This saves us an executor on Travis.
Note that we still do a bazel build on travis when we run the integration tests under e2e_2.
We expect that CircleCI is the only place we'll ever consume bazel-built artifacts.
PR Close#22170
Use `-f` when doing `git fetch` for the PR. Without
it the `git fetch` will not overwrite what is currently
fetched locally, in essence doing fast-forward only.
PR Close#21295
There seems to be some issue that causes Chrome/ChromeDriver to
unexpectedly reload during the aio e2e tests, causing flakes. It is not
clear what exactly is causing the reloading, but to the best of my
knowledge it is something inside Chrome or ChromeDriver.
Pinning Chrome to r494239 (between 62.0.3185.0 and 62.0.3186.0) fixes
the flakes.
Fixes#20159
Since our version of Chromium is also pinned, a new ChromeDriver (that
drops support for our Chromium version) can cause random (and unrelated
to the corresponding changes) errors on CI.
This commit pins the version of ChromeDriver and it should now be
manually upgraded to a vrsion that is compatible with th currently used
Chromium version.
PR Close#20940
Add enough BUILD files to make it possible to
`bazel build packages/core/test`
Also re-format BUILD.bazel files with Buildifier.
Add a CI lint check that they stay formatted.
PR Close#20768
The scripts were accidentally broken in #20524. More specifically, when a limit
was exceeded the script would break while trying to log an error message due to
a missing `commit` variable.
This commit fixes it and also does some minor clean-up (improve docs, use more
descriptive variable names, remove dead code, etc).
PR Close#20683
When this command is run on CI, `yarn build` has already been run, so
this was unnecessarily building angular.io again (adding ~4mins to the
`aio` job).
When this command is run locally, it is most often about testing a new
`lighthouse` version/config, so you don't need to build angular.io over
and over (and if necessary, one can always run `yarn build` manually).
Closes#19633
Usages of `NgTools_InternalApi_NG_2` from `@angular/compiler-cli` will now
throw an error.
Adds `listLazyRoutes` to `@angular/compiler-cli/ngtools2.ts` for getting
the lazy routes of a `ng.Program`.
PR Close#19836
Also adds auto upgrade from lower version based
on the .d.ts file (e.g. from version 3 to 4).
This is needed as we are now also capturing type aliases
in metadata files (and we rely on this),
see 6e3498ca8e.
This commit allows building angular.io against the locally built Angular
packages. It adds two new npm scripts:
- `setup-local`: Same as `setup`, but overwrites the Angular packages for both
angular.io and the examples boilerplate with the locally built ones.
- `build-local`: Same as `build`, but uses `setup-local` instead of `setup`
under the hood, thus overwriting installed Angular packages with locally built
ones.
Fixes#18611
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
* Remove now unnecessary portions of build.
* Add a compilePackageES5 method to build ES5 from sources
* Rework all package.json and rollup config files to new format
* Remove "extends" from tsconfig-build.json files and fixup compilation roots
PR Close#18541
The source map does not currently work with the transformer pipeline.
It will be re-enabled after TypeScript 2.4 is made the min version.
To revert to the former compiler, use the `disableTransformerPipeline` in
tsconfig.json:
```
{
"angularCompilerOptions": {
"disableTransformerPipeline": true
}
}
```
This commit also updates the version of `@angular/cli` used for docs examples.
The previous (transient) dependency `@ngtools/webpack` was not compatible with
`@angular/compiler-cli@>=5` and was breaking when running against the local
builds (currently at 5.0.0-beta.2). The version of `@ngtools/webpack` used by
the latest `@angular/cli` version is compatible with `@angular/compiler-cli@5`.
There are now 3 modes for deployment: next, stable, archive.
We compute which mode (and other deployment properties)
from the `TRAVIS_BRANCH` and the `STABLE_BRANCH`.
If the TRAVIS_BRANCH is master we deploy as "next".
If the `TRAVIS_BRANCH` matches the `STABLE_BRANCH` we deploy as "stable".
Otherwise if the branch has a major version lower than the stable version
and its minor version is highest of similar branches we deploy as "archive".
For "archive" deployments we compute the firebase project and deployment
url based on the major version of the `TRAVIS_BRANCH`.
As well as choosing where to deploy the build, we also use this
to select the environment file for the AIO Angular app.
This will enable the app to change its rendering and behaviour
based on its mode.
See #18287Closes#18297
There are now 3 modes for deployment: next, stable, archive.
We compute which mode (and other deployment properties)
from the `TRAVIS_BRANCH` and the `STABLE_BRANCH`.
If the TRAVIS_BRANCH is master we deploy as "next".
Otherwise if the branch is the highest of its minor versions
we deploy as "stable" if the `TRAVIS_BRANCH` matches the `STABLE_BRANCH` or
else "archive".
For "archive" deployments we compute the firebase project and deployment
url based on the major version of the `TRAVIS_BRANCH`.
As well as choosing where to deploy the build, we also use this
to select the environment file for the AIO Angular app.
This will enable the app to change its rendering and behaviour
based on its mode.
See #18287
In previous version of tsickle abstract class methods were materialized.
The change resulted in 6Kb savings in angular.io bundle.
This change also required the removal of `@private` and `@return` type
annotation as it is explicitly dissalowed by tsickle.
NOTE: removed casts in front of `makeDecorator` due to:
https://github.com/angular/devkit/issues/45
```
14938 Jul 19 13:16 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 19 13:16 inline.d8e019ea3cfdd86c2bd0.bundle.js
589178 Jul 19 13:16 main.54c97bcb6f254776b678.bundle.js
34333 Jul 19 13:16 polyfills.4a3c9ca9481d53803157.bundle.js
14938 Jul 18 16:55 0.b19e913fbdd6507d346b.chunk.js
1535 Jul 18 16:55 inline.0c83abb44fad9a2768a7.bundle.js
582786 Jul 18 16:55 main.ea290db71b051813e156.bundle.js
34333 Jul 18 16:55 polyfills.4a3c9ca9481d53803157.bundle.js
main savings: 589178 - 582786 = 6,392
```
PR Close#18236
Since 808bd4af4, we are no longer pre-verifying PRs before uploading the build
artifacts to the preview server, thus we no longer need the
`travis-preverify-pr.sh` script or the `GITHUB_TEAM_MEMBERSHIP_CHECK_KEY`
variable.
There have been some issues lately with Travis jobs failing due to
`print-log.sh`. This is likely due to trying to print the Lighthouse PWA report,
which is too large.
This commit stops printing that report (since it was rarely used and is pretty
easy to acquire when needed) and restores the `print-logs.sh` script (that was
temporarily removed with dfcca66fd).
The current stable branch is determined based on the current version mapped to
the npm `latest` tag (by replacing the patch version number with 'x' - e.g.
`1.2.3` --> `1.2.x`).
PRs against the stable branch will be deployed to the preview server (as long as
the rest of the requirements are met). Commits on the stable branch itself will
be deployed to production.
Fixes#16908
(Coincidentally), this wasn't an issue before fdfeaaf1f, because
pre-verification was run after `test.sh`, during which `aio-builds-setup` was
built.
Now that `deploy-staging.sh` is being run before `test.sh`, we need to build
the `aio-builds-setup` scripts first.
Previously, PR previews were deployed after successfully running all tests.
While this makes sense for staging/production deployments, previews should be
available as soon as possible (and regardless of the outcome of tests).
Fixes#16705
Previously, no previews would be deployed for PRs that didn't touch files inside
`aio/`. Now, previews will be deployed for PRs that touch non-spec files inside
either `aio/` or `packages/` (as long as other preconditions are met).
Partially addresses #16526.
The latest rxjs release works with closure compiler out of the box.
We no longer need to compile our own.
Also put closure options into a file rather than using a shell script.
- Ensure that the result passes OASIS XLIFF 2.0 schema validation
- Use <ph/> for self-closing placeholder tags
- Use <pc></pc> for other placeholder tags
- Check for the correct XLIFF file version
- Add ICU support
fixes#11735
`ngc` would look for flat module resources relative to the flat module index.
`ngc` now looks for flat module resources relative to the `.d.ts` file that declarates
the component.
Fixes#15221
PR Close#15367
