set
- New `getStrategiesAndMultipliers()` — returns all strategies with
their current multipliers
- `removeStrategiesFromValidatorsSupportedStrategies()` now cleans up
multiplier entries on removal
**New error / event:**
- `EmptyValidatorSet()` — reverts when no eligible candidates exist
- `StrategiesAndMultipliersSet(StrategyAndMultiplier[])` — emitted on
add or update of multipliers
## Tests (`ValidatorSetSelection.t.sol`)
New 552-line Foundry test suite covering all cases from the spec:
| Case |
|------|
| `addStrategies` stores multiplier atomically |
| `removeStrategies` deletes multiplier |
| `setStrategiesAndMultipliers` updates without touching the strategy
set |
| `getStrategiesAndMultipliers` returns correct pairs |
| Weighted stake computed correctly across multiple strategies |
| Operators with zero weighted stake are excluded |
| Unset multiplier treated as 0 |
| Top-32 selection when candidate count > 32 |
| All candidates included when count < 32 |
| Tie-breaking by lower operator address |
| `EmptyValidatorSet` revert when no eligible operators |
## Deploy Scripts
- **`DeployBase.s.sol`**: Sets a default multiplier of `1` for all
configured validator strategies after AVS registration via
`setStrategiesAndMultipliers`
- **New `AllocateOperatorStake.s.sol`**: Forge script that allocates
full magnitude (`1e18`) to the validator operator set for a given
operator. Must be run at least one block after `SignUpValidator` to
respect EigenLayer's allocation configuration delay.
## E2E Framework
- **`validators.ts` — `registerOperator()`**: Extended to deposit tokens
into each deployed strategy and allocate full magnitude to the DataHaven
operator set after registration. Previously operators registered without
staking, producing zero weighted stake and getting filtered out by the
new selection logic.
- **`setup-validators.ts`**: Added a stake allocation pass after the
registration loop, invoking `AllocateOperatorStake.s.sol` per validator.
- **`validator-set-update.test.ts`**: Added debug logging for
transaction receipts and the `OutboundMessageAccepted` /
`ExternalValidatorsSet` events.
- **`generated.ts`**: Regenerated contract bindings to include new
functions, events, and the `EmptyValidatorSet` error.
## ⚠️ Breaking Changes ⚠️
- `addStrategiesToValidatorsSupportedStrategies(IStrategy[])` →
`addStrategiesToValidatorsSupportedStrategies(StrategyAndMultiplier[])`:
callers must supply multipliers alongside strategies.
- Operators with zero weighted stake are no longer included in the
bridged validator set.
## Rollout Notes
1. PR #433 (era-targeting + submitter role) must be deployed first
2. Deploy this `ServiceManager` upgrade
3. Confirm `strategiesAndMultipliers` is set for all active strategies
(default multiplier `1` applied automatically by `DeployBase`)
4. Deploy the runtime cap-enforcement changes (spec section 10.2)
5. Submitter daemon requires no changes — continues submitting
`targetEra = ActiveEra + 1`
## Era-targeted validator set submission with dedicated submitter role
> **Note:** This PR includes a detailed specification at
[`specs/validator-set-submission/validator-set-submission.md`](https://github.com/datahaven-xyz/datahaven/blob/feat/validator-set-submitter/specs/validator-set-submission/validator-set-submission.md)
that covers the design rationale, submission lifecycle, era-targeting
rules, and failure modes. Reading the spec first will make the contract,
pallet, and daemon changes easier to follow.
### Summary
- Introduce a dedicated `validatorSetSubmitter` role on
`DataHavenServiceManager`, separating validator set submission authority
from the contract owner
- Replace the unscoped `sendNewValidatorSet` with
`sendNewValidatorSetForEra`, which encodes a `targetEra` into the
Snowbridge message payload
- Add server-side era validation in the `external-validators` pallet to
reject stale, duplicate, or out-of-range submissions
- Add a long-running TypeScript daemon that watches session changes and
automatically submits each era's validator set at the right time
### Contract changes (`contracts/`)
- **New `validatorSetSubmitter` storage slot** — set during `initialize`
and rotatable via `setValidatorSetSubmitter` (owner-only). The storage
gap is decremented accordingly.
- **`sendNewValidatorSet` → `sendNewValidatorSetForEra`** — accepts a
`uint64 targetEra` parameter and is restricted to
`onlyValidatorSetSubmitter` instead of `onlyOwner`.
- **`buildNewValidatorSetMessageForEra`** — the
`NewValidatorSetPayload.externalIndex` is now caller-supplied instead of
hardcoded to `0`.
- **New events** — `ValidatorSetSubmitterUpdated`,
`ValidatorSetMessageSubmitted`.
- **New error** — `OnlyValidatorSetSubmitter`.
- **New test suite** — `ValidatorSetSubmitter.t.sol` covering submitter
set/rotate, access control, era encoding, and legacy function removal.
### Pallet changes (`operator/`)
- **`validate_target_era`** in `external-validators` — enforces
`activeEra < targetEra <= activeEra + 1` and `targetEra > ExternalIndex`
(dedup guard).
- **New errors** — `TargetEraTooOld`, `TargetEraTooNew`,
`DuplicateOrStaleTargetEra`.
- **Tests** — five new test cases for era boundary conditions (next-era
acceptance, old-era rejection, too-new rejection, duplicate rejection,
genesis behavior). Existing `era_hooks_with_external_index` test updated
to use valid target eras.
- **Runtime test fixes** — `external_index: 0` → `1` in
mainnet/stagenet/testnet EigenLayer message processor tests to satisfy
the new validation.
### Validator set submitter daemon
(`test/tools/validator-set-submitter/`)
- Event-driven service that subscribes to finalized
`Session.CurrentIndex` via Polkadot-API `watchValue`.
- Submits once per era during the last session, targeting `ActiveEra +
1`.
- Tracks submitted eras to avoid duplicates; skips if `ExternalIndex`
already covers the target.
- Startup self-checks: Ethereum connectivity, DataHaven connectivity,
on-chain submitter authorization.
- Supports `--dry-run` mode and YAML configuration.
- Graceful shutdown on `SIGINT`/`SIGTERM`.
### Test & tooling updates
- **E2E test** (`validator-set-update.test.ts`) — calls
`sendNewValidatorSetForEra` with a computed `targetEra` and filters the
substrate event by `external_index`.
- **`update-validator-set.ts` script** — accepts `--target-era` flag;
defaults to era 1 for fresh networks.
- **CLI launch** — wires validator set update as an interactive step
after relayer launch.
- **`package.json`** — new `submitter` and `submitter:dry-run` scripts.
- Regenerated contract bindings, PAPI metadata, state-diff, and storage
layout snapshots.
### Test plan
- [x] `forge test` — passes, including new `ValidatorSetSubmitter.t.sol`
- [x] `cargo test` — passes, including new era-validation tests in
`external-validators`
- [x] `bun test:e2e` — validator-set-update suite passes with
era-targeted flow
- [x] Manual: run submitter daemon against local network (`bun
submitter`), verify it submits once per era at the correct session
## ⚠️ Breaking Changes ⚠️
- **`sendNewValidatorSet` removed** — replaced by
`sendNewValidatorSetForEra(uint64 targetEra, ...)`. Callers must now
supply a `targetEra` parameter.
- **Access control changed** — validator set submission is now
restricted to the `validatorSetSubmitter` role instead of the contract
`owner`. The submitter address is set during `initialize` and rotatable
via `setValidatorSetSubmitter` (owner-only).
- **`external-validators` pallet now validates `targetEra`** — messages
with a stale, duplicate, or out-of-range `external_index` are rejected
on-chain. Existing integrations sending `external_index: 0` will fail
validation.
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
## Summary
Reorganizes the test directory structure for better clarity and
maintainability:
- **Rename `test/datahaven/` → `test/moonwall/`**: Clearly identifies
these as Moonwall single-node tests
- **Move `test/framework/` → `test/e2e/framework/`**: Groups e2e test
utilities under a dedicated folder
- **Move `test/suites/` → `test/e2e/suites/`**: Groups e2e test suites
with the framework
- **Add `test/e2e/framework/validators.ts`**: Extracts validator test
helpers from utils into the e2e framework
- **Update documentation**: README.md and E2E_FRAMEWORK_OVERVIEW.md
reflect the new structure
### New Directory Structure
```
test/
├── e2e/
│ ├── suites/ # E2E test suites (Kurtosis-based)
│ └── framework/ # E2E test utilities & helpers
├── moonwall/ # Moonwall single-node tests
├── launcher/ # Network deployment tools
└── ...
```
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
