The tracker is responsible for registering the extra imports during the analysis and resolve compiler phases, and later to be used by the transformer to get a list of extra imports to be generated for each source file.
This commit only contains the API, and the actual implementation for each method will be done in subsequent commits where an application of that method is available and so tests can be written for the implementation.
PR Close#53543
At the moment local compilation mode does not support custom decorators, and it leads to unhandled errors. In this change a compile time diagnostic is produced in local mode for custom decorators. This is a temporary solution since there are few custom decorators are in use in g3. Custom decorators will be eventually supported in local mode.
PR Close#53983
This adds initial support for extracting and rendering call and construct
signatures of classes, like within the new `InputFunction` for signal
inputs.
For now, signatures are a rare occasion and represented as class member
entries. In the future we might consider exposing this via its own entry
type, and field on the class/interface entry.
PR Close#54053
This fixes the definitions for signal-based inputs in the language
service and type checking symbol builder.
Signal inputs emit a slightly different output. The output works well
for comppletion and was designed to affect language service minimally.
Turns out there is a small adjustment needed for the definition symbols.
PR Close#54053
This commit separates `InputSignal` for input signals with transforms.
The reason being that most of the time, signal inputs are not using
transforms and the generics are rather confusing.
Especially for users with inferred types displayed in their IDEs, the
input signal types are seemingly complex, even if no transform is used.
For this reason, we are introducing a new type called
`InputSignalWithTransform`. This type will be used for inputs with
transforms, while non-transform inputs just use `InputSignal`.
A notable fact is that `InputSignal` extends `InputSignalWithTransform`,
with the "identity transform". i.e. there is no transform. This allows
us to share the code for input signals. In practice, we don't expect
users to pass around `InputSignal`'s anyway.
PR Close#54053
During the template parsing stage two-way bindings are split up into a property and event binding. All the downstream code treats these binding the same as their one-way equivalents. For some future work we'll have to distinguish between the two so these changes update the `BoundElementProperty.type` and `ParsedEvent.type` to include a `TwoWay` type. All existing call-sites have been updated to treat `TwoWay` the same as `Property`/`Regular`, but more specialized logic will be added in the future.
PR Close#54065
Previously, defer deps fns names were only prefixed with the component name, meaning that distinct deps fns in the same component would produce a name collision. Now, we take into account the entire template function name when naming inner deps fns.
PR Close#54060
The Template Pipeline is a brand new backend for the Angular compiler, replacing `TemplateDefinitionBuilder`. It generates the Ivy instructions corresponding to an input template (or host binding). The Template Pipeline has an all-new design based on an intermediate representation compiled over many phases, which will allow us to experiment with compiler changes more easily in the future.
With this commit, the template pipeline can now be enabled in any project via the `useTemplatePipeline` TSConfig option. However, it is still disabled by default.
PR Close#54057
This commit introduces three additional diagnostics for queries:
- If a query (either using decorator or signal-based) is declared on a
static class member, a diagnostic is raised.
- If a signal-based query is mixed with a query decorator, a diagnostic
is raised. Similar to signal inputs.
- If a singal-based query is also declared in the directive/component
class decorator metadata, a diagnostic is raised.
PR Close#54019
Due to some refactorings, we were only checking the function name
and whether it originates from an import. We should also verify the
module. This seems like logic we lost in the refactorings.
PR Close#54019
Collapses multiple sibling query advance statements into single
query advance invocations. This will help reducing generated code
for directives/components with many queries.
PR Close#54019
Previously, if an ICU was inside a nested i18n root, it would use the nested root to calculate whether it should be applied. Now, we use the root i18n block.
PR Close#54026
This commit adds compliance tests to ensure that the generated output of
signal-based queries matches our expectation.
Note: collapsing query advance instructions is not implemented yet.
PR Close#53978
This commit ensures that libraries can use signal-based queries, and the
partial compilation output will capture their metadata.
The linker is updated to support parsing this.
Two notes:
1. Older linker versions are not capable of parsing this, so the minimum
version for signal-based queries is adjusted when such are used.
2. We only emit `isSignal` metadata for queries when signal queries are
used. This enables libraries to continue supporting older linker
versions, if signal-based queries are not used.
PR Close#53978
Adds a compiler integration test for recognizing signal-based queries,
and emitting the expected output. Concrete output will be verified via
the compliance tests.
PR Close#53978
This commit uses the initializer API recognition that we built for
signal-based inputs, and teaches the compiler to recognize class members
that refer to `viewChild`, `viewChildren`, `contentChild` or
`contentChildren`. Those will declare signal-based view or content queries.
PR Close#53978
This commit introduces the compiler output generation for signal-based
queries. Signal-based queries will have new creation-mode instructions
and update instructions to advance the current query indices in the
global shared context.
An output like the following is the expected output for signal-based
queries:
```
i0.ɵɵdefineComponent({
viewQuery: function App_Query(rf, ctx) {
if (rf & 1) {
i0.ɵɵviewQuery(ctx.d, _c0, 5);
i0.ɵɵviewQuerySignal(ctx.ds1, _c0, 5);
i0.ɵɵviewQuerySignal(ctx.ds2, _c0, 5);
}
if (rf & 2) {
let _t;
// only change-detected queries need explicit refresh
i0.ɵɵqueryRefresh(_t = i0.ɵɵloadQuery()) && (ctx.d = _t.first);
// we bump up current query index by 2 positions since there are 2 signal-based queries
i0.ɵɵqueryAdvance(2);
}
…
},
…
});
```
Note: For now, the collapsing of multiple advance instructions is not
implemented. This will be a follow-up.
Note 2: A couple of query helpers are now in their own file. This makes
it easier to focus on query-specific compiler code. The new function is
called `createQueryCreateCall`, which is a modified variant of the
existing function that previously only generated query parameters.
PR Close#53978
The new `input` API is recognized using class member initializers.
We want to support similar APIs for queries, using e.g. `viewChild`
or `viewChild.required`.
This commit extracts the input recognition API and makes it reusable,
so that the same logic can be used to detect queries on a class member.
Additional changes:
- replacing `coreModule` with the simpler `isCore` parameter. This is
more readable.
- support for detecting a list of API names on a single class member.
This allows us to detect possible query functions on the same class
member without having to check X times. We simply check for the
initializer API pattern and check if one API function name matches.
PR Close#53978
At the moment local compilation breaks for host directives because the current logic relies on global static analysis. This change creates a local version by cutting the diagnostics and copying the directive identifier as it is to the generated code without attempting to statically resolve it.
PR Close#53877
At the moment when unified host is selected (through option `_useHostForImportGeneration`) the compiler always generates alias reexports. Such reexports are mainly generated to satisfy strict dependency condition for generated files. Such condition is no longer the case for G3. At the same time, these alias reexports make it impossible to mix locally compiled targets with globally compiled targets. More precisely, a globally compiled target may not be able to consume a locally compiled target as its dependency since the former may import from the alias reexports which do not exist in the latter due to local compilation mode. So, to make global-local compilation interop possible, it is required to be able to turn off alias reexport generation.
PR Close#53937
This commit adds extra logic to produce a diagnostic in case `@Component.deferredImports` contain types from imports that also bring eager symbols. This would result in retaining a regular import and generating a dynamic import, which would not allow to defer-load dependencies.
PR Close#53899
This commit update the logic to enable `register` and `resolve` phases for local compilation. Those phases will be useful for local compilation in certain cases (will be used in followup PRs).
PR Close#53901
Currently when the extended type check fails due to an import reference
that cannot be generated, the fatal diagnostic is not caught and
not properly exposed as a `ts.Diagnostic` that can be gracefully
handled. This is inconsistent to non-extended type checking diagnostics.
This is problematic because Angular CLI applications currently fail in
obscure ways because:
- the CLI does not expect `getDiagnosticsForFile` to actually throw
runtime errors.
- the CLI does not seem to properly print these errors given the
parallel workers and build excection, and those errors are
especially hard to debug because there is no `stack` for
`FatalDiagnosticError`'s.
Example: `MyDir` is not exported and the type check block cannot reference it.
PR Close#53896
This commit updates the `DeferredSymbolTracker` class to take info account the `onlyExplicitDeferDependencyImports` flag. The `DeferredSymbolTracker` class also exposes a new API to register import declarations as explicitly deferred, which will be used in followup commits.
PR Close#53591
This commit updates typechecker to store full Pipe metadata in internal data strctures, so that this information is available to more places in the code, which will be updated in a followup commit.
PR Close#53591
This commit updates a few places to extract the logic into a separate functions which will be reused in a few places in followup commits.
PR Close#53591
This allows us to ensure signal inputs and a potential JIT transform
remain single file compilation compatible. The consequences are that
options need to be statically analyzable more strictly, compared to
loosened restrictions with static interpretation where e.g. `alias`
can be defined through a shared variable.
PR Close#53872
Adds infrastructure to run signal input tests with JIT (using the
transform) and AOT. Acceptance tests for signal inputs will run with
both variants. In the future we can consider expanding this
infrastructure for all of our acceptance tests, but that's a different
story.
PR Close#53808
Improves the recognition of the `input`/`input.required` functions to
not depend on external module resolution. This is useful for local
compilation and for transforms operating on a single file/ isolated
module.
PR Close#53808
Currently when someone declares a signal or non-signal input on a static
class member, the compiler will not yield any diagnostic. We can detect
these mistakes and report a diagnostic to help our users.
PR Close#53808
This commit addds two diagnostics for two scenarios where signal inputs
are declared incorrectly:
- a signal input is also annotated with `@Input` in the TypeScript
sources.
- a signal input is also declared in the `inputs` option of
`@Directive/`@Component`.
PR Close#53808
This commit adds a transform for supporting input signals in JIT
environments. The transform will be wired up for Angular CLI
applications automatically. An integration test verifies that this fixes
unit testing with signal inputs.
The transform basically will take the signal input metadata and
transform it into `@Input` decorators that can provide static
information to the Angular JIT runtime when the directive/component
definition is compiled.
PR Close#53808
This commit does two things:
- exposes `addImports` so that it can be used by transforms that we are
adding to the compiler. e.g. the signal input to `@Input` transform.
- `updates `addImports` to support/use the transform context factory.
This will allow us to write proper transforms using `addImports`. Also
leverages this in the Ivy JS/DTS transforms.
PR Close#53808
Moves the signal input class member extraction logic into the dedicated
input function file. This makes the code for signal inputs more
self-contained.
This commit then re-exposes the function as part of `ngtsc/annotations`
so that it can be used later for a transform that will take the signal
input metadata and translate it into a `@Input` decorator. This allows
us to remove code duplication and guarantees consistency/correctness
PR Close#53808
We recently landed a commit to introduce support for generic type
checking of signal inputs. For that we had to implement logic that
will generate imports for inline type constructors. This required
changes to the context logic and `TypeCtorOp` file-level op.
This commit ensures that everything is working as expected, specifically
in cases where an inline type ctor is generated and imports would be
needed to unwrap the class members for `InputSignal`.
PR Close#53808
Adds signal input compliance tests, ensuring linking works as expected,
partial output is generated properly, types are inferred properly, and
that the full, or linked output matches our expected runtime structure.
PR Close#53808
As we introduced the new partial output for signal inputs, we also need
to update the linker code to be able to parse this. This commit adds
this functionality.
In the follow-up commit, compliance tests for linking, partial output,
and full compilations are added.
PR Close#53808
As part of testing we did accidentally use `bitwiseAnd` for the input
flags, given we started without an extra flag for `HasTransform`.
This commit teaches the compiler to support emitting bitwise OR
and uses it when combining input flags, fully re-enabling transforms
for signal components after the new flag mechanism was introduced in
previous commits.
PR Close#53808
This commit changes the `HasTransform` flag to be only concerned with
decorator inputs. This allows us to automatically detect signal input
transforms without reliance on the flag, resulting in less complexity in
the compiler (as outlined in the design doc) and various other places,
while it also allows us to simplify JIT support for signal inputs
because there would be no need to capture the "hasTransform" state in
the decorator so that JIT can generate the according input flags.
`isSignal` will still persist as an input flag to allow for monomorphic
and highly efficient distinguishing at runtime, whether an input is
signal based or not. JIT transform will also need to propagate this
information to the runtime somehow.
PR Close#53808
In some cases, the input files for a partial output generation
compliance tests may be invalid and lead to compilation errors.
The golden partial would be silently generated with the remaining
test cases. Instead of hiding errors, we will now print these and
cause the script to fail properly.
Note that the error logging is pretty minimalistic, but it's sufficient.
PR Close#53808
