Add support for i18n attributes:
- Generate i18n contexts from i18n attributes, and extract the eventual messages into the constant pool.
- Emit I18nAttributes config instructions when needed.
- Use the generated i18n variable in the appropriate places, including extracted attribute instructions, as well as I18nAttributes config arrays.
PR Close#53341
Previously we recorded separate param values for a strucural directive
and the element tag it goes on. We then later attempted to combine those
into a single value. However in some cases this merging logic matched
the directive with the wrong tag.
This change implements an alternate approach where we match the
directive to its element tag from the start, while we're traversing the
ops. This should be a more robust solution.
PR Close#53327
We previously failed to populate the attributes property on projection
ops, this commit populates it and later strips out the "select"
attribute.
PR Close#53327
Previously we failed to reset the sub-template index counter when we
exited a root block. This caused following sibling blocks to start
counting at the wrong index.
PR Close#53327
It is possible for ICUs to be nested inside other ICUs. This change
adjusts our ingestion logic to create extra interpolation ops for the
nested ICUs during ingestion.
PR Close#53300
We previously had an assertion that every placeholder in the i18n AST
had a corresponding param in the output. However, there are some cases
such as interpolations nested inside ICUs where this assertion is not
true. This change simply removes the asserion.
PR Close#53300
ICUs may share a placeholder, and in that case they need special
post-processing. This change adds logic to cover this possibility. In
particular, we set the param to a special placeholder value and then
pass an array containing the sub-message variables as a post-processing
param.
PR Close#53300
When we re-assign the slot dependencies for the i18nExprs, we should
move them down below the other ops that target their same slot. This
keeps the behavior consistent with TDB
PR Close#53300
This commit fixes an issue where having an expression with nullish coalescing in styling host bindings leads to JS errors due to the fact that a declaration for a temporary variable was not included into the generated code.
Resolves#53295.
PR Close#53305
As part of this fix, I realized that child i18n blocks don't need their
own context. Instead, we can just add their params directly to the
context for their root block, and forgo the step of merging the contexts.
PR Close#53209
Fixes a bug in the sub-template index logic that caused it to reuse
indices that had already been assigned to more deeply nested templates
PR Close#53209
Structural directives inside an i18n block previously resulted in a
"list" param value (represented as "[...|...]"). This commit adds a
special case to the template pipeline to collapse the list into a single
compound value like TemplateDefinitionBuilder does.
PR Close#53209
ICU sub-messages should be recorded as belonging to the message for the
root i18n block they are part of. This ensures that they still get
emitted even if they are nested in a child template.
PR Close#53209
These changes expose the `ngContentSelectors` and `preserveWhitespaces` metadata to the TCB so they can be used in the next commit to implement a new diagnostic.
PR Close#53190
When doing directive matching in the compiler, we need to be able to create a selector from an AST node. We already have the utility, but these changes simplify the public API and expose it so it can be used in `compiler-cli`.
PR Close#53190
Adds support for inheriting host directives from the parent class. This is consistent with how we inherit other features like host bindings.
Fixes#51203.
PR Close#52992
When blocks were initially implemented, they were represented as containers in the i18n AST. This is problematic, because block affect the structure of the message.
These changes introduce a new `BlockPlaceholder` AST node and integrate it into the i18n pipeline. With the new node blocks are represented with the `START_BLOCK_<name>` and `CLOSE_BLOCK_<name>` placeholders.
PR Close#52958
These changes expose the `ngContentSelectors` and `preserveWhitespaces` metadata to the TCB so they can be used in the next commit to implement a new diagnostic.
PR Close#52726
When doing directive matching in the compiler, we need to be able to create a selector from an AST node. We already have the utility, but these changes simplify the public API and expose it so it can be used in `compiler-cli`.
PR Close#52726
The `$first`, `$last`, `$even` and `$odd` variables in `@for` loops aren't defined on the template context of the loop, but are computed based on `$index` and `$count` (e.g. `$first` is defined as `$index === 0`). We do this calculation by looking up `$index` and `$count` when one of the variables is used.
The problem is that all `@for` loop variables are available implicitly which means that when a nested loop tries to rewrite a reference to an outer loop computed variable, it finds its own `$index` and `$count` first and it doesn't look up the ones on the parent at all. This means that the calculated values will be incorrect at runtime.
These changes work around the issue by defining nested-level-specific variable names that can be used for lookups (e.g. `$index` at level `2` will also be available as `ɵ$index_2`). This isn't the most elegant solution, however the `TemplatDefitinionBuilder` wasn't set up to handle shadowed variables like this and it doesn't make sense to refactor it given the upcoming template pipeline.
Fixes#52917.
PR Close#52931
Reworks the `repeater` instruction to go through `advance`, instead of passing in the index directly. This ensures that lifecycle hooks run at the right time and that we don't throw "changed after checked" errors when we shouldn't be.
Fixes#52885.
PR Close#52935
In some cases ICU expression placeholders may have trailing spaces that
need to be trimmed when matching the placeholder to its corresponding
text binding.
PR Close#52698
We were previously counting the i18n expression index and deciding when
to apply i18n expressions based on the i18n context. These should be
done based on the i18n block instead.
PR Close#52698
The previous commit added support for interpolated text in ICUs, but it
made the assumption that the interpolation would be a single variable
read expression.
To properly support all kinds of interpolation expressions, this commit
refactors how ICUs are ingested to allow us to re-use the same logic we
use for bound text outside of ICUs.
To accomplish this, the `IcuOp` creation op has been removed in favor of
a pair of ops: `IcuStartOp` and `IcuEndOp`, that mark the beginning and
end of the ICU. Now, instead of inserting an `IcuUpdateOp` in the update
IR, we call `ingestBoundText` and use the presence of the surrounding
`IcuStartOp` and `IcuEndOp` to match the interpolation with the ICU.
PR Close#52698
Previously ICUs were assumed to only generate a single i18n expression
per ICU. However, it is possible for ICUs to contain text interpolations
which requires additional expressions. This commit adds support for
multiple expressions per ICU.
PR Close#52698
ICUs that contain element tags need extra parameters for the i18n
message. These are in addition to the element slot params that are
already added to the parent i18n block's params. In this commit we add a
new phase to fill in these placeholders.
PR Close#52698
Previously the template pipeline sorted i18n message params before
adding the sub-message placeholders. Now its sorts after all
placeholders are added.
Both the template pipeline and TemplateDefinitionBuilder previously
failed to sort the post-processing params. They both now sort these as
well. This is safe to change in TemplateDefinitionBuilder, as it does
not change anything about the functionality, it simply ensures that
params map in the output has the keys ordered in a way that can be
easily reproduced in the template pipeline.
PR Close#52698
Now that two-way bindings work correctly with implicit receivers, we can fix the corresponing source map tests. The main issue was that we were not properly mapping `elementEnd` for elements with no closing tag (self-closing elements).
PR Close#52479
Some two-way bindings tests were not working properly, because we could not ingest the implicit receiver required to write to the `ngModelChanges` property. Now, we properly resolve that implicit receiver to the root component context.
Also, add some tests, both for the simple case, and the case where the listener is inside a nested view.
PR Close#52479
Some `defer` blocks have external dependencies on other components or directives. These dependencies need to be extracted into deps functions, which either return local deps, or use a dynamic import for non-local deps. Template Pipeline can now generate these functions.
PR Close#52479
When an `ng-template` has local refs, such as `<ng-template #foo>`, we must emit a `ɵɵtemplateRefExtractor` argument to the template creation functino. The template pipeline now supports this.
PR Close#52479
Some defer triggers, such as `hover`, expect a local reference as an argument. For example, `@defer (on hover(target))` waits until the user hovers over the target.
However, these defer conditions also have a nullary form, in which the trigger is implicitly the first element in the placeholder block. We now support that case in template pipeline.
PR Close#52479
We already supported `defer on` conditions, which become instructions in the create mode block.
Now, we also support `defer when` conditions, where are very similar, with the notable difference that they go in the update block (because a user-supplied condition must be re-evaluated on each update.)
PR Close#52479
Previously we supported ICUs where the ICU itself represetned the entire
translated message. This change allows ICUs to act as a sub-message
inside other translated messages.
PR Close#52503
Previously we assumed that all i18n messages that are eventually
extracted into the consts array would be generated based on an i18n
block. However, it is also possible to have messages generated directly
from ICUs. This change introduces an i18n context op, so that we can
consistently extract i18n messages from the context op in all cases.
PR Close#52503
Discovered this while validating #52414 against Angular Material. We were projecting `<ng-template>` nodes at the root of `@if` and `@for` with the `ng-template` tag name which enables directive matching and applies the directive to the control flow node.
These changes fix the issue by never passing along the `ng-template` tag name.
PR Close#52515
