## Summary
- Add multi-environment deployment support (stagenet, testnet, mainnet)
to CLI and contracts
- Configure stagenet and testnet runtimes with correct genesis hashes
and Snowbridge Agent IDs
- Add CLI commands for BEEFY checkpoint updates and rewards origin
computation
- Add ETH validator strategies (native beacon chain ETH + LSTs) to all
config files
## Changes
### Runtime Configuration
**Stagenet Runtime:**
- Set `StagenetGenesisHash` to DataHaven stagenet genesis hash
- Configure `RewardsAgentOrigin` with computed Snowbridge Agent ID
- Add tests verifying rewards account derivation and agent ID
computation
**Testnet Runtime:**
- Set `TestnetGenesisHash` to DataHaven testnet genesis hash
- Configure `RewardsAgentOrigin` with computed Snowbridge Agent ID
- Add tests verifying rewards account derivation and agent ID
computation
The Rewards Agent ID is computed following Snowbridge's location
description pattern:
```
blake2_256(SCALE_ENCODE("GlobalConsensus", ByGenesis(genesis), "AccountKey20", rewards_account))
```
### CLI Enhancements
- All contracts subcommands (`status`, `deploy`, `verify`,
`update-metadata`) now accept `--environment` option
- Config and deployment files use environment-prefixed naming (e.g.,
`stagenet-hoodi.json`, `testnet-hoodi.json`)
- New `update-beefy-checkpoint` command that:
- Connects to a live DataHaven chain via WebSocket RPC
- Fetches all BEEFY data at the same finalized block for consistency
- Uses parallel queries with `Promise.all` for better performance
- Computes authority hashes (keccak256 of Ethereum addresses derived
from BEEFY public keys)
- Uses Snowbridge's quorum formula `n - floor((n-1)/3)` for strictly >
2/3 majority
- New `update-rewards-origin` command that computes the Snowbridge Agent
ID for the rewards pallet
- Centralized validation via `contractsPreActionHook` for all contract
commands
- Environment validation against allowlist (`stagenet`, `testnet`,
`mainnet`)
### Contract Changes
- Network validation uses explicit allowlist instead of suffix matching
- Added `initialValidatorSetId` and `nextValidatorSetId` fields to
`SnowbridgeConfig` struct
- `DeployBase.s.sol` now uses config values for validator set IDs
instead of hardcoded 0/1
- `DeployParams.s.sol` loads validator set IDs from config with
backwards compatibility
### Validator Strategies
Added ETH-equivalent strategies to allow validators to stake using
native ETH or LSTs:
**All Networks:**
- `0xbeaC0eeEeeeeEEeEeEEEEeeEEeEeeeEeeEEBEaC0` - Native beacon chain ETH
(virtual strategy)
**Hoodi Testnet:**
- `0xf8a1a66130d614c7360e868576d5e59203475fe0` - stETH
- `0x24579aD4fe83aC53546E5c2D3dF5F85D6383420d` - WETH
**Ethereum Mainnet:**
- `0x93c4b944D05dfe6df7645A86cd2206016c51564D` - stETH
- `0x1BeE69b7dFFfA4E2d53C2a2Df135C388AD25dCD2` - rETH
- `0x54945180dB7943c0ed0FEE7EdaB2Bd24620256bc` - cbETH
### Config Files
- `stagenet-hoodi.json` - Hoodi testnet with stagenet EigenLayer
addresses
- `testnet-hoodi.json` - Hoodi testnet with testnet EigenLayer addresses
- `mainnet-ethereum.json` - Ethereum mainnet with mainnet EigenLayer
addresses
- Removed `hoodi.json` (replaced by environment-prefixed files)
## Usage
```bash
# Deploy to stagenet on Hoodi
bun cli contracts deploy --chain hoodi --environment stagenet
# Update BEEFY checkpoint from live chain
bun cli contracts update-beefy-checkpoint \
--chain hoodi \
--environment stagenet \
--rpc-url wss://services.datahaven-dev.network/stagenet
# Compute rewards origin for a chain
bun cli contracts update-rewards-origin \
--chain hoodi \
--environment stagenet \
--rpc-url wss://services.datahaven-dev.network/stagenet
# Check deployment status
bun cli contracts status --chain hoodi --environment stagenet
```
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
# Enable AVS owner workflow
Until now, the deployer of the contracts and the owner of the deployed
contracts where the same account. Even if we allowed a different owner
to be specified, we were using the same. For this reason, a private key
was required, so after the deployment we could execute owned
transactions needed for the CLI.
In this PR we:
- Add a mechanism to the CLI to specify a different owner account other
than the deployer via `--avs-owner-address`
- Add CLI flags `--avs-owner-key` and`--execute-owner-transactions` so
account ownership vs. immediate execution is explicit and deferred. If
both previous parameters are provided, the CLI will execute the
transactions using the private key provided.
- Allow DataHaven AVS deploy scripts to toggle owner-call execution via
an env flag `TX_EXECUTION`
- Add documentation on how the new parameters work in `test/README.md`
and `test/docs/deployment.md`.
---------
Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com>
Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
## Summary
This PR fixes several issues with the CLI deploy-contracts command to
properly support local Anvil deployments and improves the overall
contract deployment workflow.
### Key fixes:
- Add support for anvil chain in the CLI deploy contracts command
- Rename PRIVATE_KEY to DEPLOYER_PRIVATE_KEY for consistency and clarity
across the deployment flow
- Fix EigenLayer contract status display for local/anvil chains by
reading addresses from the deployments file instead of config
- Fix runShellCommandWithLogger to properly throw errors on command
failure
- Correct totalSteps in DeployTestnet.s.sol from 2 to 4
### Housekeeping:
- Update .gitignore to ignore the entire broadcast/ folder
(autogenerated Foundry artifacts)
- Streamline contracts/README.md with clearer structure and deployment
instructions
## Summary
This PR introduces support for deploying Datahaven contracts to
different chains (hoodi, holesky, mainnet), as well as a new cli command
to manage this deployment separately from the regular deployment, while
maintaining compatibility with it.
#### New CLI command
- **`bun cli contracts deploy`** - Deploy contracts to supported chains
(Hoodi, Holesky, Mainnet)
- **`bun cli contracts status`** - Check deployment configuration and
status
- **`bun cli contracts verify`** - Verify contracts on block explorers
- Commands need the chain parameter: `--chain <hoodi | holesky |
mainnet>`
- Right now only `hoodi` and `holesky` are supported
### Deployment
#### Hoodi & Holesky Network Support
- Added **DeployBase.s.sol** as common ground for
**DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing).
- **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed
EigenLayer contract addresses to reference.
- **Holesky configuration** (`contracts/config/hoodi.json`) with
deployed EigenLayer contract addresses to reference.
#### Contracts being deployed
- **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry
- **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent
- **EigenLayer**: References existing deployed contracts (not
re-deployed)
#### Deployment files
When the deployment is done, a new file under `contracts/deployments` is
generated with the addresses of the deployed contracts, for each chain
(it will be overriden per chain if run multiple times). So we would have
one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses
of the deployed contracts for reference and for later verification.
#### Todo
- [x] Test compatibility with existing `bun cli launch` and `bun cli
deploy` commands
#### For follow-up PRs
- Fix verification issue with `foundry verify-contracts` when specifying
the `chain` or `chain-id` parameter, needed for hoodi
(https://github.com/foundry-rs/foundry/issues/7466).
- Add `redeploy` feature to only override implementation contract and
leave the proxy address untouched
## Usage Examples
```bash
# Deploy to Hoodi network
bun cli contracts deploy --chain hoodi
# Check deployment status
bun cli contracts status --chain hoodi
# Verify contracts on block explorer
bun cli contracts verify --chain hoodi
```
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **New Features**
* Added deployment and configuration support for new networks "hoodi"
and "holesky", including new configuration and deployment files.
* Introduced a CLI tool for managing contract deployments, status
checks, and verification across supported chains.
* Added example environment configuration and comprehensive deployment
documentation.
* Enabled contract verification and status reporting via the CLI with
support for block explorer integration.
* **Improvements**
* Refactored deployment scripts for modularity, supporting both local
and testnet environments.
* Centralized and extended configuration loading to support additional
contract addresses and network parameters.
* Enhanced deployment utilities and typings to support multi-network
deployments.
* **Bug Fixes**
* Improved input validation and error handling in CLI commands and
deployment scripts.
* Added explicit handling for zero address in operator strategy
retrieval.
* **Chores**
* Updated documentation and configuration templates for easier
onboarding and deployment management.
* Improved logging and output formatting for deployment and verification
processes.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
---------
Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com>
Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
