This commit updates scripts within `packages/core/test` to relative imports as a prep work to the
upcoming infra updates.
PR Close#60227
PR Close#60556
By removing the standalone feature, we reduce the amount of code generated for components but at the cost of including the `StandaloneService` in the main bundle even if no standalone components are included in it.
PR Close#58288
We had some tests that were leaking LViews, because we were testing things like `createComponent`, but not destroying them afterwards. These changes clean up most of them, although there are a handful still left that I didn't have time to fully track down.
PR Close#57546
When a view has the `Dirty` flag and is reattached, we should ensure that it is
reached and refreshed during the next change detection run from above.
In addition, when a view is created and attached, we should ensure that it is reached
and refreshed during change detection. This can happen if the view is
created and attached outside a change run or when it is created and
attached after its insertion view was already checked. In both cases, we
should ensure that the view is reached and refreshed during either the
current change detection or the next one (if change detection is not
already running).
We can achieve this by creating all views with the `Dirty` flag set.
However, this does happen to be a breaking change in some scenarios.
The one identified internally was actually depending on change detection
_not_ running immediately because it relied on an input value that was
set using `ngModel`. Because `ngModel` sets its value in a `Promise`, it
is not available until the _next_ change detection cycle. Ensuring
created views run in the current change change detection will result in
different behavior in this case.
fixes#52928fixes#15634
BREAKING CHANGE: Newly created and views marked for check and reattached
during change detection are now guaranteed to be refreshed in that same
change detection cycle. Previously, if they were attached at a location
in the view tree that was already checked, they would either throw
`ExpressionChangedAfterItHasBeenCheckedError` or not be refreshed until
some future round of change detection. In rare circumstances, this
correction can cause issues. We identified one instance that relied on
the previous behavior by reading a value on initialization which was
queued to be updated in a microtask instead of being available in the
current change detection round. The component only read this value during
initialization and did not read it again after the microtask updated it.
PR Close#54735
Template pipeline is now the default template compiler.
A pair of source map tests is failing, related to DI in JIT mode; I will fix and re-enable these during the preview period.
PR Close#54571
When a view has the `Dirty` flag and is reattached, we should ensure that it is
reached and refreshed during the next change detection run from above.
In addition, when a view is created and attached, we should ensure that it is reached
and refreshed during change detection. This can happen if the view is
created and attached outside a change run or when it is created and
attached after its insertion view was already checked. In both cases, we
should ensure that the view is reached and refreshed during either the
current change detection or the next one (if change detection is not
already running).
We can achieve this by creating all views with the `Dirty` flag set.
However, this does happen to be a breaking change in some scenarios.
The one identified internally was actually depending on change detection
_not_ running immediately because it relied on an input value that was
set using `ngModel`. Because `ngModel` sets its value in a `Promise`, it
is not available until the _next_ change detection cycle. Ensuring
created views run in the current change change detection will result in
different behavior in this case.
Making option the default is the solution to #52928. That will have to
wait for a major version.
PR Close#53022
The `base64-js` package was only used in tests that were run only on
Node.js. On Node.js, `Buffer` is available which can natively perform
base64 conversion. By using `Buffer in these Node.js only tests, the
`base64-js` package can be removed from the repository.
PR Close#53464
A lot of our tests are wrapped in `{}` which serves no purpose, aside from increasing the nesting level and, in some cases, causing confusion. The braces appear to be a leftover from a time when all tests were wrapped in a `function main() {}`. The function declaration was removed in #21053, but the braces remained, presumably because it was easier to search&replace for `function main()`, but not to remove the braces at the same time.
PR Close#52239
A runtime error will be thrown if a non-standalone component is being rendered without its NgModule loaded in the browser. This error is thrown only in dev mode and only if the Angular option `forbidOrphanComponents` is set to true. The error contains useful info to find the orphan component in the source code.
PR Close#52061
Previously effects were queued as they became dirty, and this queue was
flushed at various checkpoints during the change detection cycle. The result
was that change detection _was_ the effect runner, and without executing CD,
effects would not execute. This leads a particular tradeoff:
* effects are subject to unidirectional data flow (bad for dx)
* effects don't cause a new round of CD (good/bad depending on use case)
* effects can be used to implement control flow efficiently (desirable)
This commit changes the scheduling mechanism. Effects are now scheduled via
the microtask queue. This changes the tradeoffs:
* effects are no longer limited by unidirectional data flow (easy dx)
* effects registered in the Angular zone will trigger CD after they run
(same as `Promise.resolve` really)
* the public `effect()` type of effect probably isn't a good building block
for our built-in control flow, and we'll need a new internal abstraction.
As `effect()` is in developer preview, changing the execution timing is not
considered breaking even though it may impact current users.
PR Close#51049
To match the behaviour of Array.filter, typeguards can now be used on QueryList.filter to narrow the return type.
Fixes#38446
BREAKING CHANGE: QueryList.filter now supports type guard functions, which will result in type narrowing. Previously if you used type guard functions, it resulted in no changes to the return type. Now the type would be narrowed, which might require updates to the application code that relied on the old behavior.
PR Close#48042
`entryComponents` have been deprecated since version 9, because with Ivy they weren't necessary. These changes remove any remaining references.
BREAKING CHANGE:
* `entryComponents` has been deleted from the `@NgModule` and `@Component` public APIs. Any usages can be removed since they weren't doing anyting.
* `ANALYZE_FOR_ENTRY_COMPONENTS` injection token has been deleted. Any references can be removed.
PR Close#49484
The source map tests rely on asynchronous logic from the `source-map`
package. The tests itself are written using `fakeAsync` but this
unnecessarily complicates the interaction with the asynchronous
source-map helpers/package.
To fix this, we just make the tests use async/await as we don't intend
to test fakeAsync in this `describe` block..
PR Close#46888
The source-map package now requires the
`SourceMapConsumer`/`SourceMapGenerator` classes to be instantiated
asynchronously. This commit updates our tests to account for that.
PR Close#46888
We throw an error when a directive is trying to extend a component, but we don't actually say which class is responsible which can be difficult to track down. These changes add the two class names to the error message.
PR Close#45658
Updates us to version 4.0 of Jasmine and fixes some errors that were the result of us depending upon deprecated APIs. We need to do this both to stay up to date and because it was going to break eventually, because one of the Bazel packages was logging a deprecation warning that version 4.0 was required.
There were also some cases where the state of `ngDevMode` had started leaking out between tests.
PR Close#45558
Updates us to version 4.0 of Jasmine and fixes some errors that were the result of us depending upon deprecated APIs. We need to do this both to stay up to date and because it was going to break eventually, because one of the Bazel packages was logging a deprecation warning that version 4.0 was required.
There were also some cases where the state of `ngDevMode` had started leaking out between tests.
PR Close#45558
Angular contains an NgModule registry, which allows a user to declare
NgModules with string ids and retrieve them via those ids, using the
`getNgModuleById` API.
Previously, we attempted to structure this registration in a clever fashion
to allow for tree-shaking of registered NgModules (that is, those with ids).
This sort of worked due to the accidental alignment of behaviors from the
different tree-shakers involved. However, this trick relies on the
generation of `.ngfactory` files and how they're specifically processed in
various bundling scenarios. We intend to remove `.ngfactory` files, hence
we can no longer rely on them in this way.
The correct solution here is to recognize that `@NgModule({id})` is
inherently declaring a global side-effect, and such classes should not
really be eligible for tree-shaking in the first place. This commit removes
all the old registration machinery, and standardizes on generating a side-
effectful call to `registerNgModuleType` for NgModules that have ids.
There is some risk here that NgModules with unnecessary `id`s may not
tree-shake as a result of this change, whereas they would have in previous
circumstances. The fix here should be to remove the `id` if it's not needed.
Specifying an `id` is a request that the NgModule be retained regardless of
any other references, in case it is later looked up by string id.
PR Close#45024
In templates with several levels of nested nodes, it's common for several `elementStart`/`elementEnd` instructions to show up in a row which can be optimized away.
These changes add chaining support for `elementStart`, `elementEnd`, `elementContainerStart` and `elementContainerEnd` to shave off some bytes when possible.
PR Close#44994
This commit finishes the removal of View Engine from the codebase, deleting
those pieces of @angular/compiler which were only used for VE.
Co-Authored-By: JoostK <joost.koehoorn@gmail.com>
PR Close#44368
Bundle spec files similar to how it is done within the Angular
Components repo. This should simplify the setup and also speed
up the Saucelab job as only a single spec bundle would need to be
downloaded, compared to having to load hundreds of files through the
Saucelabs tunnel.
Also makes a couple of tests more robust with the emulators/and accounts
for ES2015 test runner changes. The tests should be less reluctant to
such build process changes.
Note for reviewers: Some imports have been simplified here. This work
came from Joey's original WIP for this. It's unclear to me whether this
is still needed, but it sounded like this was necessary for the ESBuild
bundling to work. I have robusted the module resolution plugin though,
so I doubt it's still needed. At the same time though: Not worth
reverting/trying as these changes are nice to have anyway!
Co-Authored-By: Joey Perrott <josephperrott@gmail.com>
Co-Authored-By: Paul Gschwendtner <paulgschwendtner@gmail.com>
PR Close#44281
Cleans up all the tests that had to declare a separate module in order to pass in `entryComponents` when creating components dynamically. This covers almost all of the `entryComponents` usages, except for a few which I've left for now, because they're testing some of the existing leftover `entryComponents` logic in core.
PR Close#44276
