The migration was migrating all files in a project (like most migrations).
As there is no gain in migrating components used in test files. Excluding the test files reduces the migration noise.
PR Close#57317
The zoneless scheduler callback was executed in the root zone rather
than simply in `runOutsideAngular` to allow us to land the hybrid mode
change detection (scheduler always enabled, even for zones) without
breaking a ton of existing `fakeAsync` tests that could/would fail with
the "timer(s) still in queue" error. However, this caused another
problem: when a test executes inside `fakeAsync`, it cannot flush the
scheduled time. A similar problem exists with event and run coalescing (#56767).
This change would allow `fakeAsync` to flush the zoneless-scheduled
change detections and minimize breaking existing tests
by flushing pending timers at the end of the test, which actually now
matches what's done internally.
PR Close#56932
Updates the migration so that it passes the type as a generic in the case of `@Inject(SOME_TOKEN) foo: SomeType`. This is done for two reasons:
1. It's a fairly common pattern and it ensures that the code can still be compiled.
2. It avoids leaving behind unused imports.
PR Close#57389
This commit fixes an issue when hydration serialization tries to calculate DOM path to a content projection node (`<ng-content>`), but such nodes do not have DOM representation.
Resolves#56750.
PR Close#57383
Makes it so the inject migration preserves the optional token when declaring a parameter. This came up in some testing as something that can be potentially breaking for classes that implement interfaces.
PR Close#57367
This commit fixes an issue that happens when an i18n block is defined as a projectable content, but a parent component doesn't project it. With an extra check added in this commit, the code will be taking a regular "creation" pass instead of attempting hydration.
Resolves#57301.
PR Close#57356
Signal inputs are no longer updated by assignment, unlike `@Input()`, so
a good practice is adding `readonly` for the `InputSignal`— which should
never be swapped out.
This is a safe operation because the migration skips all inputs that are
being written anyway.
PR Close#57368
In some cases, the migration can detect when `input()` as a shorthand
may be usable. This commit adds such detection and migrates inputs to
this form when possible.
PR Close#57368
Components with `jit: true` are not processed by the Angular compiler,
so we cannot ask the template checker for the parsed template; simply
because the template wasn't attempted to be parsed.
We still can migrate simple cases of such components, commonly seen in
unit tests. We do this by manually parsing the template and making use
of the reference fallback resolution that is also used for host bindings
(where we don't have any type check block information).
PR Close#57347
Instead of exposing just the `ts.CompilerOptions`, we should expose the
actual Angular compiler options throuhgout the signal input migration.
This will be useful for parsing templates, in cases of JIT-opted
components.
PR Close#57347
As of this commit, the migration will also inspect safe property reads
and migrate them, if they reference an input that is being migrated.
PR Close#57318
Instead of revisiting each source file, and each of its child nodes
twice, we now visit them together using a grouped AST visitor that only
traverses each source file once.
This seemed to speed up migration by 6-8% locally, but is likely
noticable better with large compilation scopes.
PR Close#57318
Instead of fiddling manually with the imports, which worked well, but
comes at a cost of complexity— we are now using the canonical import
manager. This simplifies deletion, insertion and updating of imports.
Notably, our import manager is not super great at preserving whitespaces
right now, but we assume a formatter runs over migrated code anyway.
PR Close#57318
Introduces a best effort mode for the signal input migration. This mode
can be used to aggresively migrate as much as possible, ignoring most
of the incompatibility reasons, like "writes to the input".
PR Close#57318
By default, we don't migrate inputs if they are part of e.g. `@if` for
now. That is because we don't have the template narrowing feature
available yet.
To improve impact of the migration until we have the narrowing, we add
some additional checks that allow us to migrate instances of inputs that
are part of e.g. `@if` but are actually not used inside (and hence are
guaranteed to be _not_ narrowed).
PR Close#57308
PR Close#57323
This commit updates serialization and hydration i18n logic to take into account situations when i18n blocks are located within "skip hydration" blocks.
Resolves#57105.
PR Close#57299
Previously, if a component injects a `ViewContainerRef`, the post-hydration cleanup process doesn't visit inner views to cleanup dehydrated views in nested LContainers. This commit updates the logic to recognize this situation and enter host LView to complete cleanup.
Resolves#56989.
PR Close#57300
This commit updates the inside/outside NgZone detection of the hybrid CD
scheduling to track the actual instance of the NgZone being used rather
than the name "Angular" (how `isInsideAngularZone` works). This allows
the scheduling to work correctly when there are multiple versions of
Angular running on the page.
fixes#57261
PR Close#57267
Currently in some scenarios the compiler generates code like `null as any ? foo : bar` which will be invalid with [an upcoming TypeScript change](https://devblogs.microsoft.com/typescript/announcing-typescript-5-6-beta/#disallowed-nullish-and-truthy-checks). These changes switch to generating `0 as any` which is exempt from the change.
**Note:** I'm not starting the work to fully get us on TS 5.6 until the 18.2 release comes out, but this change is necessary to unblock an internal team.
PR Close#57303
This changes the migration so that we don't generate `_1` suffixes when
a temporary variable wouldn't conflict with any variables in the lexical
scope.
In addition, if we discover conflicts, we try alternative suffixes that
seem more natural and follow style guides. E.g. `Value`, `Val` or
`Input`.
PR Close#57292
Currently we use some short variable names like `t` and `r` in the generated factory functions. They can conflict with local symbols with the same names, if they're used for DI.
These changes rename the parameters to reduce the change for conflicts.
Fixes#57168.
PR Close#57181
This commit addresses a performance bottleneck in the `interpolatedSignalNotInvoked` extended
diagnostic by querying directive metadata instead of consulting the type-checker to determine if
a property binding corresponds with an input.
Fixes#57287
PR Close#57291
These changes replace most usages of `removeChild` with `remove`. The latter has the advantage of not having to look up the `parentNode` and ensure that the child being removed actually belongs to the specific parent.
The refactor should be fairly safe since all the browsers we cover support `remove`. [Something similar was done in Components](https://github.com/angular/components/pull/23592) some time ago and there haven't been any bug reports as a result.
PR Close#57203
From the internal issue on the matter:
> When using the standard Jasmine version of it promises returned by the body function are automatically awaited. The Catalyst version of it is fake-async, so awaiting the promise does not make sense; however it would be nice if Catalyst automatically flushed the promise to replicate the experience of using standard it. This would allow users to do the following:
```
it('should fail later', async () => {
await new Promise(r => setTimeout(r));
fail('failure');
});
```
> In Catalyst today the above test will pass. If this proposal to automatically flush the resulting promise were implemented it would fail.
Flushing after the tests complete has been the default behavior inside
Google since 2020. Very few tests remain that use the old behavior of
only flushing microtasks. The example above would actually fail with
`fakeAsync` due to the pending timer, but the argument still remains the
same. We might as well just flush if we're going to fail the test
anyways by throwing if there's no flush at the end.
BREAKING CHANGE: `fakeAsync` will now flush pending timers at the end of
the given function by default. To opt-out of this, you can use `{flush:
false}` in options parameter of `fakeAsync`
PR Close#57240
From the internal issue on the matter:
> When using the standard Jasmine version of it promises returned by the body function are automatically awaited. The Catalyst version of it is fake-async, so awaiting the promise does not make sense; however it would be nice if Catalyst automatically flushed the promise to replicate the experience of using standard it. This would allow users to do the following:
```
it('should fail later', async () => {
await new Promise(r => setTimeout(r));
fail('failure');
});
```
> In Catalyst today the above test will pass. If this proposal to automatically flush the resulting promise were implemented it would fail.
Flushing after the tests complete has been the default behavior inside
Google since 2020. Very few tests remain that use the old behavior of
only flushing microtasks. The example above would actually fail with
`fakeAsync` due to the pending timer, but the argument still remains the
same. We might as well just flush if we're going to fail the test
anyways by throwing if there's no flush at the end.
PR Close#57239
Similar to a previous fix that intended to make the JIT transforms
compatible with pre-transforms like e.g. Tsickle, we need to solve
an additional issue where the class properties are synthetic and result
in an `getSourceFile() => undefined` invocation that breaks the import
insertion, causing errors like:
```
TypeError: Cannot read properties of undefined (reading 'fileName')
```
PR Close#57262
From the internal issue on the matter:
> When using the standard Jasmine version of it promises returned by the body function are automatically awaited. The Catalyst version of it is fake-async, so awaiting the promise does not make sense; however it would be nice if Catalyst automatically flushed the promise to replicate the experience of using standard it. This would allow users to do the following:
```
it('should fail later', async () => {
await new Promise(r => setTimeout(r));
fail('failure');
});
```
> In Catalyst today the above test will pass. If this proposal to automatically flush the resulting promise were implemented it would fail.
Flushing after the tests complete has been the default behavior inside
Google since 2020. Very few tests remain that use the old behavior of
only flushing microtasks. The example above would actually fail with
`fakeAsync` due to the pending timer, but the argument still remains the
same. We might as well just flush if we're going to fail the test
anyways by throwing if there's no flush at the end.
PR Close#57137
Angular's template files are not valid TypeScript. Attempting to get suggestion
diagnostics from the underlying TypeScript language service will result in
a large amount of false positives. Only actual TypeScript files should
be analyzed by the underlying TypeScript language service for suggestions.
PR Close#56241
This commit adds an option to specify the default value for
`queryParamsHandling` in `Router.createUrlTree` when another option is
not specified (or is `null|undefined`).
resolves#12664
PR Close#57198
This was an old feature that mapped shift + click (et al) to "clickmod". This doesn't really make sense to add to Angular, so let's remove it.
PR Close#57201
