datahaven/contracts/script/deploy/DeployLocal.s.sol

669 lines
28 KiB
Solidity
Raw Permalink Normal View History

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.27;
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
import {DeployBase, StrategyInfo, ServiceManagerInitParams} from "./DeployBase.s.sol";
// Snowbridge imports for function signatures
import {BeefyClient} from "snowbridge/src/BeefyClient.sol";
import {AgentExecutor} from "snowbridge/src/AgentExecutor.sol";
import {IGatewayV2} from "snowbridge/src/v2/IGateway.sol";
// Logging import
import {Logging} from "../utils/Logging.sol";
import {Accounts} from "../utils/Accounts.sol";
import {ValidatorsUtils} from "../utils/ValidatorsUtils.sol";
// Snowbridge imports
import {Gateway} from "snowbridge/src/Gateway.sol";
import {IGatewayV2} from "snowbridge/src/v2/IGateway.sol";
import {GatewayProxy} from "snowbridge/src/GatewayProxy.sol";
import {AgentExecutor} from "snowbridge/src/AgentExecutor.sol";
import {Agent} from "snowbridge/src/Agent.sol";
import {Initializer} from "snowbridge/src/Initializer.sol";
import {OperatingMode} from "snowbridge/src/types/Common.sol";
import {ud60x18} from "snowbridge/lib/prb-math/src/UD60x18.sol";
import {BeefyClient} from "snowbridge/src/BeefyClient.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// DataHaven imports for function signatures
import {VetoableSlasher} from "../../src/middleware/VetoableSlasher.sol";
import {RewardsRegistry} from "../../src/middleware/RewardsRegistry.sol";
// Additional imports specific to local deployment
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
ERC20PresetFixedSupply
} from "@openzeppelin/contracts/token/ERC20/presets/ERC20PresetFixedSupply.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ProxyAdmin} from "@openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol";
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
ITransparentUpgradeableProxy
} from "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol";
import {
TransparentUpgradeableProxy
} from "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol";
import {UpgradeableBeacon} from "@openzeppelin/contracts/proxy/beacon/UpgradeableBeacon.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// EigenLayer core contract imports for implementation declarations
import {AllocationManager} from "eigenlayer-contracts/src/contracts/core/AllocationManager.sol";
import {AVSDirectory} from "eigenlayer-contracts/src/contracts/core/AVSDirectory.sol";
import {DelegationManager} from "eigenlayer-contracts/src/contracts/core/DelegationManager.sol";
import {RewardsCoordinator} from "eigenlayer-contracts/src/contracts/core/RewardsCoordinator.sol";
import {StrategyManager} from "eigenlayer-contracts/src/contracts/core/StrategyManager.sol";
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
PermissionController
} from "eigenlayer-contracts/src/contracts/permissions/PermissionController.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
IAllocationManagerTypes
} from "eigenlayer-contracts/src/contracts/interfaces/IAllocationManager.sol";
import {IETHPOSDeposit} from "eigenlayer-contracts/src/contracts/interfaces/IETHPOSDeposit.sol";
import {
IRewardsCoordinator,
IRewardsCoordinatorTypes
} from "eigenlayer-contracts/src/contracts/interfaces/IRewardsCoordinator.sol";
import {IStrategy} from "eigenlayer-contracts/src/contracts/interfaces/IStrategy.sol";
import {EigenStrategy} from "eigenlayer-contracts/src/contracts/strategies/EigenStrategy.sol";
import {PauserRegistry} from "eigenlayer-contracts/src/contracts/permissions/PauserRegistry.sol";
import {EigenPod} from "eigenlayer-contracts/src/contracts/pods/EigenPod.sol";
import {EigenPodManager} from "eigenlayer-contracts/src/contracts/pods/EigenPodManager.sol";
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
StrategyBaseTVLLimits
} from "eigenlayer-contracts/src/contracts/strategies/StrategyBaseTVLLimits.sol";
import {EmptyContract} from "eigenlayer-contracts/src/test/mocks/EmptyContract.sol";
import {DataHavenServiceManager} from "../../src/DataHavenServiceManager.sol";
import {VetoableSlasher} from "../../src/middleware/VetoableSlasher.sol";
import {RewardsRegistry} from "../../src/middleware/RewardsRegistry.sol";
import {IRewardsRegistry} from "../../src/interfaces/IRewardsRegistry.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
/**
* @title DeployLocal
* @notice Deployment script for local development (anvil) - deploys full EigenLayer infrastructure
*/
contract DeployLocal is DeployBase {
// Local-specific EigenLayer Contract declarations
EmptyContract public emptyContract;
RewardsCoordinator public rewardsCoordinatorImplementation;
PermissionController public permissionControllerImplementation;
AllocationManager public allocationManagerImplementation;
DelegationManager public delegationImplementation;
StrategyManager public strategyManagerImplementation;
AVSDirectory public avsDirectoryImplementation;
EigenPodManager public eigenPodManagerImplementation;
UpgradeableBeacon public eigenPodBeacon;
EigenPod public eigenPodImplementation;
StrategyBaseTVLLimits public baseStrategyImplementation;
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
StrategyInfo[] public deployedStrategies;
IStrategy public eigenStrategy;
// EigenLayer required semver
string public constant SEMVER = "v1.0.0";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function run() public {
totalSteps = 4; // Total major deployment steps for local
_executeSharedDeployment();
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Implementation of abstract functions from DeployBase
function _getNetworkName() internal pure override returns (string memory) {
return "anvil";
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _getDeploymentMode() internal pure override returns (string memory) {
return "LOCAL";
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _setupEigenLayerContracts(
EigenLayerConfig memory eigenLayerConfig
) internal override returns (ProxyAdmin) {
Logging.logHeader("EIGENLAYER CORE CONTRACTS DEPLOYMENT");
Logging.logInfo("Deploying core infrastructure contracts");
// Deploy proxy admin for ability to upgrade proxy contracts
vm.broadcast(_deployerPrivateKey);
ProxyAdmin proxyAdmin = new ProxyAdmin();
Logging.logContractDeployed("ProxyAdmin", address(proxyAdmin));
// Deploy pauser registry
PauserRegistry pauserRegistry = _deployPauserRegistry(eigenLayerConfig);
Logging.logContractDeployed("PauserRegistry", address(pauserRegistry));
// Deploy empty contract to use as initial implementation for proxies
vm.broadcast(_deployerPrivateKey);
emptyContract = new EmptyContract();
Logging.logContractDeployed("EmptyContract", address(emptyContract));
// Deploy proxies that will point to implementations
Logging.logSection("Deploying Proxy Contracts");
_deployProxies(proxyAdmin);
Logging.logStep("Initial proxies deployed successfully");
vm.broadcast(_deployerPrivateKey);
eigenStrategy =
IStrategy(address(new EigenStrategy(strategyManager, pauserRegistry, SEMVER)));
Logging.logContractDeployed("EigenStrategy", address(eigenStrategy));
// Setup ETH2 deposit contract for EigenPod functionality
ethPOSDeposit = IETHPOSDeposit(getETHPOSDepositAddress());
Logging.logContractDeployed("ETHPOSDeposit", address(ethPOSDeposit));
// Deploy EigenPod implementation and beacon
vm.broadcast(_deployerPrivateKey);
eigenPodImplementation = new EigenPod(ethPOSDeposit, eigenPodManager, SEMVER);
vm.broadcast(_deployerPrivateKey);
eigenPodBeacon = new UpgradeableBeacon(address(eigenPodImplementation));
Logging.logContractDeployed("EigenPod Implementation", address(eigenPodImplementation));
Logging.logContractDeployed("EigenPod Beacon", address(eigenPodBeacon));
// Deploy implementation contracts
Logging.logSection("Deploying Implementation Contracts");
_deployImplementations(eigenLayerConfig, pauserRegistry);
Logging.logStep("Implementation contracts deployed successfully");
// Upgrade proxies to point to implementations and initialise
Logging.logSection("Initializing Contracts");
_upgradeAndInitializeProxies(eigenLayerConfig, proxyAdmin);
Logging.logStep("Proxies upgraded and initialized successfully");
// Deploy strategy implementation and create strategy proxies
Logging.logSection("Deploying Strategy Contracts");
_deployStrategies(pauserRegistry, proxyAdmin);
Logging.logStep("Strategy contracts deployed successfully");
// Transfer ownership of core contracts
vm.broadcast(_deployerPrivateKey);
proxyAdmin.transferOwnership(eigenLayerConfig.executorMultisig);
vm.broadcast(_deployerPrivateKey);
eigenPodBeacon.transferOwnership(eigenLayerConfig.executorMultisig);
Logging.logStep("Ownership transferred to multisig");
Logging.logFooter();
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
return proxyAdmin;
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _createServiceManagerProxy(
DataHavenServiceManager implementation,
ProxyAdmin proxyAdmin,
ServiceManagerInitParams memory params
) internal override returns (DataHavenServiceManager) {
// Prepare strategies for service manager (local deployment has deployed strategies)
_prepareStrategiesForServiceManager(params);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
vm.broadcast(_deployerPrivateKey);
bytes memory initData = abi.encodeWithSelector(
DataHavenServiceManager.initialise.selector,
params.avsOwner,
params.rewardsInitiator,
params.validatorsStrategies,
params.gateway
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
TransparentUpgradeableProxy proxy =
new TransparentUpgradeableProxy(address(implementation), address(proxyAdmin), initData);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
return DataHavenServiceManager(address(proxy));
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _outputDeployedAddresses(
BeefyClient beefyClient,
AgentExecutor agentExecutor,
IGatewayV2 gateway,
DataHavenServiceManager serviceManager,
DataHavenServiceManager serviceManagerImplementation,
VetoableSlasher vetoableSlasher,
RewardsRegistry rewardsRegistry,
address rewardsAgent
) internal override {
Logging.logHeader("DEPLOYMENT SUMMARY");
Logging.logSection("Snowbridge Contracts + Rewards Agent");
Logging.logContractDeployed("BeefyClient", address(beefyClient));
Logging.logContractDeployed("AgentExecutor", address(agentExecutor));
Logging.logContractDeployed("Gateway", address(gateway));
Logging.logContractDeployed("RewardsAgent", rewardsAgent);
Logging.logSection("DataHaven Contracts");
Logging.logContractDeployed("ServiceManager", address(serviceManager));
Logging.logContractDeployed("VetoableSlasher", address(vetoableSlasher));
Logging.logContractDeployed("RewardsRegistry", address(rewardsRegistry));
Logging.logSection("EigenLayer Core Contracts");
Logging.logContractDeployed("DelegationManager", address(delegation));
Logging.logContractDeployed("StrategyManager", address(strategyManager));
Logging.logContractDeployed("AVSDirectory", address(avsDirectory));
Logging.logContractDeployed("EigenPodManager", address(eigenPodManager));
Logging.logContractDeployed("EigenPodBeacon", address(eigenPodBeacon));
Logging.logContractDeployed("RewardsCoordinator", address(rewardsCoordinator));
Logging.logContractDeployed("AllocationManager", address(allocationManager));
Logging.logContractDeployed("EigenStrategy", address(eigenStrategy));
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
Logging.logContractDeployed("PermissionController", address(permissionController));
Logging.logContractDeployed("ETHPOSDeposit", address(ethPOSDeposit));
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
Logging.logSection("Strategy Contracts");
Logging.logContractDeployed(
"BaseStrategyImplementation", address(baseStrategyImplementation)
);
for (uint256 i = 0; i < deployedStrategies.length; i++) {
Logging.logContractDeployed(
string.concat("DeployedStrategy", vm.toString(i)), deployedStrategies[i].address_
);
}
Logging.logFooter();
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Write to deployment file for future reference
string memory network = _getNetworkName();
string memory deploymentPath =
string.concat(vm.projectRoot(), "/deployments/", network, ".json");
// Create directory if it doesn't exist
vm.createDir(string.concat(vm.projectRoot(), "/deployments"), true);
// Create JSON with deployed addresses
string memory json = "{";
json = string.concat(json, '"network": "', network, '",');
// Snowbridge contracts
json = string.concat(json, '"BeefyClient": "', vm.toString(address(beefyClient)), '",');
json = string.concat(json, '"AgentExecutor": "', vm.toString(address(agentExecutor)), '",');
json = string.concat(json, '"Gateway": "', vm.toString(address(gateway)), '",');
json =
string.concat(json, '"ServiceManager": "', vm.toString(address(serviceManager)), '",');
json = string.concat(
json,
'"ServiceManagerImplementation": "',
vm.toString(address(serviceManagerImplementation)),
'",'
);
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
json = string.concat(
json, '"VetoableSlasher": "', vm.toString(address(vetoableSlasher)), '",'
);
json = string.concat(
json, '"RewardsRegistry": "', vm.toString(address(rewardsRegistry)), '",'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, '"RewardsAgent": "', vm.toString(rewardsAgent), '",');
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// EigenLayer contracts
json = string.concat(json, '"DelegationManager": "', vm.toString(address(delegation)), '",');
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
json = string.concat(
json, '"StrategyManager": "', vm.toString(address(strategyManager)), '",'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, '"AVSDirectory": "', vm.toString(address(avsDirectory)), '",');
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
json = string.concat(
json, '"EigenPodManager": "', vm.toString(address(eigenPodManager)), '",'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json =
string.concat(json, '"EigenPodBeacon": "', vm.toString(address(eigenPodBeacon)), '",');
json = string.concat(
json, '"RewardsCoordinator": "', vm.toString(address(rewardsCoordinator)), '",'
);
json = string.concat(
json, '"AllocationManager": "', vm.toString(address(allocationManager)), '",'
);
json = string.concat(
json, '"PermissionController": "', vm.toString(address(permissionController)), '",'
);
json = string.concat(json, '"ETHPOSDeposit": "', vm.toString(address(ethPOSDeposit)), '",');
json = string.concat(
json,
'"BaseStrategyImplementation": "',
vm.toString(address(baseStrategyImplementation)),
'"'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Add strategies with token information
if (deployedStrategies.length > 0) {
json = string.concat(json, ",");
json = string.concat(json, '"DeployedStrategies": [');
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
for (uint256 i = 0; i < deployedStrategies.length; i++) {
json = string.concat(json, "{");
json = string.concat(
json, '"address": "', vm.toString(deployedStrategies[i].address_), '",'
);
json = string.concat(
json,
'"underlyingToken": "',
vm.toString(deployedStrategies[i].underlyingToken),
'",'
);
json = string.concat(
json, '"tokenCreator": "', vm.toString(deployedStrategies[i].tokenCreator), '"'
);
json = string.concat(json, "}");
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Add comma if not the last element
if (i < deployedStrategies.length - 1) {
json = string.concat(json, ",");
}
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, "]");
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, "}");
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Write to file
vm.writeFile(deploymentPath, json);
Logging.logInfo(string.concat("Deployment info saved to: ", deploymentPath));
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// LOCAL-SPECIFIC FUNCTIONS
function _prepareStrategiesForServiceManager(
ServiceManagerInitParams memory params
) internal view {
if (params.validatorsStrategies.length == 0) {
params.validatorsStrategies = new address[](deployedStrategies.length);
for (uint256 i = 0; i < deployedStrategies.length; i++) {
params.validatorsStrategies[i] = deployedStrategies[i].address_;
}
}
}
function _deployProxies(
ProxyAdmin proxyAdmin
) internal {
// Deploy proxies with empty implementation initially
vm.broadcast(_deployerPrivateKey);
delegation = DelegationManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("DelegationManager Proxy", address(delegation));
vm.broadcast(_deployerPrivateKey);
strategyManager = StrategyManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("StrategyManager Proxy", address(strategyManager));
vm.broadcast(_deployerPrivateKey);
avsDirectory = AVSDirectory(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("AVSDirectory Proxy", address(avsDirectory));
vm.broadcast(_deployerPrivateKey);
eigenPodManager = EigenPodManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("EigenPodManager Proxy", address(eigenPodManager));
vm.broadcast(_deployerPrivateKey);
rewardsCoordinator = RewardsCoordinator(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("RewardsCoordinator Proxy", address(rewardsCoordinator));
vm.broadcast(_deployerPrivateKey);
allocationManager = AllocationManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("AllocationManager Proxy", address(allocationManager));
vm.broadcast(_deployerPrivateKey);
permissionController = PermissionController(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("PermissionController Proxy", address(permissionController));
}
function _deployImplementations(
EigenLayerConfig memory config,
PauserRegistry pauserRegistry
) internal {
// Deploy implementation contracts
vm.broadcast(_deployerPrivateKey);
delegationImplementation = new DelegationManager(
strategyManager,
eigenPodManager,
allocationManager,
pauserRegistry,
permissionController,
config.minWithdrawalDelayBlocks,
SEMVER
);
Logging.logContractDeployed(
"DelegationManager Implementation", address(delegationImplementation)
);
vm.broadcast(_deployerPrivateKey);
strategyManagerImplementation =
new StrategyManager(allocationManager, delegation, pauserRegistry, SEMVER);
Logging.logContractDeployed(
"StrategyManager Implementation", address(strategyManagerImplementation)
);
vm.broadcast(_deployerPrivateKey);
avsDirectoryImplementation = new AVSDirectory(delegation, pauserRegistry, SEMVER);
Logging.logContractDeployed(
"AVSDirectory Implementation", address(avsDirectoryImplementation)
);
vm.broadcast(_deployerPrivateKey);
eigenPodManagerImplementation =
new EigenPodManager(ethPOSDeposit, eigenPodBeacon, delegation, pauserRegistry, SEMVER);
Logging.logContractDeployed(
"EigenPodManager Implementation", address(eigenPodManagerImplementation)
);
vm.broadcast(_deployerPrivateKey);
rewardsCoordinatorImplementation = new RewardsCoordinator(
IRewardsCoordinatorTypes.RewardsCoordinatorConstructorParams(
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
delegation,
strategyManager,
allocationManager,
pauserRegistry,
permissionController,
config.calculationIntervalSeconds,
config.maxRewardsDuration,
config.maxRetroactiveLength,
config.maxFutureLength,
config.genesisRewardsTimestamp,
SEMVER
)
);
Logging.logContractDeployed(
"RewardsCoordinator Implementation", address(rewardsCoordinatorImplementation)
);
vm.broadcast(_deployerPrivateKey);
allocationManagerImplementation = new AllocationManager(
delegation,
eigenStrategy,
pauserRegistry,
permissionController,
config.deallocationDelay,
config.allocationConfigurationDelay,
SEMVER
);
Logging.logContractDeployed(
"AllocationManager Implementation", address(allocationManagerImplementation)
);
vm.broadcast(_deployerPrivateKey);
permissionControllerImplementation = new PermissionController(SEMVER);
Logging.logContractDeployed(
"PermissionController Implementation", address(permissionControllerImplementation)
);
}
function _upgradeAndInitializeProxies(
EigenLayerConfig memory config,
ProxyAdmin proxyAdmin
) internal {
// Initialize DelegationManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(delegation))),
address(delegationImplementation),
abi.encodeWithSelector(
DelegationManager.initialize.selector, config.delegationInitPausedStatus
)
);
Logging.logStep("DelegationManager initialized");
// Initialize StrategyManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(strategyManager))),
address(strategyManagerImplementation),
abi.encodeWithSelector(
StrategyManager.initialize.selector,
config.executorMultisig,
config.operationsMultisig,
config.strategyManagerInitPausedStatus
)
);
Logging.logStep("StrategyManager initialized");
// Initialize AVSDirectory
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(avsDirectory))),
address(avsDirectoryImplementation),
abi.encodeWithSelector(
AVSDirectory.initialize.selector,
config.executorMultisig,
0 // Initial paused status
)
);
Logging.logStep("AVSDirectory initialized");
// Initialize EigenPodManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(eigenPodManager))),
address(eigenPodManagerImplementation),
abi.encodeWithSelector(
EigenPodManager.initialize.selector,
config.executorMultisig,
config.eigenPodManagerInitPausedStatus
)
);
Logging.logStep("EigenPodManager initialized");
// Initialize RewardsCoordinator
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(rewardsCoordinator))),
address(rewardsCoordinatorImplementation),
abi.encodeWithSelector(
RewardsCoordinator.initialize.selector,
config.executorMultisig,
config.rewardsCoordinatorInitPausedStatus,
config.rewardsUpdater,
config.activationDelay,
config.globalCommissionBips
)
);
Logging.logStep("RewardsCoordinator initialized");
// Initialize AllocationManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(allocationManager))),
address(allocationManagerImplementation),
abi.encodeWithSelector(
AllocationManager.initialize.selector, config.allocationManagerInitPausedStatus
)
);
Logging.logStep("AllocationManager initialized");
// Initialize PermissionController (no initialization function)
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgrade(
ITransparentUpgradeableProxy(payable(address(permissionController))),
address(permissionControllerImplementation)
);
Logging.logStep("PermissionController upgraded");
}
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
function _deployStrategies(
PauserRegistry pauserRegistry,
ProxyAdmin proxyAdmin
) internal {
// Deploy base strategy implementation
vm.broadcast(_deployerPrivateKey);
baseStrategyImplementation =
new StrategyBaseTVLLimits(strategyManager, pauserRegistry, SEMVER);
Logging.logContractDeployed("Strategy Implementation", address(baseStrategyImplementation));
// Create default test token and strategy if needed
// In a production environment, this would be replaced with actual token addresses.
if (block.chainid != 1) {
// We mint tokens to the operator account so that it then has a balance to deposit as stake.
vm.broadcast(_deployerPrivateKey);
address testToken =
address(new ERC20PresetFixedSupply("TestToken", "TEST", 1000000 ether, _operator));
Logging.logContractDeployed("TestToken", testToken);
// Create strategy for test token
vm.broadcast(_deployerPrivateKey);
StrategyBaseTVLLimits strategy = StrategyBaseTVLLimits(
address(
new TransparentUpgradeableProxy(
address(baseStrategyImplementation),
address(proxyAdmin),
abi.encodeWithSelector(
StrategyBaseTVLLimits.initialize.selector,
1000000 ether, // maxPerDeposit
10000000 ether, // maxDeposits
IERC20(testToken)
)
)
)
);
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
// Store the strategy with its token information
deployedStrategies.push(
StrategyInfo({
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
address_: address(strategy), underlyingToken: testToken, tokenCreator: _operator
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
})
);
Logging.logContractDeployed("Test Strategy", address(strategy));
}
// Whitelist strategies in the strategy manager
IStrategy[] memory strategies = new IStrategy[](deployedStrategies.length);
for (uint256 i = 0; i < deployedStrategies.length; i++) {
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
strategies[i] = IStrategy(deployedStrategies[i].address_);
}
vm.broadcast(_operationsMultisigPrivateKey);
strategyManager.addStrategiesToDepositWhitelist(strategies);
}
function _deployPauserRegistry(
EigenLayerConfig memory config
) internal returns (PauserRegistry) {
// Use the array of pauser addresses directly from the config
vm.broadcast(_deployerPrivateKey);
return new PauserRegistry(config.pauserAddresses, config.unpauserAddress);
}
function _prepareStrategiesForServiceManager(
AVSConfig memory config,
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
StrategyInfo[] memory strategies
) internal pure {
if (config.validatorsStrategies.length == 0) {
config.validatorsStrategies = new address[](strategies.length);
for (uint256 i = 0; i < strategies.length; i++) {
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
config.validatorsStrategies[i] = strategies[i].address_;
}
}
}
}