As we roll out more PRs that migrate to `ts_project`, we need to make
sure that we don't break existing `tsec` targets. This PR copies the
original `tsec` Starlark code and adjusts it to work with the interop.
Note that we don't patch as this would unnecessarily complicate this
file that only exists during migration. Long-term, after migration, we
either need to consider switching to the new ESLint plugin that is being
worked on (I'm in contact with the team), or we send a CL to update the
Tsec Starlark code to keep our changes minimal and avoid scope increase.
PR Close#61336
The `ts_project` interop rule that we've built was also used in the
Angular CLI migration, and it allows us to mix `ts_project` and
`ts_library` targets; enabling an incremental migration. Additionally
set up the `ng_project` to replace `ng_module`.
PR Close#61088
Previously we never could use relative imports to import e.g. `Component`
in e.g. the `core/tests/bundling` folder. This was necessary because otherwise the
Angular compiler wouldn't process those files as it wouldn't recognize
the Angular decorator as the one from `@angular/core`.
Notably this still isn't a large issue because relative imports still
work for most core tests, that are JIT compiled!
For bundling tests though, or some smaller targets, our new upcoming
guidelines for using relative imports inside the full package; fall
apart. This commit unblocks this effort and allows us to use relative
imports in all tests of `packages/core`. This is achieved by leveraging
the existing `isCore` functionality of the compiler, and fixing a few
instances that were missing before.
PR Close#60268
Replaces esbuild with Rollup for bundling schematics to support code splitting, as esbuild does not handle code splitting when targeting CommonJS modules.
**Before:**
```
du -sh dist/bin/packages/core/npm_package/schematics
7.7M dist/bin/packages/core/npm_package/schematics
```
**After:**
```
du -sh dist/bin/packages/core/npm_package/schematics
3.1M dist/bin/packages/core/npm_package/schematics
```
PR Close#57602
This commit reduces the bundle size of `@angular/core` by 19.5 MB by excluding sourcemaps from the schematics.
Since the `esbuild` rule doesn't allow disabling sourcemaps directly, we work around this by setting the sourcemaps to `external`. Afterward, we filter the output to include only the `.js` files.
PR Close#57545
To increase the ease of development we are moving @angular/docs into the adev directory within this repo. While
we are doing this to improve our development experience in the short term, efforts are also in place
to maintain a division between this @angular/docs (shared) code and adev itself, so that it can be extracted
back out in the future when components is ready to leverage it as well.
PR Close#57132
This commit patches `ts_library` to be able to produce `ES2022`. Also, updates the build tsconfig and sets `useDefineForClassFields` to `false` to keep the same behaviour of `ng_module`.
PR Close#49559
This commit patches `ts_library` to be able to produce `ES2022`. Also, updates the build tsconfig and sets `useDefineForClassFields` to `false` to keep the same behaviour of `ng_module`.
PR Close#49332
This commit does three things that all related and required to get
rid of `webdriver-manager`:
* Our puppeteer protractor setup in AIO relies on webdriver-manager
because we install a corresponding chromedriver based on the puppeteer
chromium version. We would like to get rid of this brittle setup.
* We don't use `puppeteer` in many places because we manage chromium and
the driver through Bazel. This commit removes the remaining puppeteer
usage and replaces it with the Bazel-managed canonical browser
* We need to migrate the AIO production URL tests to Bazel. These
weren't part of Aspect's migration. This is needed so that we can drop
puppeteer and use the Bazel browser setup.
* Migrates some at-runtime TS `ts-node` test setup to proper idiomatic
Bazel code. Needed because it depends on code that also had to be
migrated to Bazel given the production e2e test Bazel migration (above
points).
Note: The xregexp dependency had to be added to the root project because
`ts_library` does not support compilation deps from `@aio_npm`. This is
something we will fix anyway when we have a more modern toolchain!
PR Close#49025
* updates ng-dev and build-tooling since the previous SHAs are
no longer existent after the CircleCI incident snapshot build removal.
* accounts for the new stamping variables.
PR Close#48731
With the recent ESM changes we also started generating Saucelabs
targets for `//devtools` (as part of an effort to avoid code
duplication). We should skip Saucelabs targets for this package
because we don't intend to run them on Saucelabs and this whole
setup needs some more work (and we shouldn't change unexpectedly).
PR Close#48554
Fixes that we temporarily broke the Bazel npm package artifact as
part of the ESM work. This commit adjusts it and also makes the
artifact subsitutions more maintainable.
PR Close#48521
This is basically a pre-step for combining devmode and prodmode into a
single compilation. We are already achieving this now, and can claim
with confidence that we reduced possible actions by half. This is
especially important now that prodmode is used more often, but rules
potentially still using the devmode ESM sources. We can avoid double
compilations (which existed before the whole ESM migration too!).
We will measure this more when we have more concrete documentation
of the changes & a better planning document.
Changes:
* ts_library will no longer generate devmode `d.ts`. Definitions are
generated as part of prodmode. That way only prodmode can be exposed
via providers.
* applied the same to `ng_module`.
* updates migrations to bundle because *everything* using `ts_library`
is now ESM. This is actually also useful in the future if
schematics rely on e.g. the compiler.
* updates schematics for localize to also bundle. similar reason as
above.
PR Close#48521
* Switches all remaining targets (even if not tested and failing as per
build) away from `ts_devserver` to the canonical `http_server` from
dev-infra.
PR Close#48521
* The benchmark macro should also use devmode ESM 2020. No CommonJS
* The benchmark macro should always add `benchpress` as runtime
dependency because it is loaded asynchronously.
* The protractor `nodejs_binary` should use our ESM-interop binary
so that ESM resolution works (e.g. when `await import(benchpress)` from
the driver utilities is invoked).
PR Close#48521
Since the `defaults.bzl` repo-wide macros are now supporting ESM,
the special spec-bundle logic from `devtools` can be removed.
Also the esbuild configurations need to be updated to account
for the recent dev-infra build-tooling changes. Also properly
now ensures that `aysnc/await` is downleveled for ZoneJS compatibility.
PR Close#48521
* Adjusts tests to no longer rely on CommonJS features. Switches them to
ESM
* Updates test initialization files to not double-initialize Jasmine now
that bootstrap files are loaded after Jasmine. The `jasmine.boot`
setup was hacky from `rules_nodejs` and will break in the future
regardless if we e.g. use `rules_js` with actual unmodified `jasmine`.
PR Close#48521
Protractor does not support ESM, so we need to take all the ESM
output and bundle it into a CommonJS file. This comes at the cost
of not using actual ESM for execution, but the ESBuild bundle follows
strict ESM semantics so we can be sure it's compatible when we have
an ESM-compatible e2e test runner in the future.
PR Close#48521
Introduces a variant of `jasmine_node_test` that works with async/await
in combination with ZoneJS. This is needed for tests relying on
async/await in combinatin with change detection.
Browser tests are already benefting from ESbuild async-await
downleveling. Node tests would ideally not need this, but until
ZoneJS supports native async/await we need to also process
source files to avoid native async/await syntax.
PR Close#48521
The Angular CLI does not yet support schematics running as ESM. For
this reason we switch the schematics BUILD targets to explicitly
use ESM (as an exception in the repo).
PR Close#48521
Since Karma with Bazel does not support ESM natively, we bundle the
tests using ESBuild into a single AMD file. This not only solves the
ESM issue until we can run browser ESM tests natively (also pending
in the components repo - the esbuild generation follows ESM semantics
but since collapsed we don't rely on the real module system).
A benefit of bundling is also faster and more reliable Karma browser
tests since only a single file needs to be loaded- compared to hundreds
of individual files.
PR Close#48521
We use `bazel/esbuild` in various places (e.g. for app bundling tests).
These tests rely on the Angular Compiler-CLI itself for e.g. linking
or the Terser configuration. Since everything in this repo is now
strict ESM, the ESBuild configs (which are already ESM-supported)
need to import from `//packages/compiler-cli`. We also need to be
able to leverage our existing ESM Bazel loader for this though as
otherwise resolution would fail.
Long-term we can remove this if everything in the compiler-cli
would use `.mjs` extensions and the import paths would also specify
an explicit extension. See: https://nodejs.org/api/esm.html#mandatory-file-extensions
PR Close#48521
Since we generate a `.mjs` file as entry-point for jasmine tests,
a couple of issues prevented the transitive dependencies from
bootstrap targets to be brought in (causing resolution errors):
1. The `_files` (previously `_esm2015`) targets are no longer needed,
and they also miss all the information on runfiles.
2. The aspect for computing linker mappings does not respect the
`bootstrap` attribute from the `spec_entrypoint` so we manually
add the extract ESM output targets (this rule works with the aspect
and forwards linker mappings).
PR Close#48521
Note: `--require` does not work for ESM. `--import` does not exist
in the current Node versions. Started being available in NodeJS v19.
A custom entry-point script, already supported by dev-infra, simplifies
the whole logic and solves the ESM case.
PR Close#48521
For every `ts_library` target we expose a shorthand that grants
access to the JS files because `DefaultInfo` of a ts library
only exposes the `.d.ts` files.
We rename this away from `es2015` since in practice it's a much
higher target these days. Additionally we no longer use the devmode
output but rather use the prodmode output which has the explicit
`.mjs` output- compatible with ESM.
PR Close#48521
We introduced a loader that supports ESM with Bazel. This loader can
only be enabled as part of our `nodejs_binary` defaults.bzl test. This
works fine, but there might be other binaries/tests e.g. from
`@angular/build-tooling` that should be able to use ESM & might need to
for importing the `compiler-cli`.
We move the logic for installing the patch into a `rules_nodejs` patch.
There is an existing one that is just updated to "enable ESM support".
PR Close#48521
We modified the macros of `nodejs_binary/test` to have a rule
in between that requests the `.mjs` output. This works fine but
breaks make variable substitution for `templated_args` because
Bazel requires referenced labels to be part of the explicit `data`.
The rule in between breaks this, so we add a new argument that
can be used for such "template"/"args" data dependencies.
This can be removed when everything is ESM and we don't need
the rule in between.
PR Close#48521
The `nodejs_binary` rule already prioritizes the `.mjs` output as
of the recent commits. The `nodejs_test` rule should do the same,
and also set `use_esm = True`
PR Close#48521
Replaces the existing ESM loader for dealing with external module
imports. This loader was introduced by Aspect for AIO `.mjs` scripts.
The loader will be used as foundation for a more extensive loader
that also properly handles first-party packages.
Additionally another loader is added, all packed as a single
loader because our current NodeJS version only supports a single
loader per node invocation. So we implement chaining ourselves.
The new loader will attempt rewriting `.js` extensions to `.mjs`,
also it will add `.mjs` if not already done. This is necessary
in the transition phase because we don't/cannot use explicit `.mts`
extensions and also we don't specify extensions in imports yet.
Long-term we would likely use `.mts` and explicit import extensions,
but it's not yet clear how we would sync this into g3 too.
PR Close#48521
Currently the devmode output for `ng_module` and `ts_library` is
using ES5 CommonJS UMD. To bring it in sync with prodmode and
to start with our long-term migration to full ESM- the devmode
is updated to to ES2020 ES modules too.
This will require more tricks to make devmod work with the bazel
setup and also tests may need to be refactored given them relying
on ES5 CJS features, like for `spyOn` jasmine patching etc.
PR Close#48521
Similar to the Rules NodeJS require patch, we have an ESM import patch
as of the AIO Bazel migration (to support ESM scripts better).
This script uses `--loader`, an experimental NodeJS flag. This is
similar to how `ts-node` uses it. We should disable the warnings
as it results in a lot of unreadable Bazel output and the warnings
are okay to be ignored. Note that we cannot fine-grain disable
the specific warning so all others would be disabled too.
Realistically we haven't seen any in the past and long-term we will
be not relying on patched resolution anyway (looking at `rules_js`).
PR Close#48282
The dev-infra build tooling is now decoupled from `ng-dev`. This will
make it easier to update `ng-dev` without necessarily needing to upgrade
the whole build system, Bazel etc. This is useful when e.g. new release
tool features have been added and should also be ported to active LTS
branches.
PR Close#46976
The jasmine seed generator is only used in a single karma configuration
file. Used by the legacy build and the Saucelabs/ZoneJS Karma jobs.
We should move the separate script code directly into the config to make
it clear that the seed generation is not used elsewhere, and to simplify
the Starlark code.
PR Close#46798
The `app_bundle` rule from the shared dev-infra package is no longer in
the benchmarking folder, but instead is part of the general Bazel rules
exposed by `dev-infra`. This commit accounts for this location change.
PR Close#46642
