In one of the earlier commits, the logic that appends `=$event` before parsing two-way bindings was removed and some validation was added to prevent unassignable expressions from being used. This ended up being problematic, because previously the parser was incorrectly allowing some invalid expressions which users came to depend on. For example, it transformed `[(value)]="a && a.b"` to `a && (a.b = $event)`.
These changes add some special cases for the common breakages that came up during the TGP.
PR Close#54154
Currently the listener side two-way listeners are parsed by appending `=$event` to the raw expression. This is problematic, because:
1. It can interfere with other expressions (see #37809).
2. It can lead to confusing error messages because users will see code that they didn't write.
3. It doesn't allow us to further manipulate the expression.
These changes remove the logic that appends `=$event` to resolve the issue. There's also some new logic that checks the expression after it has been parsed to ensure that the result is an assignable expression.
Subsequent commits will update the code that emits the expression to add back the `$event` assignment where it's needed.
PR Close#54154
During the template parsing stage two-way bindings are split up into a property and event binding. All the downstream code treats these binding the same as their one-way equivalents. For some future work we'll have to distinguish between the two so these changes update the `BoundElementProperty.type` and `ParsedEvent.type` to include a `TwoWay` type. All existing call-sites have been updated to treat `TwoWay` the same as `Property`/`Regular`, but more specialized logic will be added in the future.
PR Close#54065
When blocks were initially implemented, they were represented as containers in the i18n AST. This is problematic, because block affect the structure of the message.
These changes introduce a new `BlockPlaceholder` AST node and integrate it into the i18n pipeline. With the new node blocks are represented with the `START_BLOCK_<name>` and `CLOSE_BLOCK_<name>` placeholders.
PR Close#52958
Adds the logic to create `defer`-specific AST nodes from the generic HTML `BlockGroup` and `Block`. The logic for parsing the triggers will be in the next commit.
PR Close#51050
.substr() is deprecated so we replace it with functions which work similarily but aren't deprecated
Signed-off-by: Tobias Speicher <rootcommander@gmail.com>
PR Close#45397
When parsing interpolations, the input string is _decoded_ from what was
in the orginal template. This means that we cannot soley rely on the input
string to compute source spans because it does not necessarily reflect
the exact content of the original template. Specifically, when there is
an HTML entity (i.e. ` `), this will show up in its decoded form
when processing the interpolation (' '). We need to compute offsets
using the original _encoded_ string.
Note that this problem only surfaces in the splitting of interpolations.
The spans to this point have already been tracked accurately. For
example, given the template ` <div></div>`, the source span for the
`div` is already correctly determined to be 6. Only when we encounter
interpolations with many parts do we run into situations where we need
to compute new spans for the individual parts of the interpolation.
PR Close#44811
For two-way-bindings that use the banana-in-a-box syntax, the compiler
synthesizes an event assignment expression from the primary expression.
It is valid for the primary expression to be terminated by the non-null
operator, however naive string substitution is used for the synthesized
expression, such that the `!` would immediately precede the `=` token,
resulting in the valid `!=` operator token. The expression would still
parse correctly but it doesn't implement the proper semantics, resulting
in incorrect runtime behavior.
Changing the expression substitution to force a space between the
primary expression and the assignment avoids this mistake, but it
uncovers a new issue. The grammar does not allow for the LHS of an
assignment to be the non-null operator, so the synthesized expression
would fail to parse. To alleviate this, the synthesized expression is
parsed with a special parser flag to allow for this syntax.
Fixes#36551
PR Close#37809
This commit improves the null-safety of the ng-content selector and
updates a comment that turned out to be slightly inaccurate.
Closes#38407
PR Close#44411
This commit finishes the removal of View Engine from the codebase, deleting
those pieces of @angular/compiler which were only used for VE.
Co-Authored-By: JoostK <joost.koehoorn@gmail.com>
PR Close#44368
After updating to a more recent version of rollup, rollup started to
complain because the `TreeParseResult` class is being re-exported
twice in the `index.ts -> public-api.ts -> compiler.ts` entry-point.
Rollup threw errors like:
```
Error: "ParseTreeResult" cannot be exported from
<..>/ml_parser/parser.mjs as it is a re-export that references itself.
```
It seems like Rollup ideally would not throw here, similar to TypeScript
which detects that these exports are the same and just dedupes them, but
it's low-effort fixing this for now and actually is a good opportunity
to make the public API a little more easy understand (when looking at
the `compiler.ts` file).
PR Close#43431
If the template parse option `leadingTriviaChars` is configured to
consider whitespace as trivia, any trailing whitespace of an element
would be considered as leading trivia of the subsequent element, such
that its `start` span would start _after_ the whitespace. This means
that the start span cannot be used to mark the end of the current
element, as its trailing whitespace would then be included in its span.
Instead, the full start of the subsequent element should be used.
To harden the tests that for the Ivy parser, the test utility `parseR3`
has been adjusted to use the same configuration for `leadingTriviaChars`
as would be the case in its production counterpart `parseTemplate`. This
uncovered another bug in offset handling of the interpolation parser,
where the absolute offset was computed from the start source span
(which excludes leading trivia) whereas the interpolation expression
would include the leading trivia. As such, the absolute offset now also
uses the full start span.
Fixes#39148
PR Close#40513
We should provide the completion when the cursor is in the attribute
name after the `@` and `animate-`, but now the `KeySpan` starts from the
`@` or `animate-`. For example, the animation event `(@name.done)="v"`,
we can know where the cursor is by the `KeySpan` of `name.done` exactly,
it's in the event name or in the phase name.
PR Close#40347
Now when the animation trigger output event is missing its phase value name, the `BoundEvent` will be ignored,
but it's useful for completion in language service.
PR Close#39925
Though we currently have the knowledge of where the `key` for an
event binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
This is essentially identical to the change from #38898, but for event
bindings rather than input bindings.
PR Close#39609
The lexer is able to skip leading trivia in the `start` location of tokens.
This makes the source-span more friendly since things like elements
appear to begin at the start of the opening tag, rather than at the
start of any leading whitespace, which could include newlines.
But some tooling requires the full source-span to be available, such
as when tokenizing a text span into an Angular expression.
This commit simply adds the `fullStart` location to the `ParseSourceSpan`
class, and ensures that places where such spans are cloned, this
property flows through too.
PR Close#39486
Prior to this change, expressions within ICUs would have a source span
corresponding with the whole ICU. This commit narrows down the source
spans of these expressions to the exact location in the source file, as
a prerequisite for reporting type check errors within these expressions.
PR Close#39072
Currently it is impossible to determine the source of a binding that
generates `BoundAttribute` because all bound attributes generated from a
microsyntax expression share the same source span.
For example, in
```html
<div *ngFor="let item of items; trackBy: trackByFn"></div>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
source span for all `BoundAttribute`s generated from microsyntax
```
the `BoundAttribute` for both `ngForOf` and `ngForTrackBy`
share the same source span.
A lot of hacks were necessary in View Engine language service to work
around this limitation. It was done by inspecting the whole source span
then figuring out the relative position of the cursor.
With this change, we introduce a flag to set the binding span as the
source span of the `ParsedProperty` in Ivy AST.
This flag is needed so that we don't have to change VE ASTs.
Note that in the binding parser, we already set `bindingSpan` as the
source span for a `ParsedVariable`, and `keySpan` as the source span for
a literal attribute. This change makes the Ivy AST more consistent by
propagating the binding span to `ParsedProperty` as well.
PR Close#39036
Though we currently have the knowledge of where the `key` for an
attribute binding appears during parsing, we do not propagate this
information to the output AST. This means that once we produce the
template AST, we have no way of mapping a template position to the key
span alone. The best we can currently do is map back to the
`sourceSpan`. This presents problems downstream, specifically for the
language service, where we cannot provide correct information about a
position in a template because the AST is not granular enough.
PR Close#38898
In a microsyntax expressions, some attributes are not bound after
desugaring. For example,
```html
<div *ngFor="let item of items">
</div>
```
gets desugared to
```html
<ng-template ngFor let-items [ngForOf]="items">
</ngtemplate>
```
In this case, `ngFor` should be a literal attribute with no RHS value.
Therefore, its source span should be just the `keySpan` and not the
source span of the original template node.
This allows language service to precisely pinpoint different spans in a
microsyntax to provide accurate information.
PR Close#38766
Previously, the `startSourceSpan` property could be null
but in reality it is always well defined - except for a legacy
case in the old i18n extraction/merging code, where the
typings for source-spans are already being undermined.
Making this property non-null, simplifies code elsewhere
in the project.
PR Close#38581
This property can actually be `null` when called from the language-service.
This change allows us to remove the use of `!` to subvert the type system.
PR Close#36741
This commit propagates the correct value span in an ExpressionBinding of
a microsyntax expression to ParsedProperty, which in turn porpagates the
span to the template ASTs (both VE and Ivy).
PR Close#36133
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
This commit adds fine-grained text spans to TemplateBinding for microsyntax expressions.
1. Source span
By convention, source span refers to the entire span of the binding,
including its key and value.
2. Key span
Span of the binding key, without any whitespace or keywords like `let`
The value span is captured by the value expression AST.
This is part of a series of PRs to fix source span mapping in microsyntax expression.
For more info, see the doc https://docs.google.com/document/d/1mEVF2pSSMSnOloqOPQTYNiAJO0XQxA1H0BZyESASOrE/edit?usp=sharing
PR Close#35897
TemplateAst values are currently typed as the base class AST, but they
are actually constructed with ASTWithSource. Type them as such, because
ASTWithSource gives more information about the consumed expression AST
to downstream customers (namely, the expression AST source).
Unblocks #35271
PR Close#35892
Currently, would-be binding attributes that are missing binding names
are not parsed as bindings, and fall through as regular attributes. In
some cases, this can lead to a runtime error; trying to assign `#` as a
DOM attribute in an element like in `<div #></div>` fails because `#` is
not a valid attribute name.
Attributes composed of binding prefixes but not defining a binding
should be considered invalid, as this almost certainly indicates an
unintentional elision of a binding by the developer. This commit
introduces error reporting for attributes with a binding name prefix but
no actual binding name.
Closes https://github.com/angular/vscode-ng-language-service/issues/293.
PR Close#34595
Expressions in an inline template binding are improperly recorded as
spaning an offset calculated from the start of the template binding
attribute key, whereas they should be calculated from the start of the
attribute value, which contains the actual binding AST.
PR Close#31813
Previously the compiler would ignore everything in the attribute
name after the first dot. For example
<div [attr.someAttr.attrSuffix]="var"></div>
is turned into <div someAttr="varValue"></div>.
This commit ensures that whole attribute name is captured.
Now <div [attr.someAttr.attrSuffix]="var"></div>
is turned into <div someAttr.attrSuffix="varValue"></div>
PR Close#32256
Previously, we had tested that expressions parsed in a Render3 AST
had correctly-defined absolute spans (spans relative to the entire
template, not the local expression). Sometimes we use Template ASTs
rather than Render3 ASTs, and it's desirable to test for correct
expression spans in the template parser as well.
Adding these tests resolved one bug, similar to the one fixed in
fd4fed14d8, where expressions in the value
of a template attribute were not given an absolute span corresponding to
the start of the attribute name rather than the start of the attribute
value.
The diff on this commit is large, partially because it involves some
structural changes of the template parser testing layout. In particular,
the following is done:
1. Move `createMeta*`-like functions from `template_parser_spec.ts` to
be exported from a new test utility file.
2. Create an `ExpressionSourceHumanizer`, similar to the one created in
b04488d692, to allow convenient testing
of expressions' locations.
3. Create `template_parser_absolute_span_spec.ts`, testing the spans of
expressions parsed by the template parser. This is very similar to
the `r3_ast_absolute_span_spec`.
PR Close#33253
Prior to this commit, the absolute spans (relative to template source
file rather than the start of an expression) of expressions in a
template attribute like `*ngIf` were generated incorrectly, equating to
the relative spans.
This fixes the bug by passing an `absoluteOffset` parameter when parsing
template bindings.
Through some levels of indirection, this is required for the Language
Service to support text replacement in
https://github.com/angular/angular/pull/33091.
PR Close#33189
Template AST nodes for (bound) attributes, variables and references will
now retain a reference to the source span of their value, which allows
for more accurate type check diagnostics.
PR Close#30181
Currently, template expressions and statements have their location
recorded relative to the HTML element they are in, with no handle to
absolute location in a source file except for a line/column location.
However, the line/column location is also not entirely accurate, as it
points an entire semantic expression, and not necessarily the start of
an expression recorded by the expression parser.
To support record of the source code expressions originate from, add a
new `sourceSpan` field to `ASTWithSource` that records the absolute byte
offset of an expression within a source code.
Implement part 2 of [refactoring template parsing for
stability](https://hackmd.io/@X3ECPVy-RCuVfba-pnvIpw/BkDUxaW84/%2FMA1oxh6jRXqSmZBcLfYdyw?type=book).
PR Close#31391
As part of FW-1265, the `@angular/compiler` package is made compatible
with the TypeScript `--strict` flag. This already unveiled a few bugs,
so the strictness flag seems to help with increasing the overall code health.
Read more about the strict flag [here](https://www.typescriptlang.org/docs/handbook/compiler-options.html)
PR Close#30993
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
During build time we remap particular property bindings, because their names don't match their attribute equivalents (e.g. the property for the `for` attribute is called `htmlFor`). This breaks down if the particular element has an input that has the same name, because the property gets mapped to something invalid.
The following changes address the issue by mapping the name during runtime, because that's when directives are resolved and we know all of the inputs that are associated with a particular element.
PR Close#28765
When template bindings are being parsed the event handlers
were receiving a source span that included the whole attribute.
Now they get a span that is focussed on the handler itself.
PR Close#28055
This commit consolidates the options that can modify the
parsing of text (e.g. HTML, Angular templates, CSS, i18n)
into an AST for further processing into a single `options`
hash.
This makes the code cleaner and more readable, but also
enables us to support further options to parsing without
triggering wide ranging changes to code that should not
be affected by these new options. Specifically, it will let
us pass information about the placement of a template
that is being parsed in its containing file, which is essential
for accurate SourceMap processing.
PR Close#28055
Up until now, `[style]` and `[class]` bindings (the map-based ones) have only
worked as template bindings and have not been supported at all inside of host
bindings. This patch ensures that multiple host binding sources (components and
directives) all properly assign style values and merge them correctly in terms
of priority.
Jira: FW-882
PR Close#28246
