datahaven/contracts/script/deploy/DeployLocal.s.sol

677 lines
28 KiB
Solidity
Raw Permalink Normal View History

// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.27;
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
import {DeployBase, StrategyInfo, ServiceManagerInitParams} from "./DeployBase.s.sol";
// Snowbridge imports for function signatures
import {BeefyClient} from "snowbridge/src/BeefyClient.sol";
import {AgentExecutor} from "snowbridge/src/AgentExecutor.sol";
import {IGatewayV2} from "snowbridge/src/v2/IGateway.sol";
// Logging import
import {Logging} from "../utils/Logging.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Additional imports specific to local deployment
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
ERC20PresetFixedSupply
} from "@openzeppelin/contracts/token/ERC20/presets/ERC20PresetFixedSupply.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
2026-01-12 15:55:46 +00:00
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ProxyAdmin} from "@openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol";
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
ITransparentUpgradeableProxy
} from "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol";
import {
TransparentUpgradeableProxy
} from "@openzeppelin/contracts/proxy/transparent/TransparentUpgradeableProxy.sol";
import {UpgradeableBeacon} from "@openzeppelin/contracts/proxy/beacon/UpgradeableBeacon.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// EigenLayer core contract imports for implementation declarations
import {AllocationManager} from "eigenlayer-contracts/src/contracts/core/AllocationManager.sol";
import {AVSDirectory} from "eigenlayer-contracts/src/contracts/core/AVSDirectory.sol";
import {DelegationManager} from "eigenlayer-contracts/src/contracts/core/DelegationManager.sol";
import {RewardsCoordinator} from "eigenlayer-contracts/src/contracts/core/RewardsCoordinator.sol";
import {StrategyManager} from "eigenlayer-contracts/src/contracts/core/StrategyManager.sol";
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
PermissionController
} from "eigenlayer-contracts/src/contracts/permissions/PermissionController.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
import {IETHPOSDeposit} from "eigenlayer-contracts/src/contracts/interfaces/IETHPOSDeposit.sol";
import {
IRewardsCoordinatorTypes
} from "eigenlayer-contracts/src/contracts/interfaces/IRewardsCoordinator.sol";
import {IStrategy} from "eigenlayer-contracts/src/contracts/interfaces/IStrategy.sol";
import {EigenStrategy} from "eigenlayer-contracts/src/contracts/strategies/EigenStrategy.sol";
import {PauserRegistry} from "eigenlayer-contracts/src/contracts/permissions/PauserRegistry.sol";
import {EigenPod} from "eigenlayer-contracts/src/contracts/pods/EigenPod.sol";
import {EigenPodManager} from "eigenlayer-contracts/src/contracts/pods/EigenPodManager.sol";
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
import {
StrategyBaseTVLLimits
} from "eigenlayer-contracts/src/contracts/strategies/StrategyBaseTVLLimits.sol";
import {EmptyContract} from "eigenlayer-contracts/src/test/mocks/EmptyContract.sol";
import {DataHavenServiceManager} from "../../src/DataHavenServiceManager.sol";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
/**
* @title DeployLocal
* @notice Deployment script for local development (anvil) - deploys full EigenLayer infrastructure
*/
contract DeployLocal is DeployBase {
2026-01-12 15:55:46 +00:00
using SafeERC20 for IERC20;
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Local-specific EigenLayer Contract declarations
EmptyContract public emptyContract;
RewardsCoordinator public rewardsCoordinatorImplementation;
PermissionController public permissionControllerImplementation;
AllocationManager public allocationManagerImplementation;
DelegationManager public delegationImplementation;
StrategyManager public strategyManagerImplementation;
AVSDirectory public avsDirectoryImplementation;
EigenPodManager public eigenPodManagerImplementation;
UpgradeableBeacon public eigenPodBeacon;
EigenPod public eigenPodImplementation;
StrategyBaseTVLLimits public baseStrategyImplementation;
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
StrategyInfo[] public deployedStrategies;
IStrategy public eigenStrategy;
// EigenLayer required semver
string public constant SEMVER = "v1.0.0";
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function run() public {
totalSteps = 4; // Total major deployment steps for local
_executeSharedDeployment();
2026-01-12 15:55:46 +00:00
// Fund ServiceManager with tokens for rewards distribution (local only)
_fundServiceManagerWithTokens();
}
/**
* @notice Fund the ServiceManager with tokens for rewards distribution
* @dev Only for local deployments - transfers tokens from operator to ServiceManager
*/
function _fundServiceManagerWithTokens() internal {
if (deployedStrategies.length == 0) {
Logging.logInfo("No strategies deployed, skipping ServiceManager funding");
return;
}
// Read ServiceManager address from deployments file
string memory network = _getNetworkName();
string memory deploymentPath =
string.concat(vm.projectRoot(), "/deployments/", network, ".json");
string memory json = vm.readFile(deploymentPath);
address serviceManager = vm.parseJsonAddress(json, ".ServiceManager");
// Get token address from deployed strategies
address tokenAddress = deployedStrategies[0].underlyingToken;
// Transfer 500,000 tokens (half of minted supply) to ServiceManager
uint256 fundAmount = 500000 * 1e18;
Logging.logSection("Funding ServiceManager with Reward Tokens");
vm.broadcast(_operatorPrivateKey);
IERC20(tokenAddress).safeTransfer(serviceManager, fundAmount);
Logging.logStep(
string.concat("Transferred ", vm.toString(fundAmount), " tokens to ServiceManager")
);
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Implementation of abstract functions from DeployBase
function _getNetworkName() internal pure override returns (string memory) {
return "anvil";
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _getDeploymentMode() internal pure override returns (string memory) {
return "LOCAL";
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _setupEigenLayerContracts(
EigenLayerConfig memory eigenLayerConfig
) internal override returns (ProxyAdmin) {
Logging.logHeader("EIGENLAYER CORE CONTRACTS DEPLOYMENT");
Logging.logInfo("Deploying core infrastructure contracts");
// Deploy proxy admin for ability to upgrade proxy contracts
vm.broadcast(_deployerPrivateKey);
ProxyAdmin proxyAdmin = new ProxyAdmin();
Logging.logContractDeployed("ProxyAdmin", address(proxyAdmin));
// Deploy pauser registry
PauserRegistry pauserRegistry = _deployPauserRegistry(eigenLayerConfig);
Logging.logContractDeployed("PauserRegistry", address(pauserRegistry));
// Deploy empty contract to use as initial implementation for proxies
vm.broadcast(_deployerPrivateKey);
emptyContract = new EmptyContract();
Logging.logContractDeployed("EmptyContract", address(emptyContract));
// Deploy proxies that will point to implementations
Logging.logSection("Deploying Proxy Contracts");
_deployProxies(proxyAdmin);
Logging.logStep("Initial proxies deployed successfully");
vm.broadcast(_deployerPrivateKey);
eigenStrategy =
IStrategy(address(new EigenStrategy(strategyManager, pauserRegistry, SEMVER)));
Logging.logContractDeployed("EigenStrategy", address(eigenStrategy));
// Setup ETH2 deposit contract for EigenPod functionality
ethPOSDeposit = IETHPOSDeposit(getETHPOSDepositAddress());
Logging.logContractDeployed("ETHPOSDeposit", address(ethPOSDeposit));
// Deploy EigenPod implementation and beacon
vm.broadcast(_deployerPrivateKey);
eigenPodImplementation = new EigenPod(ethPOSDeposit, eigenPodManager, SEMVER);
vm.broadcast(_deployerPrivateKey);
eigenPodBeacon = new UpgradeableBeacon(address(eigenPodImplementation));
Logging.logContractDeployed("EigenPod Implementation", address(eigenPodImplementation));
Logging.logContractDeployed("EigenPod Beacon", address(eigenPodBeacon));
// Deploy implementation contracts
Logging.logSection("Deploying Implementation Contracts");
_deployImplementations(eigenLayerConfig, pauserRegistry);
Logging.logStep("Implementation contracts deployed successfully");
refactor(contracts): Harden DataHavenServiceManager with input validation and code cleanup (#395) ## Summary - Add zero address validation across all functions that accept address parameters to prevent misconfiguration - Fix race condition in `buildNewValidatorSetMessage()` that could cause reverts during validator deregistration - Refactor contract for improved readability and reduced code duplication - Update AVS metadata URL to point to the correct hosted JSON file ## Changes ### Security & Validation - Add `ZeroAddress` error and validate all address inputs in `initialize`, `setRewardsInitiator`, `setSnowbridgeGateway`, `addValidatorToAllowlist`, `registerOperator`, and `updateSolochainAddressForValidator` - Fix race condition: filter out zero solochain addresses in `buildNewValidatorSetMessage()` to prevent reverts when a validator is mid-deregistration ### Refactoring - Replace verbose `if/revert` patterns with `require` statements for consistency - Inline single-use internal functions (`_createDataHavenOperatorSets`, `_setRewardsInitiator`) - Consolidate duplicate error types into single `ZeroAddress` error - Rename `initialise` → `initialize` to maintain consistency with the transparent upgradability pattern - Optimize validator set message encoding by removing redundant wrapper function ### Observability - Add `SolochainAddressUpdated` event for tracking validator address changes ### Cleanup - Remove unused remappings from `foundry.toml` - Fix typo in metadata description --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com>
2026-01-20 10:32:32 +00:00
// Upgrade proxies to point to implementations and initialize
Logging.logSection("Initializing Contracts");
_upgradeAndInitializeProxies(eigenLayerConfig, proxyAdmin);
Logging.logStep("Proxies upgraded and initialized successfully");
// Deploy strategy implementation and create strategy proxies
Logging.logSection("Deploying Strategy Contracts");
_deployStrategies(pauserRegistry, proxyAdmin);
Logging.logStep("Strategy contracts deployed successfully");
// Transfer ownership of core contracts
vm.broadcast(_deployerPrivateKey);
proxyAdmin.transferOwnership(eigenLayerConfig.executorMultisig);
vm.broadcast(_deployerPrivateKey);
eigenPodBeacon.transferOwnership(eigenLayerConfig.executorMultisig);
Logging.logStep("Ownership transferred to multisig");
Logging.logFooter();
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
return proxyAdmin;
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _createServiceManagerProxy(
DataHavenServiceManager implementation,
ProxyAdmin proxyAdmin,
ServiceManagerInitParams memory params
) internal override returns (DataHavenServiceManager) {
// Prepare strategies for service manager (local deployment has deployed strategies)
_prepareStrategiesForServiceManager(params);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
vm.broadcast(_deployerPrivateKey);
bytes memory initData = abi.encodeWithSelector(
refactor(contracts): Harden DataHavenServiceManager with input validation and code cleanup (#395) ## Summary - Add zero address validation across all functions that accept address parameters to prevent misconfiguration - Fix race condition in `buildNewValidatorSetMessage()` that could cause reverts during validator deregistration - Refactor contract for improved readability and reduced code duplication - Update AVS metadata URL to point to the correct hosted JSON file ## Changes ### Security & Validation - Add `ZeroAddress` error and validate all address inputs in `initialize`, `setRewardsInitiator`, `setSnowbridgeGateway`, `addValidatorToAllowlist`, `registerOperator`, and `updateSolochainAddressForValidator` - Fix race condition: filter out zero solochain addresses in `buildNewValidatorSetMessage()` to prevent reverts when a validator is mid-deregistration ### Refactoring - Replace verbose `if/revert` patterns with `require` statements for consistency - Inline single-use internal functions (`_createDataHavenOperatorSets`, `_setRewardsInitiator`) - Consolidate duplicate error types into single `ZeroAddress` error - Rename `initialise` → `initialize` to maintain consistency with the transparent upgradability pattern - Optimize validator set message encoding by removing redundant wrapper function ### Observability - Add `SolochainAddressUpdated` event for tracking validator address changes ### Cleanup - Remove unused remappings from `foundry.toml` - Fix typo in metadata description --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com>
2026-01-20 10:32:32 +00:00
DataHavenServiceManager.initialize.selector,
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
params.avsOwner,
params.rewardsInitiator,
feat: implement weighted top-32 validator selection (#443) ## Overview Implements deterministic weighted-stake-based validator selection in `DataHavenServiceManager`, building on the era-targeting submitter model from PR #433. Previously, `buildNewValidatorSetMessage()` forwarded all registered operators in arbitrary membership order with no stake-based ranking, meaning high-stake operators could be displaced by lower-stake ones when downstream caps applied. This PR fixes that by computing a weighted stake score per operator and selecting the top-32 candidates before bridging the set to DataHaven. Spec: `specs/validator-set-selection/validator-set-selection.md` ## Contract Changes (`DataHavenServiceManager.sol`) **New state:** - `MAX_ACTIVE_VALIDATORS = 32` — cap on the outbound validator set - `mapping(IStrategy => uint96) public strategiesAndMultipliers` — per-strategy weight used in the selection formula **Updated `buildNewValidatorSetMessage()`:** 1. Fetches allocated stake for all operators × strategies from `AllocationManager` 2. Computes `weightedStake(op) = Σ(allocatedStake[op][j] × multiplier[j])` across all strategies 3. Filters operators with no solochain address mapping or zero weighted stake 4. Runs a partial selection sort to pick the top `min(candidateCount, 32)` by descending weighted stake; ties broken by lower operator address (deterministic) 5. Reverts with `EmptyValidatorSet()` if no eligible candidates remain **Admin API changes:** - `addStrategiesToValidatorsSupportedStrategies()` signature changed from `IStrategy[]` to `IRewardsCoordinatorTypes.StrategyAndMultiplier[]` — strategy and multiplier are stored atomically in one call, eliminating the risk of a strategy being registered without a multiplier - New `setStrategiesAndMultipliers(StrategyAndMultiplier[])` — updates multiplier weights for existing strategies without touching the EigenLayer strategy set - New `getStrategiesAndMultipliers()` — returns all strategies with their current multipliers - `removeStrategiesFromValidatorsSupportedStrategies()` now cleans up multiplier entries on removal **New error / event:** - `EmptyValidatorSet()` — reverts when no eligible candidates exist - `StrategiesAndMultipliersSet(StrategyAndMultiplier[])` — emitted on add or update of multipliers ## Tests (`ValidatorSetSelection.t.sol`) New 552-line Foundry test suite covering all cases from the spec: | Case | |------| | `addStrategies` stores multiplier atomically | | `removeStrategies` deletes multiplier | | `setStrategiesAndMultipliers` updates without touching the strategy set | | `getStrategiesAndMultipliers` returns correct pairs | | Weighted stake computed correctly across multiple strategies | | Operators with zero weighted stake are excluded | | Unset multiplier treated as 0 | | Top-32 selection when candidate count > 32 | | All candidates included when count < 32 | | Tie-breaking by lower operator address | | `EmptyValidatorSet` revert when no eligible operators | ## Deploy Scripts - **`DeployBase.s.sol`**: Sets a default multiplier of `1` for all configured validator strategies after AVS registration via `setStrategiesAndMultipliers` - **New `AllocateOperatorStake.s.sol`**: Forge script that allocates full magnitude (`1e18`) to the validator operator set for a given operator. Must be run at least one block after `SignUpValidator` to respect EigenLayer's allocation configuration delay. ## E2E Framework - **`validators.ts` — `registerOperator()`**: Extended to deposit tokens into each deployed strategy and allocate full magnitude to the DataHaven operator set after registration. Previously operators registered without staking, producing zero weighted stake and getting filtered out by the new selection logic. - **`setup-validators.ts`**: Added a stake allocation pass after the registration loop, invoking `AllocateOperatorStake.s.sol` per validator. - **`validator-set-update.test.ts`**: Added debug logging for transaction receipts and the `OutboundMessageAccepted` / `ExternalValidatorsSet` events. - **`generated.ts`**: Regenerated contract bindings to include new functions, events, and the `EmptyValidatorSet` error. ## ⚠️ Breaking Changes ⚠️ - `addStrategiesToValidatorsSupportedStrategies(IStrategy[])` → `addStrategiesToValidatorsSupportedStrategies(StrategyAndMultiplier[])`: callers must supply multipliers alongside strategies. - Operators with zero weighted stake are no longer included in the bridged validator set. ## Rollout Notes 1. PR #433 (era-targeting + submitter role) must be deployed first 2. Deploy this `ServiceManager` upgrade 3. Confirm `strategiesAndMultipliers` is set for all active strategies (default multiplier `1` applied automatically by `DeployBase`) 4. Deploy the runtime cap-enforcement changes (spec section 10.2) 5. Submitter daemon requires no changes — continues submitting `targetEra = ActiveEra + 1`
2026-02-24 08:23:57 +00:00
params.validatorsStrategiesAndMultipliers,
feat: automated validator set submission with era targeting (#433) ## Era-targeted validator set submission with dedicated submitter role > **Note:** This PR includes a detailed specification at [`specs/validator-set-submission/validator-set-submission.md`](https://github.com/datahaven-xyz/datahaven/blob/feat/validator-set-submitter/specs/validator-set-submission/validator-set-submission.md) that covers the design rationale, submission lifecycle, era-targeting rules, and failure modes. Reading the spec first will make the contract, pallet, and daemon changes easier to follow. ### Summary - Introduce a dedicated `validatorSetSubmitter` role on `DataHavenServiceManager`, separating validator set submission authority from the contract owner - Replace the unscoped `sendNewValidatorSet` with `sendNewValidatorSetForEra`, which encodes a `targetEra` into the Snowbridge message payload - Add server-side era validation in the `external-validators` pallet to reject stale, duplicate, or out-of-range submissions - Add a long-running TypeScript daemon that watches session changes and automatically submits each era's validator set at the right time ### Contract changes (`contracts/`) - **New `validatorSetSubmitter` storage slot** — set during `initialize` and rotatable via `setValidatorSetSubmitter` (owner-only). The storage gap is decremented accordingly. - **`sendNewValidatorSet` → `sendNewValidatorSetForEra`** — accepts a `uint64 targetEra` parameter and is restricted to `onlyValidatorSetSubmitter` instead of `onlyOwner`. - **`buildNewValidatorSetMessageForEra`** — the `NewValidatorSetPayload.externalIndex` is now caller-supplied instead of hardcoded to `0`. - **New events** — `ValidatorSetSubmitterUpdated`, `ValidatorSetMessageSubmitted`. - **New error** — `OnlyValidatorSetSubmitter`. - **New test suite** — `ValidatorSetSubmitter.t.sol` covering submitter set/rotate, access control, era encoding, and legacy function removal. ### Pallet changes (`operator/`) - **`validate_target_era`** in `external-validators` — enforces `activeEra < targetEra <= activeEra + 1` and `targetEra > ExternalIndex` (dedup guard). - **New errors** — `TargetEraTooOld`, `TargetEraTooNew`, `DuplicateOrStaleTargetEra`. - **Tests** — five new test cases for era boundary conditions (next-era acceptance, old-era rejection, too-new rejection, duplicate rejection, genesis behavior). Existing `era_hooks_with_external_index` test updated to use valid target eras. - **Runtime test fixes** — `external_index: 0` → `1` in mainnet/stagenet/testnet EigenLayer message processor tests to satisfy the new validation. ### Validator set submitter daemon (`test/tools/validator-set-submitter/`) - Event-driven service that subscribes to finalized `Session.CurrentIndex` via Polkadot-API `watchValue`. - Submits once per era during the last session, targeting `ActiveEra + 1`. - Tracks submitted eras to avoid duplicates; skips if `ExternalIndex` already covers the target. - Startup self-checks: Ethereum connectivity, DataHaven connectivity, on-chain submitter authorization. - Supports `--dry-run` mode and YAML configuration. - Graceful shutdown on `SIGINT`/`SIGTERM`. ### Test & tooling updates - **E2E test** (`validator-set-update.test.ts`) — calls `sendNewValidatorSetForEra` with a computed `targetEra` and filters the substrate event by `external_index`. - **`update-validator-set.ts` script** — accepts `--target-era` flag; defaults to era 1 for fresh networks. - **CLI launch** — wires validator set update as an interactive step after relayer launch. - **`package.json`** — new `submitter` and `submitter:dry-run` scripts. - Regenerated contract bindings, PAPI metadata, state-diff, and storage layout snapshots. ### Test plan - [x] `forge test` — passes, including new `ValidatorSetSubmitter.t.sol` - [x] `cargo test` — passes, including new era-validation tests in `external-validators` - [x] `bun test:e2e` — validator-set-update suite passes with era-targeted flow - [x] Manual: run submitter daemon against local network (`bun submitter`), verify it submits once per era at the correct session ## ⚠️ Breaking Changes ⚠️ - **`sendNewValidatorSet` removed** — replaced by `sendNewValidatorSetForEra(uint64 targetEra, ...)`. Callers must now supply a `targetEra` parameter. - **Access control changed** — validator set submission is now restricted to the `validatorSetSubmitter` role instead of the contract `owner`. The submitter address is set during `initialize` and rotatable via `setValidatorSetSubmitter` (owner-only). - **`external-validators` pallet now validates `targetEra`** — messages with a stale, duplicate, or out-of-range `external_index` are rejected on-chain. Existing integrations sending `external_index: 0` will fail validation. --------- Co-authored-by: Cursor <cursoragent@cursor.com>
2026-02-20 09:31:44 +00:00
params.gateway,
params.validatorSetSubmitter
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
TransparentUpgradeableProxy proxy =
new TransparentUpgradeableProxy(address(implementation), address(proxyAdmin), initData);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
return DataHavenServiceManager(address(proxy));
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
function _outputDeployedAddresses(
BeefyClient beefyClient,
AgentExecutor agentExecutor,
IGatewayV2 gateway,
DataHavenServiceManager serviceManager,
DataHavenServiceManager serviceManagerImplementation,
address rewardsAgent
) internal override {
Logging.logHeader("DEPLOYMENT SUMMARY");
Logging.logSection("Snowbridge Contracts + Rewards Agent");
Logging.logContractDeployed("BeefyClient", address(beefyClient));
Logging.logContractDeployed("AgentExecutor", address(agentExecutor));
Logging.logContractDeployed("Gateway", address(gateway));
Logging.logContractDeployed("RewardsAgent", rewardsAgent);
Logging.logSection("DataHaven Contracts");
Logging.logContractDeployed("ServiceManager", address(serviceManager));
Logging.logSection("EigenLayer Core Contracts");
Logging.logContractDeployed("DelegationManager", address(delegation));
Logging.logContractDeployed("StrategyManager", address(strategyManager));
Logging.logContractDeployed("AVSDirectory", address(avsDirectory));
Logging.logContractDeployed("EigenPodManager", address(eigenPodManager));
Logging.logContractDeployed("EigenPodBeacon", address(eigenPodBeacon));
Logging.logContractDeployed("RewardsCoordinator", address(rewardsCoordinator));
Logging.logContractDeployed("AllocationManager", address(allocationManager));
Logging.logContractDeployed("EigenStrategy", address(eigenStrategy));
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
Logging.logContractDeployed("PermissionController", address(permissionController));
Logging.logContractDeployed("ETHPOSDeposit", address(ethPOSDeposit));
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
Logging.logSection("Strategy Contracts");
Logging.logContractDeployed(
"BaseStrategyImplementation", address(baseStrategyImplementation)
);
for (uint256 i = 0; i < deployedStrategies.length; i++) {
Logging.logContractDeployed(
string.concat("DeployedStrategy", vm.toString(i)), deployedStrategies[i].address_
);
}
Logging.logFooter();
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Write to deployment file for future reference
string memory network = _getNetworkName();
string memory deploymentPath =
string.concat(vm.projectRoot(), "/deployments/", network, ".json");
// Create directory if it doesn't exist
vm.createDir(string.concat(vm.projectRoot(), "/deployments"), true);
// Create JSON with deployed addresses
string memory json = "{";
json = string.concat(json, '"network": "', network, '",');
// Snowbridge contracts
json = string.concat(json, '"BeefyClient": "', vm.toString(address(beefyClient)), '",');
json = string.concat(json, '"AgentExecutor": "', vm.toString(address(agentExecutor)), '",');
json = string.concat(json, '"Gateway": "', vm.toString(address(gateway)), '",');
json =
string.concat(json, '"ServiceManager": "', vm.toString(address(serviceManager)), '",');
json = string.concat(
json,
'"ServiceManagerImplementation": "',
vm.toString(address(serviceManagerImplementation)),
'",'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, '"RewardsAgent": "', vm.toString(rewardsAgent), '",');
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// EigenLayer contracts
json = string.concat(json, '"DelegationManager": "', vm.toString(address(delegation)), '",');
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
json = string.concat(
json, '"StrategyManager": "', vm.toString(address(strategyManager)), '",'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, '"AVSDirectory": "', vm.toString(address(avsDirectory)), '",');
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
json = string.concat(
json, '"EigenPodManager": "', vm.toString(address(eigenPodManager)), '",'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json =
string.concat(json, '"EigenPodBeacon": "', vm.toString(address(eigenPodBeacon)), '",');
json = string.concat(
json, '"RewardsCoordinator": "', vm.toString(address(rewardsCoordinator)), '",'
);
json = string.concat(
json, '"AllocationManager": "', vm.toString(address(allocationManager)), '",'
);
json = string.concat(
json, '"PermissionController": "', vm.toString(address(permissionController)), '",'
);
json = string.concat(json, '"ETHPOSDeposit": "', vm.toString(address(ethPOSDeposit)), '",');
json = string.concat(
json,
'"BaseStrategyImplementation": "',
vm.toString(address(baseStrategyImplementation)),
'"'
);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Add strategies with token information
if (deployedStrategies.length > 0) {
json = string.concat(json, ",");
json = string.concat(json, '"DeployedStrategies": [');
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
for (uint256 i = 0; i < deployedStrategies.length; i++) {
json = string.concat(json, "{");
json = string.concat(
json, '"address": "', vm.toString(deployedStrategies[i].address_), '",'
);
json = string.concat(
json,
'"underlyingToken": "',
vm.toString(deployedStrategies[i].underlyingToken),
'",'
);
json = string.concat(
json, '"tokenCreator": "', vm.toString(deployedStrategies[i].tokenCreator), '"'
);
json = string.concat(json, "}");
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Add comma if not the last element
if (i < deployedStrategies.length - 1) {
json = string.concat(json, ",");
}
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, "]");
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
json = string.concat(json, "}");
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// Write to file
vm.writeFile(deploymentPath, json);
Logging.logInfo(string.concat("Deployment info saved to: ", deploymentPath));
}
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
// LOCAL-SPECIFIC FUNCTIONS
function _prepareStrategiesForServiceManager(
ServiceManagerInitParams memory params
) internal view {
feat: implement weighted top-32 validator selection (#443) ## Overview Implements deterministic weighted-stake-based validator selection in `DataHavenServiceManager`, building on the era-targeting submitter model from PR #433. Previously, `buildNewValidatorSetMessage()` forwarded all registered operators in arbitrary membership order with no stake-based ranking, meaning high-stake operators could be displaced by lower-stake ones when downstream caps applied. This PR fixes that by computing a weighted stake score per operator and selecting the top-32 candidates before bridging the set to DataHaven. Spec: `specs/validator-set-selection/validator-set-selection.md` ## Contract Changes (`DataHavenServiceManager.sol`) **New state:** - `MAX_ACTIVE_VALIDATORS = 32` — cap on the outbound validator set - `mapping(IStrategy => uint96) public strategiesAndMultipliers` — per-strategy weight used in the selection formula **Updated `buildNewValidatorSetMessage()`:** 1. Fetches allocated stake for all operators × strategies from `AllocationManager` 2. Computes `weightedStake(op) = Σ(allocatedStake[op][j] × multiplier[j])` across all strategies 3. Filters operators with no solochain address mapping or zero weighted stake 4. Runs a partial selection sort to pick the top `min(candidateCount, 32)` by descending weighted stake; ties broken by lower operator address (deterministic) 5. Reverts with `EmptyValidatorSet()` if no eligible candidates remain **Admin API changes:** - `addStrategiesToValidatorsSupportedStrategies()` signature changed from `IStrategy[]` to `IRewardsCoordinatorTypes.StrategyAndMultiplier[]` — strategy and multiplier are stored atomically in one call, eliminating the risk of a strategy being registered without a multiplier - New `setStrategiesAndMultipliers(StrategyAndMultiplier[])` — updates multiplier weights for existing strategies without touching the EigenLayer strategy set - New `getStrategiesAndMultipliers()` — returns all strategies with their current multipliers - `removeStrategiesFromValidatorsSupportedStrategies()` now cleans up multiplier entries on removal **New error / event:** - `EmptyValidatorSet()` — reverts when no eligible candidates exist - `StrategiesAndMultipliersSet(StrategyAndMultiplier[])` — emitted on add or update of multipliers ## Tests (`ValidatorSetSelection.t.sol`) New 552-line Foundry test suite covering all cases from the spec: | Case | |------| | `addStrategies` stores multiplier atomically | | `removeStrategies` deletes multiplier | | `setStrategiesAndMultipliers` updates without touching the strategy set | | `getStrategiesAndMultipliers` returns correct pairs | | Weighted stake computed correctly across multiple strategies | | Operators with zero weighted stake are excluded | | Unset multiplier treated as 0 | | Top-32 selection when candidate count > 32 | | All candidates included when count < 32 | | Tie-breaking by lower operator address | | `EmptyValidatorSet` revert when no eligible operators | ## Deploy Scripts - **`DeployBase.s.sol`**: Sets a default multiplier of `1` for all configured validator strategies after AVS registration via `setStrategiesAndMultipliers` - **New `AllocateOperatorStake.s.sol`**: Forge script that allocates full magnitude (`1e18`) to the validator operator set for a given operator. Must be run at least one block after `SignUpValidator` to respect EigenLayer's allocation configuration delay. ## E2E Framework - **`validators.ts` — `registerOperator()`**: Extended to deposit tokens into each deployed strategy and allocate full magnitude to the DataHaven operator set after registration. Previously operators registered without staking, producing zero weighted stake and getting filtered out by the new selection logic. - **`setup-validators.ts`**: Added a stake allocation pass after the registration loop, invoking `AllocateOperatorStake.s.sol` per validator. - **`validator-set-update.test.ts`**: Added debug logging for transaction receipts and the `OutboundMessageAccepted` / `ExternalValidatorsSet` events. - **`generated.ts`**: Regenerated contract bindings to include new functions, events, and the `EmptyValidatorSet` error. ## ⚠️ Breaking Changes ⚠️ - `addStrategiesToValidatorsSupportedStrategies(IStrategy[])` → `addStrategiesToValidatorsSupportedStrategies(StrategyAndMultiplier[])`: callers must supply multipliers alongside strategies. - Operators with zero weighted stake are no longer included in the bridged validator set. ## Rollout Notes 1. PR #433 (era-targeting + submitter role) must be deployed first 2. Deploy this `ServiceManager` upgrade 3. Confirm `strategiesAndMultipliers` is set for all active strategies (default multiplier `1` applied automatically by `DeployBase`) 4. Deploy the runtime cap-enforcement changes (spec section 10.2) 5. Submitter daemon requires no changes — continues submitting `targetEra = ActiveEra + 1`
2026-02-24 08:23:57 +00:00
if (params.validatorsStrategiesAndMultipliers.length == 0) {
IRewardsCoordinatorTypes.StrategyAndMultiplier[] memory sm =
new IRewardsCoordinatorTypes.StrategyAndMultiplier[](deployedStrategies.length);
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
for (uint256 i = 0; i < deployedStrategies.length; i++) {
feat: implement weighted top-32 validator selection (#443) ## Overview Implements deterministic weighted-stake-based validator selection in `DataHavenServiceManager`, building on the era-targeting submitter model from PR #433. Previously, `buildNewValidatorSetMessage()` forwarded all registered operators in arbitrary membership order with no stake-based ranking, meaning high-stake operators could be displaced by lower-stake ones when downstream caps applied. This PR fixes that by computing a weighted stake score per operator and selecting the top-32 candidates before bridging the set to DataHaven. Spec: `specs/validator-set-selection/validator-set-selection.md` ## Contract Changes (`DataHavenServiceManager.sol`) **New state:** - `MAX_ACTIVE_VALIDATORS = 32` — cap on the outbound validator set - `mapping(IStrategy => uint96) public strategiesAndMultipliers` — per-strategy weight used in the selection formula **Updated `buildNewValidatorSetMessage()`:** 1. Fetches allocated stake for all operators × strategies from `AllocationManager` 2. Computes `weightedStake(op) = Σ(allocatedStake[op][j] × multiplier[j])` across all strategies 3. Filters operators with no solochain address mapping or zero weighted stake 4. Runs a partial selection sort to pick the top `min(candidateCount, 32)` by descending weighted stake; ties broken by lower operator address (deterministic) 5. Reverts with `EmptyValidatorSet()` if no eligible candidates remain **Admin API changes:** - `addStrategiesToValidatorsSupportedStrategies()` signature changed from `IStrategy[]` to `IRewardsCoordinatorTypes.StrategyAndMultiplier[]` — strategy and multiplier are stored atomically in one call, eliminating the risk of a strategy being registered without a multiplier - New `setStrategiesAndMultipliers(StrategyAndMultiplier[])` — updates multiplier weights for existing strategies without touching the EigenLayer strategy set - New `getStrategiesAndMultipliers()` — returns all strategies with their current multipliers - `removeStrategiesFromValidatorsSupportedStrategies()` now cleans up multiplier entries on removal **New error / event:** - `EmptyValidatorSet()` — reverts when no eligible candidates exist - `StrategiesAndMultipliersSet(StrategyAndMultiplier[])` — emitted on add or update of multipliers ## Tests (`ValidatorSetSelection.t.sol`) New 552-line Foundry test suite covering all cases from the spec: | Case | |------| | `addStrategies` stores multiplier atomically | | `removeStrategies` deletes multiplier | | `setStrategiesAndMultipliers` updates without touching the strategy set | | `getStrategiesAndMultipliers` returns correct pairs | | Weighted stake computed correctly across multiple strategies | | Operators with zero weighted stake are excluded | | Unset multiplier treated as 0 | | Top-32 selection when candidate count > 32 | | All candidates included when count < 32 | | Tie-breaking by lower operator address | | `EmptyValidatorSet` revert when no eligible operators | ## Deploy Scripts - **`DeployBase.s.sol`**: Sets a default multiplier of `1` for all configured validator strategies after AVS registration via `setStrategiesAndMultipliers` - **New `AllocateOperatorStake.s.sol`**: Forge script that allocates full magnitude (`1e18`) to the validator operator set for a given operator. Must be run at least one block after `SignUpValidator` to respect EigenLayer's allocation configuration delay. ## E2E Framework - **`validators.ts` — `registerOperator()`**: Extended to deposit tokens into each deployed strategy and allocate full magnitude to the DataHaven operator set after registration. Previously operators registered without staking, producing zero weighted stake and getting filtered out by the new selection logic. - **`setup-validators.ts`**: Added a stake allocation pass after the registration loop, invoking `AllocateOperatorStake.s.sol` per validator. - **`validator-set-update.test.ts`**: Added debug logging for transaction receipts and the `OutboundMessageAccepted` / `ExternalValidatorsSet` events. - **`generated.ts`**: Regenerated contract bindings to include new functions, events, and the `EmptyValidatorSet` error. ## ⚠️ Breaking Changes ⚠️ - `addStrategiesToValidatorsSupportedStrategies(IStrategy[])` → `addStrategiesToValidatorsSupportedStrategies(StrategyAndMultiplier[])`: callers must supply multipliers alongside strategies. - Operators with zero weighted stake are no longer included in the bridged validator set. ## Rollout Notes 1. PR #433 (era-targeting + submitter role) must be deployed first 2. Deploy this `ServiceManager` upgrade 3. Confirm `strategiesAndMultipliers` is set for all active strategies (default multiplier `1` applied automatically by `DeployBase`) 4. Deploy the runtime cap-enforcement changes (spec section 10.2) 5. Submitter daemon requires no changes — continues submitting `targetEra = ActiveEra + 1`
2026-02-24 08:23:57 +00:00
sm[i] = IRewardsCoordinatorTypes.StrategyAndMultiplier({
strategy: IStrategy(deployedStrategies[i].address_), multiplier: 1
});
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
}
feat: implement weighted top-32 validator selection (#443) ## Overview Implements deterministic weighted-stake-based validator selection in `DataHavenServiceManager`, building on the era-targeting submitter model from PR #433. Previously, `buildNewValidatorSetMessage()` forwarded all registered operators in arbitrary membership order with no stake-based ranking, meaning high-stake operators could be displaced by lower-stake ones when downstream caps applied. This PR fixes that by computing a weighted stake score per operator and selecting the top-32 candidates before bridging the set to DataHaven. Spec: `specs/validator-set-selection/validator-set-selection.md` ## Contract Changes (`DataHavenServiceManager.sol`) **New state:** - `MAX_ACTIVE_VALIDATORS = 32` — cap on the outbound validator set - `mapping(IStrategy => uint96) public strategiesAndMultipliers` — per-strategy weight used in the selection formula **Updated `buildNewValidatorSetMessage()`:** 1. Fetches allocated stake for all operators × strategies from `AllocationManager` 2. Computes `weightedStake(op) = Σ(allocatedStake[op][j] × multiplier[j])` across all strategies 3. Filters operators with no solochain address mapping or zero weighted stake 4. Runs a partial selection sort to pick the top `min(candidateCount, 32)` by descending weighted stake; ties broken by lower operator address (deterministic) 5. Reverts with `EmptyValidatorSet()` if no eligible candidates remain **Admin API changes:** - `addStrategiesToValidatorsSupportedStrategies()` signature changed from `IStrategy[]` to `IRewardsCoordinatorTypes.StrategyAndMultiplier[]` — strategy and multiplier are stored atomically in one call, eliminating the risk of a strategy being registered without a multiplier - New `setStrategiesAndMultipliers(StrategyAndMultiplier[])` — updates multiplier weights for existing strategies without touching the EigenLayer strategy set - New `getStrategiesAndMultipliers()` — returns all strategies with their current multipliers - `removeStrategiesFromValidatorsSupportedStrategies()` now cleans up multiplier entries on removal **New error / event:** - `EmptyValidatorSet()` — reverts when no eligible candidates exist - `StrategiesAndMultipliersSet(StrategyAndMultiplier[])` — emitted on add or update of multipliers ## Tests (`ValidatorSetSelection.t.sol`) New 552-line Foundry test suite covering all cases from the spec: | Case | |------| | `addStrategies` stores multiplier atomically | | `removeStrategies` deletes multiplier | | `setStrategiesAndMultipliers` updates without touching the strategy set | | `getStrategiesAndMultipliers` returns correct pairs | | Weighted stake computed correctly across multiple strategies | | Operators with zero weighted stake are excluded | | Unset multiplier treated as 0 | | Top-32 selection when candidate count > 32 | | All candidates included when count < 32 | | Tie-breaking by lower operator address | | `EmptyValidatorSet` revert when no eligible operators | ## Deploy Scripts - **`DeployBase.s.sol`**: Sets a default multiplier of `1` for all configured validator strategies after AVS registration via `setStrategiesAndMultipliers` - **New `AllocateOperatorStake.s.sol`**: Forge script that allocates full magnitude (`1e18`) to the validator operator set for a given operator. Must be run at least one block after `SignUpValidator` to respect EigenLayer's allocation configuration delay. ## E2E Framework - **`validators.ts` — `registerOperator()`**: Extended to deposit tokens into each deployed strategy and allocate full magnitude to the DataHaven operator set after registration. Previously operators registered without staking, producing zero weighted stake and getting filtered out by the new selection logic. - **`setup-validators.ts`**: Added a stake allocation pass after the registration loop, invoking `AllocateOperatorStake.s.sol` per validator. - **`validator-set-update.test.ts`**: Added debug logging for transaction receipts and the `OutboundMessageAccepted` / `ExternalValidatorsSet` events. - **`generated.ts`**: Regenerated contract bindings to include new functions, events, and the `EmptyValidatorSet` error. ## ⚠️ Breaking Changes ⚠️ - `addStrategiesToValidatorsSupportedStrategies(IStrategy[])` → `addStrategiesToValidatorsSupportedStrategies(StrategyAndMultiplier[])`: callers must supply multipliers alongside strategies. - Operators with zero weighted stake are no longer included in the bridged validator set. ## Rollout Notes 1. PR #433 (era-targeting + submitter role) must be deployed first 2. Deploy this `ServiceManager` upgrade 3. Confirm `strategiesAndMultipliers` is set for all active strategies (default multiplier `1` applied automatically by `DeployBase`) 4. Deploy the runtime cap-enforcement changes (spec section 10.2) 5. Submitter daemon requires no changes — continues submitting `targetEra = ActiveEra + 1`
2026-02-24 08:23:57 +00:00
params.validatorsStrategiesAndMultipliers = sm;
feat: ✨ Datahaven contracts deployment on public testnet (#123) ## Summary This PR introduces support for deploying Datahaven contracts to different chains (hoodi, holesky, mainnet), as well as a new cli command to manage this deployment separately from the regular deployment, while maintaining compatibility with it. #### New CLI command - **`bun cli contracts deploy`** - Deploy contracts to supported chains (Hoodi, Holesky, Mainnet) - **`bun cli contracts status`** - Check deployment configuration and status - **`bun cli contracts verify`** - Verify contracts on block explorers - Commands need the chain parameter: `--chain <hoodi | holesky | mainnet>` - Right now only `hoodi` and `holesky` are supported ### Deployment #### Hoodi & Holesky Network Support - Added **DeployBase.s.sol** as common ground for **DeployTestnet.s.sol** (also new) and **DeployLocal.s.sol** (existing). - **Hoodi configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. - **Holesky configuration** (`contracts/config/hoodi.json`) with deployed EigenLayer contract addresses to reference. #### Contracts being deployed - **DataHaven**: ServiceManager, VetoableSlasher, RewardsRegistry - **Snowbridge**: BeefyClient, AgentExecutor, Gateway, RewardsAgent - **EigenLayer**: References existing deployed contracts (not re-deployed) #### Deployment files When the deployment is done, a new file under `contracts/deployments` is generated with the addresses of the deployed contracts, for each chain (it will be overriden per chain if run multiple times). So we would have one `anvil.json`, `hoodi.json`, `holesky.json`, etc, with the addresses of the deployed contracts for reference and for later verification. #### Todo - [x] Test compatibility with existing `bun cli launch` and `bun cli deploy` commands #### For follow-up PRs - Fix verification issue with `foundry verify-contracts` when specifying the `chain` or `chain-id` parameter, needed for hoodi (https://github.com/foundry-rs/foundry/issues/7466). - Add `redeploy` feature to only override implementation contract and leave the proxy address untouched ## Usage Examples ```bash # Deploy to Hoodi network bun cli contracts deploy --chain hoodi # Check deployment status bun cli contracts status --chain hoodi # Verify contracts on block explorer bun cli contracts verify --chain hoodi ``` <!-- This is an auto-generated comment: release notes by coderabbit.ai --> ## Summary by CodeRabbit * **New Features** * Added deployment and configuration support for new networks "hoodi" and "holesky", including new configuration and deployment files. * Introduced a CLI tool for managing contract deployments, status checks, and verification across supported chains. * Added example environment configuration and comprehensive deployment documentation. * Enabled contract verification and status reporting via the CLI with support for block explorer integration. * **Improvements** * Refactored deployment scripts for modularity, supporting both local and testnet environments. * Centralized and extended configuration loading to support additional contract addresses and network parameters. * Enhanced deployment utilities and typings to support multi-network deployments. * **Bug Fixes** * Improved input validation and error handling in CLI commands and deployment scripts. * Added explicit handling for zero address in operator strategy retrieval. * **Chores** * Updated documentation and configuration templates for easier onboarding and deployment management. * Improved logging and output formatting for deployment and verification processes. <!-- end of auto-generated comment: release notes by coderabbit.ai --> --------- Co-authored-by: Steve Degosserie <723552+stiiifff@users.noreply.github.com> Co-authored-by: Ahmad Kaouk <56095276+ahmadkaouk@users.noreply.github.com>
2025-08-21 10:02:31 +00:00
}
}
function _deployProxies(
ProxyAdmin proxyAdmin
) internal {
// Deploy proxies with empty implementation initially
vm.broadcast(_deployerPrivateKey);
delegation = DelegationManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("DelegationManager Proxy", address(delegation));
vm.broadcast(_deployerPrivateKey);
strategyManager = StrategyManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("StrategyManager Proxy", address(strategyManager));
vm.broadcast(_deployerPrivateKey);
avsDirectory = AVSDirectory(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("AVSDirectory Proxy", address(avsDirectory));
vm.broadcast(_deployerPrivateKey);
eigenPodManager = EigenPodManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("EigenPodManager Proxy", address(eigenPodManager));
vm.broadcast(_deployerPrivateKey);
rewardsCoordinator = RewardsCoordinator(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("RewardsCoordinator Proxy", address(rewardsCoordinator));
vm.broadcast(_deployerPrivateKey);
allocationManager = AllocationManager(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("AllocationManager Proxy", address(allocationManager));
vm.broadcast(_deployerPrivateKey);
permissionController = PermissionController(
address(
new TransparentUpgradeableProxy(address(emptyContract), address(proxyAdmin), "")
)
);
Logging.logContractDeployed("PermissionController Proxy", address(permissionController));
}
function _deployImplementations(
EigenLayerConfig memory config,
PauserRegistry pauserRegistry
) internal {
// Deploy implementation contracts
vm.broadcast(_deployerPrivateKey);
delegationImplementation = new DelegationManager(
strategyManager,
eigenPodManager,
allocationManager,
pauserRegistry,
permissionController,
config.minWithdrawalDelayBlocks,
SEMVER
);
Logging.logContractDeployed(
"DelegationManager Implementation", address(delegationImplementation)
);
vm.broadcast(_deployerPrivateKey);
strategyManagerImplementation =
new StrategyManager(allocationManager, delegation, pauserRegistry, SEMVER);
Logging.logContractDeployed(
"StrategyManager Implementation", address(strategyManagerImplementation)
);
vm.broadcast(_deployerPrivateKey);
avsDirectoryImplementation = new AVSDirectory(delegation, pauserRegistry, SEMVER);
Logging.logContractDeployed(
"AVSDirectory Implementation", address(avsDirectoryImplementation)
);
vm.broadcast(_deployerPrivateKey);
eigenPodManagerImplementation =
new EigenPodManager(ethPOSDeposit, eigenPodBeacon, delegation, pauserRegistry, SEMVER);
Logging.logContractDeployed(
"EigenPodManager Implementation", address(eigenPodManagerImplementation)
);
vm.broadcast(_deployerPrivateKey);
rewardsCoordinatorImplementation = new RewardsCoordinator(
IRewardsCoordinatorTypes.RewardsCoordinatorConstructorParams(
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
delegation,
strategyManager,
allocationManager,
pauserRegistry,
permissionController,
config.calculationIntervalSeconds,
config.maxRewardsDuration,
config.maxRetroactiveLength,
config.maxFutureLength,
config.genesisRewardsTimestamp,
SEMVER
)
);
Logging.logContractDeployed(
"RewardsCoordinator Implementation", address(rewardsCoordinatorImplementation)
);
vm.broadcast(_deployerPrivateKey);
allocationManagerImplementation = new AllocationManager(
delegation,
eigenStrategy,
pauserRegistry,
permissionController,
config.deallocationDelay,
config.allocationConfigurationDelay,
SEMVER
);
Logging.logContractDeployed(
"AllocationManager Implementation", address(allocationManagerImplementation)
);
vm.broadcast(_deployerPrivateKey);
permissionControllerImplementation = new PermissionController(SEMVER);
Logging.logContractDeployed(
"PermissionController Implementation", address(permissionControllerImplementation)
);
}
function _upgradeAndInitializeProxies(
EigenLayerConfig memory config,
ProxyAdmin proxyAdmin
) internal {
// Initialize DelegationManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(delegation))),
address(delegationImplementation),
abi.encodeWithSelector(
DelegationManager.initialize.selector, config.delegationInitPausedStatus
)
);
Logging.logStep("DelegationManager initialized");
// Initialize StrategyManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(strategyManager))),
address(strategyManagerImplementation),
abi.encodeWithSelector(
StrategyManager.initialize.selector,
config.executorMultisig,
config.operationsMultisig,
config.strategyManagerInitPausedStatus
)
);
Logging.logStep("StrategyManager initialized");
// Initialize AVSDirectory
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(avsDirectory))),
address(avsDirectoryImplementation),
abi.encodeWithSelector(
AVSDirectory.initialize.selector,
config.executorMultisig,
0 // Initial paused status
)
);
Logging.logStep("AVSDirectory initialized");
// Initialize EigenPodManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(eigenPodManager))),
address(eigenPodManagerImplementation),
abi.encodeWithSelector(
EigenPodManager.initialize.selector,
config.executorMultisig,
config.eigenPodManagerInitPausedStatus
)
);
Logging.logStep("EigenPodManager initialized");
// Initialize RewardsCoordinator
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(rewardsCoordinator))),
address(rewardsCoordinatorImplementation),
abi.encodeWithSelector(
RewardsCoordinator.initialize.selector,
config.executorMultisig,
config.rewardsCoordinatorInitPausedStatus,
config.rewardsUpdater,
config.activationDelay,
config.globalCommissionBips
)
);
Logging.logStep("RewardsCoordinator initialized");
// Initialize AllocationManager
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgradeAndCall(
ITransparentUpgradeableProxy(payable(address(allocationManager))),
address(allocationManagerImplementation),
abi.encodeWithSelector(
AllocationManager.initialize.selector, config.allocationManagerInitPausedStatus
)
);
Logging.logStep("AllocationManager initialized");
// Initialize PermissionController (no initialization function)
vm.broadcast(_deployerPrivateKey);
proxyAdmin.upgrade(
ITransparentUpgradeableProxy(payable(address(permissionController))),
address(permissionControllerImplementation)
);
Logging.logStep("PermissionController upgraded");
}
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
function _deployStrategies(
PauserRegistry pauserRegistry,
ProxyAdmin proxyAdmin
) internal {
// Deploy base strategy implementation
vm.broadcast(_deployerPrivateKey);
baseStrategyImplementation =
new StrategyBaseTVLLimits(strategyManager, pauserRegistry, SEMVER);
Logging.logContractDeployed("Strategy Implementation", address(baseStrategyImplementation));
// Create default test token and strategy if needed
// In a production environment, this would be replaced with actual token addresses.
if (block.chainid != 1) {
// We mint tokens to the operator account so that it then has a balance to deposit as stake.
vm.broadcast(_deployerPrivateKey);
address testToken =
address(new ERC20PresetFixedSupply("TestToken", "TEST", 1000000 ether, _operator));
Logging.logContractDeployed("TestToken", testToken);
// Create strategy for test token
vm.broadcast(_deployerPrivateKey);
StrategyBaseTVLLimits strategy = StrategyBaseTVLLimits(
address(
new TransparentUpgradeableProxy(
address(baseStrategyImplementation),
address(proxyAdmin),
abi.encodeWithSelector(
StrategyBaseTVLLimits.initialize.selector,
1000000 ether, // maxPerDeposit
10000000 ether, // maxDeposits
IERC20(testToken)
)
)
)
);
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
// Store the strategy with its token information
deployedStrategies.push(
StrategyInfo({
fix: Resolve Foundry build errors and apply code formatting (#241) ## Summary Fixes the CI build failure in the `task-ts-build` workflow caused by Foundry v1.4.2's Solar linter not being able to resolve Snowbridge's context-specific import remappings. ## Problem The Snowbridge submodule uses context-specific remappings (prefixed with `:`) for its dependencies: - `lib/snowbridge/contracts/:openzeppelin/` → OpenZeppelin contracts - `lib/snowbridge/contracts/:prb/math/` → PRB Math library Foundry v1.4.2's Solar linter doesn't understand these context-specific remappings and fails with errors like: ``` error: file openzeppelin/utils/cryptography/MerkleProof.sol not found error: file prb/math/src/UD60x18.sol not found ``` ## Solution Added global remappings that the linter can understand: ```toml "openzeppelin/=lib/snowbridge/contracts/lib/openzeppelin-contracts/contracts/", "prb/math/=lib/snowbridge/contracts/lib/prb-math/", ``` ### Why This Works - The linter can now resolve `openzeppelin/` and `prb/math/` imports globally - These global remappings take **lower precedence** than context-specific ones during compilation - The compiler still uses the context-specific remappings (with `:`) when compiling Snowbridge contracts - The linter uses the global remappings when checking all files ## Changes ### Commit 1: Add global remappings - `contracts/foundry.toml`: Added 2 global remapping entries ### Commit 2: Apply forge fmt - Applied automatic formatting via `forge fmt` to ensure code style consistency - Multi-line formatting for long import statements and function signatures - No functional changes - purely formatting updates ## Testing ✅ Local build succeeds with `forge build` ✅ No Snowbridge import resolution errors ✅ `forge fmt --check` passes with no formatting issues ✅ Only linting notes/warnings remain (not errors) 🤖 Generated with [Claude Code](https://claude.com/claude-code) --------- Co-authored-by: Claude <noreply@anthropic.com>
2025-10-20 08:20:59 +00:00
address_: address(strategy), underlyingToken: testToken, tokenCreator: _operator
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
})
);
Logging.logContractDeployed("Test Strategy", address(strategy));
}
// Whitelist strategies in the strategy manager
IStrategy[] memory strategies = new IStrategy[](deployedStrategies.length);
for (uint256 i = 0; i < deployedStrategies.length; i++) {
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
strategies[i] = IStrategy(deployedStrategies[i].address_);
}
vm.broadcast(_operationsMultisigPrivateKey);
strategyManager.addStrategiesToDepositWhitelist(strategies);
}
function _deployPauserRegistry(
EigenLayerConfig memory config
) internal returns (PauserRegistry) {
// Use the array of pauser addresses directly from the config
vm.broadcast(_deployerPrivateKey);
return new PauserRegistry(config.pauserAddresses, config.unpauserAddress);
}
function _prepareStrategiesForServiceManager(
AVSConfig memory config,
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
StrategyInfo[] memory strategies
) internal pure {
if (config.validatorsStrategies.length == 0) {
config.validatorsStrategies = new address[](strategies.length);
for (uint256 i = 0; i < strategies.length; i++) {
feat(contracts): ✨ add set up validator script and execute it when starting integration tests (#47) This PR adds the `setup-validators` Typescript script that, given an already started up network, sets up a new validator set and sends it through Snowbridge's Gateway to the solochain. To accomplish that purpose, this PR: - Modifies the `DeployLocal` script to save in the `anvil.json` file not only the deployed strategies' addresses but also the owner of each strategy's underlying token. This owner is used as the source of funds to transfer tokens to other validators so they can register under that strategy. - Adds an `OPERATOR_SOLOCHAIN_ADDRESS` to the `Accounts` utility script contract. This address is the one used as the Solochain address when registering a new Operator. - Updates the `SignUpOperator` (which I believe is now deprecated since we have multiple Operator Sets) and `SignUpOperatorBase` scripts to adapt to both aforementioned changes. - Updates the `ELScriptStorage` script to save the new extra information of each deployed strategy (the creator of the underlying token) in storage. - Adds a `validator-set.json` file which contains the validators that should be registered in the AVS and sent to the Solochain network through the Snowbridge Gateway when starting any integration test. This is currently hardcoded but could be generated in any other way, giving us flexibility for testing. - Adds both a Markdown file and a Excalidraw diagram showcasing both how the setup of integration tests work and possible integration tests that will be added in a future PR. This list is not exahustive as there are many more scenarios we will want to test using integration tests. - Updates the `e2e-cli.ts` script to execute the validator setup when bootstrapping the network used for integration testing. --------- Co-authored-by: Facundo Farall <37149322+ffarall@users.noreply.github.com>
2025-04-22 19:49:51 +00:00
config.validatorsStrategies[i] = strategies[i].address_;
}
}
}
}