The `getBaseHref` method is called several times per request and currently queries through the entire document. We can speed it up by taking advantage of the fact that the `<base>` can only be a direct child of the `<head>` and is usually defined towards the beginning. Below are some benchmarks for a "Hello world" app before and after this change.
### Before:
```
Running 60s test @ http://localhost:4202
100 connections with 10 pipelining factor
┌─────────┬────────┬────────┬────────┬────────┬───────────┬──────────┬─────────┐
│ Stat │ 2.5% │ 50% │ 97.5% │ 99% │ Avg │ Stdev │ Max │
├─────────┼────────┼────────┼────────┼────────┼───────────┼──────────┼─────────┤
│ Latency │ 568 ms │ 853 ms │ 901 ms │ 904 ms │ 866.58 ms │ 437.6 ms │ 9915 ms │
└─────────┴────────┴────────┴────────┴────────┴───────────┴──────────┴─────────┘
┌───────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┬─────────┐
│ Stat │ 1% │ 2.5% │ 50% │ 97.5% │ Avg │ Stdev │ Min │
├───────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ Req/Sec │ 490 │ 826 │ 1,006 │ 1,643 │ 1,129.3 │ 234.69 │ 490 │
├───────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤
│ Bytes/Sec │ 10.4 MB │ 17.4 MB │ 21.3 MB │ 34.7 MB │ 23.9 MB │ 4.96 MB │ 10.3 MB │
└───────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘
Req/Bytes counts sampled once per second.
# of samples: 60
69k requests in 60.04s, 1.43 GB read
90 errors (90 timeouts)
```
### After
```
Running 60s test @ http://localhost:4202
100 connections with 10 pipelining factor
┌─────────┬────────┬────────┬────────┬─────────┬───────────┬───────────┬─────────┐
│ Stat │ 2.5% │ 50% │ 97.5% │ 99% │ Avg │ Stdev │ Max │
├─────────┼────────┼────────┼────────┼─────────┼───────────┼───────────┼─────────┤
│ Latency │ 471 ms │ 831 ms │ 889 ms │ 1668 ms │ 835.91 ms │ 467.89 ms │ 9720 ms │
└─────────┴────────┴────────┴────────┴─────────┴───────────┴───────────┴─────────┘
┌───────────┬─────────┬─────────┬─────────┬─────────┬──────────┬────────┬─────────┐
│ Stat │ 1% │ 2.5% │ 50% │ 97.5% │ Avg │ Stdev │ Min │
├───────────┼─────────┼─────────┼─────────┼─────────┼──────────┼────────┼─────────┤
│ Req/Sec │ 390 │ 860 │ 1,145 │ 1,572 │ 1,156.77 │ 222.65 │ 390 │
├───────────┼─────────┼─────────┼─────────┼─────────┼──────────┼────────┼─────────┤
│ Bytes/Sec │ 8.24 MB │ 18.2 MB │ 24.2 MB │ 33.2 MB │ 24.4 MB │ 4.7 MB │ 8.24 MB │
└───────────┴─────────┴─────────┴─────────┴─────────┴──────────┴────────┴─────────┘
Req/Bytes counts sampled once per second.
# of samples: 60
71k requests in 60.03s, 1.47 GB read
140 errors (140 timeouts)
```
PR Close#61392
This aligns with how angular/components marks their hidden APIs.
`@nodoc` has been broken since the switch to adev, this change should
properly hide the APIs again.
PR Close#61196
As part of the Bazel toolchain migration we noticed that implicit types
generated by the TypeScript compiler sometimes end up referencing types
from other packages (i.e. cross-package imports).
These imports currently work just because the Bazel `ts_library` and
`ng_module` rules automatically inserted a `<amd-module
name="@angular/x" />` into `.d.ts` of packages. This helped TS figure
out how to import a given file. Notably this is custom logic that is not
occuring in vanilla TS or Angular compilations—so we will drop this
magic as part of the toolchain cleanup!
To improve code quality and keep the existing behavior working, we are
doing the following:
- adding a lint rule that reduces the risk of such imports breaking. The
failure scenario without the rule is that API goldens show unexpected
diffs, and types might be duplicated in a different package!
- keeping the `<amd-module` headers, but we manually insert them into
the package entry-points. This should ensure we don't regress
anywhere; while we also improved general safety around this above.
Long-term, isolated declarations or a lint rule from eslint-typescript
can make this even more robust.
PR Close#61316
We don't need this tooling anymore because we are already validating
that there are no circular dependencies via the `ng-dev` tooling that
checks `.ts` files directly.
Also these tests never actually failed to my knowledge.
PR Close#61209
Prior to this commit, `hasHttpTransferCacheOptions` was calculated immediately after the `featuresKind` set was declared, which was always defaulted to `false`.
PR Close#60605
Previously, `platformBrowserTesting` did not include any `platformBrowser` providers, causing an inconsistency with `platformBrowserDynamicTesting`.
This update resolves the issue by restructuring platform inheritance to ensure proper provider inclusion:
- `platformCore → platformBrowser → platformBrowserTesting`
- `platformBrowser → platformBrowserDynamic → platformBrowserDynamicTesting`
Now, `platformBrowserTesting` correctly inherits from `platformBrowser`, aligning with the expected behavior.
PR Close#60480
This commit moves `DOMTestComponentRenderer` to `@angular/platform-browser/testing`, allowing the Angular CLI to eliminate its dependency on `@angular/platform-browser-dynamic`, which would no longer be required for new projects.
PR Close#60453
Uses `ngServerMode` to automatically disable browser animations on the server. This allows us to decouple `platform-server` from the animations package.
PR Close#59762
Implemented functionality to prepend the baseHref to `sourceMappingURL` in CSS content. Added handling to ensure external sourcemaps are loaded relative to the baseHref. Corrected sourcemap URL behavior when accessing pages with multi-segment URLs (e.g., `/foo/bar`). Ensured that when the baseHref is set to `/`, maps are requested from the correct path (e.g., `http://localhost/comp.css.map` instead of `http://localhost/foo/bar/comp.css.map`).
Closes#59729
PR Close#59730
Fixes that the async animations renderer didn't have the logic to clean up its style cache during HMR. This is identical to #59393.
Fixes#59640.
PR Close#59644
Rolls back the changes from #59514 because they ended up being breaking in 1P. We can revisit the internal fix in a different way.
Fixes#59558.
PR Close#59557
In this commit, we replace `isPlatformServer` runtime call with the `ngServerMode` in the `transferCacheInterceptorFn` in order to make the functionality tree-shakable between client and server bundles.
PR Close#59439
Currently when we swap out the component during HMR, we remove the renderer from the cache, but we never destroy it which means that its styles are still in the DOM. This can cause the old styles to leak into the component after they're replaced. These changes add a `destroy` call to ensure that they're removed.
PR Close#59514
In this commit, we switch from decorators (which also produce redundant metadata, such as in the
`declareFactory` instruction) to the `inject` function to drop the `BROWSER_MODULE_PROVIDERS_MARKER`
token in production. This token is actually provided only in development mode but is still
referenced in the constructor due to the `@Inject(BROWSER_MODULE_PROVIDERS_MARKER)` decorator.
PR Close#59412
Injecting the `Console` is redundant because it directly calls the global `console` object.
There is no reason to reference this class in Hammer gestures, as it is only used in development
mode. We can safely call the `console` object directly.
PR Close#59409
When we replace a component during HMR, we clear it from the cache of the renderer factory, however when using animations, there's an animation-specific renderer factory that wraps the base DOM one and was preventing the cache from being cleared.
These changes rework the logic that clear the cache to go through a method so we can forward the call to the delegated factory.
PR Close#59393
In https://github.com/angular/components/pull/30179 the CDK overlay started depending on the `Renderer2Factory`. Since the overlay is used in the `MatSnackbar` which is commonly used in error handlers, `Overlay` can end up being injected as a part of the app initialization. Because `AsyncAnimationRendererFactory` depends on the `ChangeDetectionScheduler`, it may cause a circular dependency.
These changes inject the `ChangeDetectionScheduler` lazily to avoid the error.
Note: this will also be resolved by #58984, but I decided to send it out, because:
1. #58984 seems to be stuck on some internal cleanup.
2. The `AsyncAnimationRendererFactory` doesn't need the `scheduler` eagerly anyway so the change is fairly safe.
Fixes#59255.
PR Close#59256
SSR generated component styles used in development environments will add
external styles via link elements to the HTML. However, the runtime would
previously not collect these link elements for reuse with rendered components.
This would result in two copies of the link elements present in the DOM. In
isolation this is not problematic as it is only present in development mode.
Unfortunately, the Vite-based CSS HMR functionality used by the Angular CLI
only updates the first stylesheet it finds and leaves other instances of the
stylesheet in place. This behavior causes the styles to be left in an
inconsistent state. This could be considered a defect within Vite as it should
update all relevant styles to maintain consistency but ideally there should
not be two instances in the Angular SSR case. To avoid the Vite issue, the
runtime will now collect SSR generated external styles and reuse them.
PR Close#59031
Angular components that use ShadowDOM view encapsulation have an alternate
execution path for adding component styles to the DOM that does not use the
SharedStylesHost that all other view encapsulation modes leverage. To ensure
that ShadowDOM components receive all defined styles, additional logic has been
added to the ShadowDOM specific renderer to also cover external styles.
PR Close#58482
add helper functions provideAppInitializer, provideEnvironmentInitializer & providePlatformInitializer
to respectively simplify and replace the use of APP_INITIALIZER, ENVIRONMENT_INITIALIZER, PLATFORM_INITIALIZER
add a migration for the three initialiers
PR Close#53152
Removed two typos in the withHttpTransferCacheOptions function description.
- Corrected spelling of "whether"
- Changed spelling from "a an" to "an"
PR Close#58244
BREAKING CHANGE: The deprecated `BrowserModule.withServerTransition` method has been removed. Please use the `APP_ID` DI token to set the application id instead.
PR Close#58062
In order to investigate the performances of SSR, this commit introduces a benchmark suite which will measure several step of the rendering.
PR Close#57647
The shared style host now has the capability to add component styles as
link elements with external style references. This is currently unused
within the runtime but is an enabling feature for upcoming features such
as automatic component style HMR and development server deferred
stylesheet processing. Instead of inline style content that is then
added to a `style` element for each host node, a `link` element with a
stylesheet `rel` attribute and a `href` attribute can now be created.
The development server must be configured to provide the relevant
component stylesheet upon request. The Angular CLI development server
will provide this functionality once this capability is enabled.
Since the primary use of this capability is development mode and will
not be used for production code, server (SSR) style reuse is currently
not yet implemented but may be implemented in the future.
A component feature is used to provide the DOM renderer access to any
external styles that were emitted at compile time. When external styles
are present, the `getExternalStyles` function will be present on the
runtime component metadata object. The DOM render will use this function
to access and encapsulate the external style URLs as required by the
component.
PR Close#57922
The `SharedStylesHost` class has been refactored to further reduce
the runtime code size. SSR generated component styles are now added directly
into the usage records to avoid the need for additional data structures and
lookups when adding a component style. The code reduction in a prerelease
newly generated Angular CLI application for production is ~190 bytes.
Before:
```
Initial chunk files | Names | Raw size | Estimated transfer size
main-3X2VHGTM.js | main | 208.26 kB | 56.30 kB
polyfills-FFHMD2TL.js | polyfills | 34.52 kB | 11.28 kB
styles-5INURTSO.css | styles | 0 bytes | 0 bytes
| Initial total | 242.78 kB | 67.58 kB
```
After:
```
Initial chunk files | Names | Raw size | Estimated transfer size
main-MGOZ6Q4F.js | main | 208.07 kB | 56.26 kB
polyfills-FFHMD2TL.js | polyfills | 34.52 kB | 11.28 kB
styles-5INURTSO.css | styles | 0 bytes | 0 bytes
| Initial total | 242.59 kB | 67.54 kB
```
PR Close#57951
The `SharedStylesHost` class has been refactored to both reduce the runtime
code size and also modernize some of the code structures. The class is also
adjusted to better support reuse via subclassing or other reuses in the future.
Additional comments have been added to improve readability as well.
The code reduction in a prerelease newly generated Angular CLI application
for production is ~410 bytes.
Before:
```
Initial chunk files | Names | Raw size | Estimated transfer size
main-GOQKBZBZ.js | main | 208.67 kB | 56.41 kB
polyfills-FFHMD2TL.js | polyfills | 34.52 kB | 11.28 kB
styles-5INURTSO.css | styles | 0 bytes | 0 bytes
| Initial total | 243.19 kB | 67.69 kB
```
After:
```
Initial chunk files | Names | Raw size | Estimated transfer size
main-CRTDDKPH.js | main | 208.26 kB | 56.32 kB
polyfills-FFHMD2TL.js | polyfills | 34.52 kB | 11.28 kB
styles-5INURTSO.css | styles | 0 bytes | 0 bytes
| Initial total | 242.78 kB | 67.61 kB
```
PR Close#57834
This commit drops the `@developerPreview` annotation from the `withEventReplay()` function, which effectively makes the Event Replay feature stable.
PR Close#57895
In some cases apps need to schedule a bit later the loading of the animation module. This private token will allow to investigate which other strategy could be useful.
PR Close#57493
These changes replace most usages of `removeChild` with `remove`. The latter has the advantage of not having to look up the `parentNode` and ensure that the child being removed actually belongs to the specific parent.
The refactor should be fairly safe since all the browsers we cover support `remove`. [Something similar was done in Components](https://github.com/angular/components/pull/23592) some time ago and there haven't been any bug reports as a result.
PR Close#57203
