BREAKING CHANGE: previously deprecated @Component.directives and @Component.pipes support was removed.
All the components and pipes now must be declarated via an NgModule. NgModule is the basic
compilation block passed into the Angular compiler via Compiler#compileModuleSync or #compileModuleAsync.
Because of this change, the Compiler#compileComponentAsync and #compileComponentSync were removed as well -
any code doing compilation should compile module instead using the apis mentioned above.
Lastly, since modules are the basic compilation unit, the ngUpgrade module was modified to always require
an NgModule to be passed into the UpgradeAdapter's constructor - previously this was optional.
ngc can now validate metadata before emitting to verify it doesn't
contain an error symbol that will result in a runtime error if
it is used by the StaticReflector.
To enable this add the section,
"angularCompilerOptions": {
"strictMetadataEmit": true
}
to the top level of the tsconfig.json file passed to ngc.
Enabled metadata validation for packages that are intended to be
used statically.
Often it is useful to test a component without rendering certain directives/components
in its template because these directives require some complicated setup.
You can do that by using NO_ERRORS_SCHEMA.
TestBed.configureTestingModule({
schemas: [NO_ERRORS_SCHEMA]
});
This would disable all schema checks in your tests.
Closes#10503
It is possible for code in `beforeEach` to capture and fork a zone
(for example creating `NgZone` in `beforeEach`). Subsequently the code
in `it` may chose to do `fakeAsync`. The issue is that because the
code in `it` can use `NgZone` from the `beforeEach`. it effectively can
escape the `fakeAsync` zone. A solution is to run all of the test in
`ProxyZone` which allows a test to dynamically replace the rules at any
time. This allows the `beforeEach` to fork a zone, and then `it` to
retroactively became `fakeAsync` zone.
Remove TestComponentBuilder, addProviders, and withProviders. These
were deprecated in rc5 - see the changelog for update information.
Note - this does not actually remove the functions, but makes them
internal only. They will be removed from the codebase entirely
at a later time.
Closes#9751
BREAKING CHANGE:
These forms of providers are no longer accepted:
bind(MyClass).toFactory(...)
new Provider(MyClass, toFactory: ...)
We now only accept:
{provider: MyClass, toFactory: ...}
BREAKING CHANGE: previously deprecated SystemJsComponentResolver and SystemJsCmpFactoryResolver have been removed.
Please follow deprecation instructions to migrate your code.
BREAKING CHANGE: previously deprecated coreBootstrap and coreLoadAndBootstrap have been removed.
Please follow deprecation instructions to migrate your code.
BREAKING CHANGE: previously deprecated DirectiveMetadataType#properties and DirectiveMetadataType#events were removed; see deprecation notice for migration instructions.
BREAKING CHANGE:
The deprecated `provideForms()` and `disableDeprecatedForms()` functions have been removed. Please import the `FormsModule` or the `ReactiveFormsModule` from @angular/forms instead.
BREAKING CHANGE:
The deprecated forms APIs in @angular/common have been removed. Please update to the new forms API in @angular/forms. See angular.io for more information.
Closes#9729
BREAKING CHANGE:
`Type` is now `Type<T>` which means that in most cases you have to
use `Type<any>` in place of `Type`.
We don't expect that any user applications use the `Type` type.
Remove test setup functions which were deprecated in rc5. See the
changelog for rc5 for how to update. In brief, instead of
`setBaseTestProviders`, use `TestBed.initTestEnvironment`.
We changed the bootstrap order:
1. create NgZone
2. bootstrap ng1 inside NgZone and upgrade ng1 components to ng2 components.
3. bootstrap ng2 with NgZone
Note: Previous footgun behavior was: bootstrap ng2 first to extract NgZone, so that ng1 bootstrap can happen in NgZone. This meant that if ng2 bootstrap eagerly compiled a component which contained ng1 components, then we did not have complete metadata.
Currently in the `linker/compiler.ts` file, the **same identifier** is used in **two declarations**:
```typescript
export type CompilerOptions = { … }
…
export const CompilerOptions = new OpaqueToken('compilerOptions');
```
This breaks the API doc generation. I’m surprised that this was not flagged by the tsc.
The duplicate declaration was introduced in 46b212706b.
Because
- `Form` is **exported** -- see line 30/31 of
`modules/@angular/forms/src/forms.ts`: i.e., <br>`export {Form} from
'./directives/form_interface'`; and
- Methods of `Form`, which are public, have an
`AbstractFormGroupDirective` parameter;
e.g.,<br>`Form.getFormGroup(dir: AbstractFormGroupDirective):
FormGroup`.
Then it makes sense for `AbstractFormGroupDirective` to be
public/exported too. In any case, if it isn't exported then the **API
docs for `Form` don't get generated properly.**
This makes `bootstrapModuleFactory` wait for promises
returned by `APP_INITIALIZER`s, also making `bootstrapModuleFactory` async.
I.e. now `bootstrapModule` and `bootstrapModuleFactory` behave in the
same way.
This ensures that all code from module instantiation, to creating
`ApplicationRef`s as well as calling `APP_INITIALIZERS` is run
in the Angular zone.
This also moves the invocation of the initializers from the `ApplicationRef`
constructor into the `bootstrapModuleFactory` call, allowing initializers
to get a hold of `ApplicationRef` (see #9101).
Fixes#9101Fixes#10363Fixes#10205
Prior to this fix [ngClass] would remove all dynamic classes
when destroyed. It's essential that classes are persisted such
that remove-based animations will still be stylistically correct.
This patch fixes this issue.
Closes#10008Closes#10303
This contains major changes to the compiler, bootstrap of the platforms
and test environment initialization.
Main part of #10043Closes#10164
BREAKING CHANGE:
- Semantics and name of `@AppModule` (now `@NgModule`) changed quite a bit.
This is actually not breaking as `@AppModules` were not part of rc.4.
We will have detailed docs on `@NgModule` separately.
- `coreLoadAndBootstrap` and `coreBootstrap` can't be used any more (without migration support).
Use `bootstrapModule` / `bootstrapModuleFactory` instead.
- All Components listed in routes have to be part of the `declarations` of an NgModule.
Either directly on the bootstrap module / lazy loaded module, or in an NgModule imported by them.
This removes the magic from the `inject` test helper that would inspect
the current zone and would only work with our `async` test helper.
Now, `inject` is always synchronous, and if you are using a module
that requires async precompilation, you're required to call
`doAsyncPrecompilation` in your tests.
This is part of the breaking changes introduced with the swap
to each test having an AppModule.
Closes#9975Closes#9593
BREAKING CHANGE:
`TestInjector` is now renamed to `TestBed`
Before:
```js
import {TestInjector, getTestInjector} from '@angular/core/testing';
```
After:
```js
import {TestBed, getTestBed} from '@angular/core/testing';
```
The testing_e2e util does not belong in platform-browser and was never
intended to be a public API. Move it out of that whole tree.
BREAKING CHANGE:
The following API was never intended to be public and is removed:
```js
import {verifyNoBrowserErrors} from '@angular/platform-browser/testing_e2e';
```
Consider using Protractor's console plugin: https://github.com/angular/protractor-console-plugin
This change reverts the removal of setBaseTestProviders that was
introduced in 8d746e3f67.
Instead, setBaseTestProviders and the providers provided from
`@angular/platform-browser-dynamic/testing` and `@angular/server/testing`
will still work for the next release, but are deprecated.
See 8d746e3f67 for how to upgrade.
BREAKING CHANGE (deprecations)
- Instead of `coreBootstrap`, create an `@AppModule` and use `bootstrapModule`.
- Instead of `coreLoadAndBootstarp`, create an `@AppModule` and use `bootstrapModuleFactory`.
- Instead of `bootstrapWorkerApp`, create an `@AppModule` that includes the `WorkerAppModule` and use `bootstrapModule` with the `workerAppPlatform()`.
- Instead of `bootstrapWorkerUi`, create an @AppModule that includes the `WorkerUiModule` and use `bootstrapModule` with the `workerUiPlatform()` instead.
- Instead of `serverBootstrap`, create an @AppModule and use `bootstrapModule` with the `serverDynamicPlatform()` instead.
- Instead of `PLATFORM_PIPES` and `PLATFORM_DIRECTIVES`, provide platform directives/pipes via an `@AppModule`.
- Instead of `ComponentResolver`:
- use `ComponentFactoryResolver` together with `@AppModule.precompile`/`@Component.precompile` or `ANALYZE_FOR_PRECOMPILE` provider for dynamic component creation.
- use `AppModuleFactoryLoader` for lazy loading.
- Instead of `SystemJsComponentResolver`, create an `@AppModule` and use `SystemJsAppModuleLoader`.
- Instead of `SystemJsCmpFactoryResolver`, create an `@AppModule` and use `SystemJsAppModuleFactoryLoader`
Closes#9726
- Introduces `CompilerFactory` which can be part of a `PlatformRef`.
- Introduces `WorkerAppModule`, `WorkerUiModule`, `ServerModule`
- Introduces `serverDynamicPlatform` for applications using runtime compilation
on the server.
- Changes browser bootstrap for runtime and offline compilation (see below for an example).
* introduces `bootstrapModule` and `bootstrapModuleFactory` in `@angular/core`
* introduces new `browserDynamicPlatform` in `@angular/platform-browser-dynamic
- Changes `initTestEnvironment` (which used to be `setBaseTestProviders`) to not take a compiler factory any more (see below for an example).
BREAKING CHANGE:
## Migration from `setBaseTestProviders` to `initTestEnvironment`:
- For the browser platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS} from ‘@angular/platform-browser-dynamic/testing’;
setBaseTestProviders(TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS);
```
AFTER:
```
import {initTestEnvironment} from ‘@angular/core/testing’;
import {browserDynamicTestPlatform,
BrowserDynamicTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
BrowserDynamicTestModule,
browserDynamicTestPlatform());
```
- For the server platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS} from ‘@angular/platform-server/testing/server’;
setBaseTestProviders(TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS);
```
AFTER:
```
import {initTestEnvironment} from ‘@angular/core/testing’;
import {serverTestPlatform,
ServerTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
ServerTestModule,
serverTestPlatform());
```
## Bootstrap changes
```
@AppModule({
modules: [BrowserModule],
precompile: [MainComponent],
providers: […], // additional providers
directives: […], // additional platform directives
pipes: […] // additional platform pipes
})
class MyModule {
constructor(appRef: ApplicationRef) {
appRef.bootstrap(MainComponent);
}
}
// offline compile
import {browserPlatform} from ‘@angular/platform-browser’;
import {bootstrapModuleFactory} from ‘@angular/core’;
bootstrapModuleFactory(MyModuleNgFactory, browserPlatform());
// runtime compile long form
import {browserDynamicPlatform} from ‘@angular/platform-browser-dynamic’;
import {bootstrapModule} from ‘@angular/core’;
bootstrapModule(MyModule, browserDynamicPlatform());
```
Closes#9922
Part of #9726
Introduces the new `ANALYZE_FOR_PRECOMPILE` token. This token can be used to
create a virtual provider that will populate the `precompile` fields of
components and app modules based on its
`useValue`. All components that are referenced in the `useValue`
value (either directly or in a nested array or map) will be added
to the `precompile` property.
closes#9874
related to #9726
Closes#9732
BREAKING CHANGE:
We have removed the deprecated form directives from the built-in platform directive list, so apps are not required to package forms with their app. This also makes forms friendly to offline compilation.
Instead, we have exposed three modules:
OLD API:
- `DeprecatedFormsModule`
NEW API:
- `FormsModule`
- `ReactiveFormsModule`
If you provide one of these modules, the default forms directives and providers from that module will be available to you app-wide. Note: You can provide both the `FormsModule` and the `ReactiveFormsModule` together if you like, but they are fully-functional separately.
**Before:**
```ts
import {disableDeprecatedForms, provideForms} from @angular/forms;
bootstrap(App, [
disableDeprecatedForms(),
provideForms()
]);
```
**After:**
```ts
import {DeprecatedFormsModule} from @angular/common;
bootstrap(App, {modules: [DeprecatedFormsModule] });
```
-OR-
```ts
import {FormsModule} from @angular/forms;
bootstrap(App, {modules: [FormsModule] });
```
-OR-
```ts
import {ReactiveFormsModule} from @angular/forms;
bootstrap(App, {modules: [ReactiveFormsModule] });
```
You can also choose not to provide any forms module and run your app without forms.
Or you can choose not to provide any forms module *and* provide form directives at will. This will allow you to use the deprecatedForms API for some components and not others.
```
import {FORM_DIRECTIVES, FORM_PROVIDERS} from @angular/forms;
@Component({
selector: some-comp,
directives: [FORM_DIRECTIVES],
providers: [FORM_PROVIDERS]
})
class SomeComp
```
Every test now has an implicit module. It can be configured via `configureModule` (from @angular/core/testing)
to add providers, directives, pipes, ...
The compiler now has to be configured separately via `configureCompiler` (from @angular/core/testing)
to add providers or define whether to use jit.
BREAKING CHANGE:
- Application providers can no longer inject compiler internals (i.e. everything
from `@angular/compiler). Inject `Compiler` instead. This reflects the
changes to `bootstrap` for module support (3f55aa609f).
- Compiler providers can no longer be added via `addProviders` / `withProviders`.
Use the new method `configureCompiler` instead.
- Platform directives / pipes need to be provided via
`configureModule` and can no longer be provided via the
`PLATFORM_PIPES` / `PLATFORM_DIRECTIVES` tokens.
- `setBaseTestProviders()` was renamed into `initTestEnvironment` and
now takes a `PlatformRef` and a factory for a
`Compiler`.
- E.g. for the browser platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS} from ‘@angular/platform-browser-dynamic/testing’;
setBaseTestProviders(TEST_BROWSER_DYNAMIC_PLATFORM_PROVIDERS,
TEST_BROWSER_DYNAMIC_APPLICATION_PROVIDERS);
```
AFTER:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {browserTestCompiler, browserDynamicTestPlatform,
BrowserDynamicTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
browserTestCompiler,
browserDynamicTestPlatform(),
BrowserDynamicTestModule);
```
- E.g. for the server platform:
BEFORE:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS} from ‘@angular/platform-server/testing/server’;
setBaseTestProviders(TEST_SERVER_PLATFORM_PROVIDERS,
TEST_SERVER_APPLICATION_PROVIDERS);
```
AFTER:
```
import {setBaseTestProviders} from ‘@angular/core/testing’;
import {serverTestCompiler, serverTestPlatform,
ServerTestModule} from ‘@angular/platform-browser-dynamic/testing’;
initTestEnvironment(
serverTestCompiler,
serverTestPlatform(),
ServerTestModule);
```
Related to #9726Closes#9846
This introduces the `BrowserModule` to be used for long form
bootstrap and offline compile bootstrap:
```
@AppModule({
modules: [BrowserModule],
precompile: [MainComponent],
providers: […], // additional providers
directives: […], // additional platform directives
pipes: […] // additional platform pipes
})
class MyModule {
constructor(appRef: ApplicationRef) {
appRef.bootstrap(MainComponent);
}
}
// offline compile
import {bootstrapModuleFactory} from ‘@angular/platform-browser’;
bootstrapModuleFactory(MyModuleNgFactory);
// runtime compile long form
import {bootstrapModule} from ‘@angular/platform-browser-dynamic’;
bootstrapModule(MyModule);
```
The short form, `bootstrap(...)`, can now creates a module on the fly,
given `directives`, `pipes, `providers`, `precompile` and `modules`
properties.
Related changes:
- make `SanitizationService`, `SecurityContext` public in `@angular/core` so that the offline compiler can resolve the token
- move `AnimationDriver` to `platform-browser` and make it
public so that the offline compiler can resolve the token
BREAKING CHANGES:
- short form bootstrap does no longer allow
to inject compiler internals (i.e. everything
from `@angular/compiler). Inject `Compiler` instead.
To provide custom providers for the compiler,
create a custom compiler via `browserCompiler({providers: [...]})`
and pass that into the `bootstrap` method.
This implements a new class, QueryEncoder, that provides
methods for encoding keys and values of query parameter.
The encoder encodes with encodeURIComponent, and then
decodes a whitelist of allowed characters back to their
unencoded form.
BREAKING CHANGE:
The changes to Http's URLSearchParams serialization now
prevent encoding of these characters inside query parameters
which were previously converted to percent-encoded values:
@ : $ , ; + ; ? /
The default encoding behavior can be overridden by extending
QueryEncoder, as documented in the URLSearchParams service.
Fixes#9348
Adds new abstraction `Compiler` with methods
`compileComponentAsync` and `compileComponentSync`.
This is in preparation of deprecating `ComponentResolver`.
`compileComponentSync` is able to compile components
synchronously given all components either have an inline
template or they have been compiled before.
Also changes `TestComponentBuilder.createSync` to
take a `Type` and use the new `compileComponentSync` method.
Also supports overriding the component metadata even if
the component has already been compiled.
Also fixes#7084 in a better way.
BREAKING CHANGE:
`TestComponentBuilder.createSync` now takes a component type
and throws if not all templates are either inlined
are compiled before via `createAsync`.
Closes#9594
- ts-api-guardian will now error if a new public symbol is added with a stability marker (`@stable`, `@experimental`, `@deprecated`)
- DomEventsPlugin and KeyEventsPlugin were removed from public api surface - these classes is an implementation detail
- deprecated BROWSER_PROVIDERS was removed completely
- `@angular/compiler` was removed from the ts-api-guardian check since this package shouldn't contain anything that users need to directly import
- the rest of the api surface was conservatively marked as stable or experimental
BREAKING CHANGES: DomEventsPlugin and KeyEventsPlugin previously exported from core are no longer public - these classes are implementation detail.
Previously deprecated BROWSER_PROVIDERS was completely removed from platform-browser.
Closes#9236Closes#9235
Ref #9234
Instead, the async function now determines whether it should return a promise
or instead call a done function parameter. Importing Jasmine functions
from `@angular/core/testing` is no longer necessary and is now deprecated.
Additionally, beforeEachProviders is also deprecated, as it is specific
to the testing framework. Instead, use the new addProviders method directly.
Before:
```js
import {beforeEachProviders, it, describe, inject} from 'angular2/testing/core';
describe('my code', () => {
beforeEachProviders(() => [MyService]);
it('does stuff', inject([MyService], (service) => {
// actual test
});
});
```
After:
```js
import {addProviders, inject} from 'angular2/testing/core';
describe('my code', () => {
beforeEach(() => {
addProviders([MyService]);
});
it('does stuff', inject([MyService], (service) => {
// actual test
});
});
```
TestComponentBuilder now lives in core/testing. compiler/testing contains a private
OverridingTestComponentBuilder implementation which handles the private behavior
we need to override templates. This is part of the effort to simplify the testing
imports and hide compiler APIs.
Closes#9585
BREAKING CHANGE:
`TestComponentBuilder` is now imported from `@angular/core/testing`. Imports
from `@angular/compiler/testing` are deprecated.
Before:
```
import {TestComponentBuilder, TestComponentRenderer, ComponentFixtureAutoDetect} from '@angular/compiler/testing';
```
After:
```
import {TestComponentBuilder, TestComponentRenderer, ComponentFixtureAutoDetect} from '@angular/core/testing';
```
BREAKING CHANGE:
MockLocationStrategy was intended to be internal only and is now removed
from the `@angular/common/testing` public api.
Use `SpyLocation` from `@angular/common/testing` for location testing.
BREAKING CHANGE:
`ComponentFixture` will be moving out of `@angular/compiler/testing` to `@angular/core/testing` in
this release. For now, it is deprecated from `@angular/compiler/testing`.
Previously, we were exporting internal mocks and helpers. Move these
to core/testing/testing_internal or remove them if they were
never used.
Remove deprecated items - injectAsync, clearPendingTimers.
BREAKING CHANGE:
Remove the following APIs from `@angular/core/testing`, which have been deprecated or were
never intended to be publicly exported:
```
injectAsync
clearPendingTimers
Log
MockAppliacationHref
MockNgZone
clearPendingTimers
getTypeOf
instantiateType
```
Instead of `injectAsync`, use `async(inject())`.
`clearPendingTimers` is no longer required.
Mostly, removing things that were never intended to be exported publicy.
BREAKING CHANGE:
The following are no longer publicly exported APIs. They were intended as internal
utilities and you should use your own util:
```
browserDetection,
dispatchEvent,
el,
normalizeCSS,
stringifyElement,
expect (and custom matchers for Jasmine)
```
BREAKING CHANGES:
`containsRegexp` is no more exported from `@angular/core/testing`. It should not have been part of the public API in the first place.
BREAKING CHANGE: Parse5Adapter is no longer exported as public API, use serverBootstrap()
Parse5Adapter is an implementation detail not a public API
Closes#9237Closes#9205
After splitting the facades into multiple modules,
enabling prod mode for code had no effect for the compiler.
Also in a change between RC1 and RC2 we created the `CompilerConfig`
via a provider with `useValue` and not via a `useFactory`, which reads
the prod mode too early.
Closes#9318Closes#8508Closes#9318
Also modified static reflector to allow writing tests in using
the .ts and using the MetadataCollector.
Also made MetadataCollector be able to use SourceFiles that have
not been bound (that is, don't have the parent property set).
Fixes#9182Fixes#9265
This lets users continue using runtime-sideeffect Decorators if they choose,
only down-leveling the marked ones to Annotations.
Also remove the "skipTemplateCodegen" option, which is no longer needed
since Angular compiles with tsc-wrapped rather than ngc. The former doesn't
include any codegen.
"render" is gramatically incorrect and confusing to developers who used this api.
Since webworker apis were exposed only in master, renaming these before the rc2 release
is not a breaking change
Previously these symbols were exposed via platform-browser-dynamic, then we merged then into platform-browser
thinking that tools would know how to shake off the compiler and other dynamic bits not used with the offline
compilation flow. This turned out to be wrong as both webpack and rollup don't have good enough tree-shaking
capabilities to do this today. We think that in the future we'll be able to merge these two entry points into
one, but we need to give tooling some time before we can do it. In the meantime the reintroduction of the -dynamic
package point allows us to separate the compiler dependencies from the rest of the framework.
This change undoes the previous breaking change that removed the platform-browser-dynamic package.
The collector now collects the body of functions that return an
expression as a symbolic 'function'. The static reflector supports
expanding these functions statically to allow provider macros.
Also added support for the array spread operator in both the
collector and the static reflector.
Now that we have --noImplicitAny we don't need these checks for explicit types in specific locations.
Also re-enable the check to disallow keywords as variable names.
* Revert "fix(d.ts): enable angular2 compilation with TS flag --strictNullChecks (#8902)"
This reverts commit 7e352a27f7.
* test: add typescript test for our typings
currently this doesn't throw or break the build, first we need to resolve all
of the existing issues.
to run execute: ./tools/tree-shaking-test/test.sh
then inspect dist/tree-shaking/test/**/*.bundle.js
* test: add tree-shaking test
currently this doesn't throw or break the build, first we need to resolve all
of the existing issues.
to run execute: ./tools/tree-shaking-test/test.sh
then inspect dist/tree-shaking/test/**/*.bundle.js
* fix(http): remove peerDep on @angular/common
it is not needed there because it will get transitively installed by @angular/platform-browser
we only need to declare this dependency in tsconfig.json because tsconfig.json's
do not support transitive dependencies in this way.
StaticReflector provides more context on errors reported by the
collector.
The metadata collector now records the line and character of the node that
caused it to report the error.
Includes other minor fixes to error reporting and a wording change.
Fixes#8978Closes#9011
There is no need to expose this additional method inside of the Renderer
API. The functionality can be restored by looping and calling
`setElementStyle` instead.
Note that this change is changing code that was was introduced after
the last release therefore this fix is not a breaking change.
Closes#9000Closes#9009
The metadata collector was modified to look up references in the
import list instead of resolving the symbol using the TypeChecker
making the use of the TypeChecker vestigial. This change removes
all uses of the TypeChecker.
Modified the schema to be able to record global and local (non-module
specific references).
Added error messages to the schema and errors are recorded in
the metadata file allowing the static reflector to throw errors
if an unsupported construct is referenced by metadata.
Closes#8966Fixes#8893Fixes#8894
- many entry points were previously missing (e.g. all testing entry points, http, etc)
- upgrade ts-api-guardian to 0.0.3 that adds support for more api surface
- add all info to the spec that was surfaced by ts-api-guardian@0.0.3
This ensures we run in a clean directory, using our real distribution. It finds bugs like @internal
APIs needed to type-check in the offline compiler, as well as problems in package.json.
Also move tsc-wrapped under tools/@angular
This allows angular's build to depend on some extensions, but not on code generation, and breaks a cycle in the angular build
We now merge ts-metadata-collector into tsc-wrapped and stop publishing the former.
Added and used the cors middleware:
- add the module as a dev depedency in the package.json file
- require the module in the jsserve.js file
- add the module in the middleware list
Closes#7273Closes#7274
Summary:
This adds basic security hooks to Angular 2.
* `SecurityContext` is a private API between core, compiler, and
platform-browser. `SecurityContext` communicates what context a value is used
in across template parser, compiler, and sanitization at runtime.
* `SanitizationService` is the bare bones interface to sanitize values for a
particular context.
* `SchemaElementRegistry.securityContext(tagName, attributeOrPropertyName)`
determines the security context for an attribute or property (it turns out
attributes and properties match for the purposes of sanitization).
Based on these hooks:
* `DomSchemaElementRegistry` decides what sanitization applies in a particular
context.
* `DomSanitizationService` implements `SanitizationService` and adds *Safe
Value*s, i.e. the ability to mark a value as safe and not requiring further
sanitization.
* `url_sanitizer` and `style_sanitizer` sanitize URLs and Styles, respectively
(surprise!).
`DomSanitizationService` is the default implementation bound for browser
applications, in the three contexts (browser rendering, web worker rendering,
server side rendering).
BREAKING CHANGES:
*** SECURITY WARNING ***
Angular 2 Release Candidates do not implement proper contextual escaping yet.
Make sure to correctly escape all values that go into the DOM.
*** SECURITY WARNING ***
Reviewers: IgorMinar
Differential Revision: https://reviews.angular.io/D103
Also add a configuration switch to disable the codegen, so we can
still use the metadata emit and tsickle pre-processing in the
build pipeline for angular itself.
Before, we would create all fields in the generated views
with visibility `private`. This does not work if an embedded
view references a directive / element in a parent view.
In Dart, this was no problem so far as it does not have
a `private` modifier.
Before, `useValue` in a provider did not work when doing
offline compile, as so far the `MetadataResolver` was only
used for jit mode. Now, `useValue` supports any kind of value
that the static reflector can return. E.g. primitives,
arrays, string maps, …
Closes#8366
Most of the bugs discovered so far in the offline compiler were related to the StaticReflector. As it was part of angular2 core, it was hard to update. Moving it into the compiler_cli allows to release more often until the compiler_cli gets more stable.
Note: Moving the unit test next to the sources is the simplest option for now in terms of build setup.
Note: This commit only does the move. The next commit updates the build to run it again.
BREAKING CHANGE:
- ViewRef.changeDetectorRef was removed as using ChangeDetectorRefs
for EmbeddedViewRefs does not make sense. Use ComponentRef.changeDetectorRef
or inject ChangeDetectorRef instead.
Fixes#8242
BREAKING CHANGE:
- Before, a `EmbeddedViewRef` used to have methods for
setting variables. Now, a user has to pass in a context
object that represents all variables when an `EmbeddedViewRef`
should be created.
- `ViewContainerRef.createEmbeddedViewRef` now takes
a context object as 2nd argument.
- `EmbeddedViewRef.setLocal` and `getLocal` have been removed.
Use `EmbeddedViewRef.context` to access the context.
- `DebugNode.locals` has been removed. Use the new methods `DebugElement.references`
to get the references that are present on this element,
or `DebugElement.context` to get the context of the `EmbeddedViewRef` or the component to which the element belongs.
Closes#8321
The filename contains the module name as resolved by users, so the top-level module name is uneeded.
Module names on references are replaced by capturing the import syntax from the module.
This allows readers of the metadata to do the module resolution themselves.
Fixes#8225Fixes#8082Closes#8256
Introduces `ref-` to give a name to an element or a directive (also works for `<template>` elements), and `let-` to introduce an input variable for a `<template>` element.
BREAKING CHANGE:
- `#...` now always means `ref-`.
- `<template #abc>` now defines a reference to the TemplateRef, instead of an input variable used inside of the template.
- `#...` inside of a *ngIf, … directives is deprecated.
Use `let …` instead.
- `var-...` is deprecated. Replace with `let-...` for `<template>` elements and `ref-` for non `<template>` elements.
Closes#7158Closes#8264
Pure pipes as well as arrays and maps are
implemented via proxy functions. This is
faster than the previous implementation
and also generates less code.
BREAKING CHANGE:
- pipes now take a variable number of arguments, and not an array that contains all arguments.
Update the version of zone.js to @0.6.12 that contains the new FakeAsyncTestZoneSpec.
The new fakeAsync zone handles errors better and clearPendingTimers() is no longer required to be called after handling an error and is deprecated.
The fakeAsync test zone will now throw an error if an XHR is attemtped within the test since that cannot be controlled synchronously in the test(Need to be mocked out with a service implementation that doesn't involve XHRs).
This commit also allows fakeAsync to wrap inject to make it consistent with async test zone.
BREAKING CHANGE:
inject can no longer wrap fakeAsync while fakeAsync can wrap inject. So the order in existing tests with inject and fakeAsync has to be switched as follows:
Before:
```
inject([...], fakeAsync((...) => {...}))
```
After:
```
fakeAsync(inject([...], (...) => {...}))
```
Closes#8142
This changes Angular so that it can be used without reflection (assuming a codegen for injectors).
BREAKIKNG CHANGE:
- Drops `APP_COMPONENT` provider. Instead, inject
`ApplicationRef` and read its `componentTypes` property.
- long form bootstrap has changed into the following:
```
var platform = createPlatform(ReflectiveInjector.resolveAndCreate(BROWSER_PROVIDERS));
var appInjector =
ReflectiveInjector.resolveAndCreate([BROWSER_APP_PROVIDERS, appProviders], platform.injector);
coreLoadAndBootstrap(appInjector, MyApp);
```
BREAKING CHANGE:
- Injector was renamed into `ReflectiveInjector`,
as `Injector` is only an abstract class with one method on it
- `Injector.getOptional()` was changed into `Injector.get(token, notFoundValue)`
to make implementing injectors simpler
- `ViewContainerRef.createComponent` now takes an `Injector`
instead of `ResolvedProviders`. If a reflective injector
should be used, create one before calling this method.
(e.g. via `ReflectiveInjector.resolveAndCreate(…)`.
This adds the feature for `@ViewChild`/`@ViewChildren`/`@ContentChild`/`@ContentChildren` to define what to read from the queried element.
E.g. `@ViewChild(`someVar`, read: ViewContainerRef)` will locate the element with a variable `someVar` on it and return a `ViewContainerRef` for it.
Background: With this change, Angular knows exactly at which elements there will be `ViewConainerRef`s as the user has to ask explicitly of them. This simplifies codegen and will make converting Angular templates into server side templates simpler as well.
BREAKING CHANGE:
- `DynamicComponentLoader.loadIntoLocation` has been removed. Use `@ViewChild(‘myVar’, read: ViewContainerRef)` to get hold of a `ViewContainerRef` at an element with variable `myVar`.
- `DynamicComponentLoader.loadNextToLocation` now takes a `ViewContainerRef` instead of an `ElementRef`.
- `AppViewManager` is renamed into `ViewUtils` and is a mere private utility service.
Each compile template now exposes a `<CompName>NgFactory` variable
with an instance of a `ComponentFactory`.
Calling `ComponentFactory.create` returns a `ComponentRef` that can
be used directly.
BREAKING CHANGE:
- `Compiler` is renamed to `ComponentResolver`,
`Compiler.compileInHost` has been renamed to `ComponentResolver.resolveComponent`.
- `ComponentRef.dispose` is renamed to `ComponentRef.destroy`
- `ViewContainerRef.createHostView` is renamed to `ViewContainerRef.createComponent`
- `ComponentFixture_` has been removed, the class `ComponentFixture`
can now be created directly as it is no more using private APIs.
Instead of using injectAsync and returning a promise, use the `async` function
to wrap tests. This will run the test inside a zone which does not complete
the test until all asynchronous tasks have been completed.
`async` may be used with the `inject` function, or separately.
BREAKING CHANGE:
`injectAsync` is now deprecated. Instead, use the `async` function
to wrap any asynchronous tests.
Before:
```
it('should wait for returned promises', injectAsync([FancyService], (service) => {
return service.getAsyncValue().then((value) => { expect(value).toEqual('async value'); });
}));
it('should wait for returned promises', injectAsync([], () => {
return somePromise.then(() => { expect(true).toEqual(true); });
}));
```
After:
```
it('should wait for returned promises', async(inject([FancyService], (service) => {
service.getAsyncValue().then((value) => { expect(value).toEqual('async value'); });
})));
// Note that if there is no injection, we no longer need `inject` OR `injectAsync`.
it('should wait for returned promises', async(() => {
somePromise.then() => { expect(true).toEqual(true); });
}));
```
Closes#7735
BREAKING CHANGE:
- Renderer:
* renderComponent method is removed form `Renderer`, only present on `RootRenderer`
* Renderer.setDebugInfo is removed. Renderer.createElement / createText / createTemplateAnchor
now take the DebugInfo directly.
- Query semantics:
* Queries don't work with dynamically loaded components.
* e.g. for router-outlet: loaded components can't be queries via @ViewQuery,
but router-outlet emits an event `activate` now that emits the activated component
- Exception classes and the context inside changed (renamed fields)
- DebugElement.attributes is an Object and not a Map in JS any more
- ChangeDetectorGenConfig was renamed into CompilerConfig
- AppViewManager.createEmbeddedViewInContainer / AppViewManager.createHostViewInContainer
are removed, use the methods in ViewContainerRef instead
- Change detection order changed:
* 1. dirty check component inputs
* 2. dirty check content children
* 3. update render nodes
Closes#6301Closes#6567
To workaround https://github.com/Microsoft/TypeScript/issues/7573
we must remove the readonly keyword from generated .d.ts files.
This solution will not scale, but will probably buy enough time to require our users move to a 2.0 beta.
Closes#8003
process.env.TRAVIS_PULL_REQUEST contains a string and not a boolean value, so we need
to compare it to a string literal rather than do boolean arithmetics.
Instead of running with karma and the karma-dart shim, run dart
tests directly using the new package:test runner. This migrates
away from package:unittest.
Fixes a couple tests, mostly associated with depending on absolute
URLs or editing the test providers after an injector had already
been created.
Remove karma-dart and associated files. Change gupfiles to run tests
via `pub run test` instead.
@petebacondarwin deserves credit for most of this commit.
This allows you to specify a regex and serializer function instead
of the path DSL in your route declaration.
```
@RouteConfig([
{ regex: '[a-z]+.[0-9]+',
serializer: (params) => `{params.a}.params.b}`,
component: MyComponent }
])
class Component {}
```
Closes#7325Closes#7126
BREAKING CHANGE:
`OnPushObserve` was an experimental
feature for Dart and had
conceptual performance problems,
as setting up observables is slow.
Use `OnPush` instead.
BREAKING CHANGE:
In Dart we used to support injecting types with generics. As this feature is hard to implement with the upcoming codegen we are dropping it.
Merge cl/115454020 in G3 with this change.
Closes#7262
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
feat(pipes): add ReplacePipe for string manipulation
add commonly used pipe that is missing from framework.
Adding static pattern validation method to Validators
Adding a directive for the pattern validator
Applying clang-format rules to modified files
Updating public api spec for new pattern validator
Adding pattern validator to public api guard tool
For #5411Closes#5561
Despite local testing, multiple users failed to run the postinstall to install typings.
Instead, we can distribute the typings we installed locally.
This is an alternative to #7003.
This also reverts rxjs to beta.1 since we have errors using beta.2, being addressed
in #7001.
Fixes#7000
This resolves Duplicate Identifier issues seen by many users,
at the expense of more typings installation required in some
cases.
Removes the quickstart hack of placing all needed dependencies
typings files in our distribution. Removes dependencies on
nodejs from angular2/core.
Fixes#5973Fixes#5807Fixes#6266
Angular now depends on es6-promise and es6-collections
(and a handful of manual typings) rather than all of es6-shim.
Fixes#5242
We previously had an undocumented breaking change, this is now
documented in this commit.
Fixes#6817
BREAKING CHANGE:
Transitive typings are no longer included in the distribution.
You may need to install typings in your project using
http://github.com/typings/typings
Users now must rely on getting typings from:
- one of the peerDependencies, such as rxjs, which exposes
typings via the moduleResolution=node mechanism.
(see https://github.com/Microsoft/TypeScript/wiki/Typings-for-npm-packages)
This happens automatically.
- Using --target ES5 now requires manual installation of
es6-promise and es6-collections typings.
- Using some angular APIs may introduce a dependency on eg. nodejs
or jasmine, and those typings need manual installation as well.
Closes#6267
The upstream Jasmine typings don't define a type for the global
object with Jasmine methods polluting it, so just use any.
Also zone.js has a different name upstream.
Now, using `ng.probe(element)` in the browser console returns
a DebugElement when in dev mode.
`ComponentFixture#debugElement` also returns a new DebugElement.
Breaking Change:
This is a breaking change for unit tests. The API for the DebugElement
has changed. Now, there is a DebugElement or DebugNode for every node
in the DOM, not only nodes with an ElementRef. `componentViewChildren` is
removed, and `childNodes` is a list of ElementNodes corresponding to every
child in the DOM. `query` no longer takes a scope parameter, since
the entire rendered DOM is included in the `childNodes`.
Before:
```
componentFixture.debugElement.componentViewChildren[0];
```
After
```
// Depending on the DOM structure of your component, the
// index may have changed or the first component child
// may be a sub-child.
componentFixture.debugElement.children[0];
```
Before:
```
debugElement.query(By.css('div'), Scope.all());
```
After:
```
debugElement.query(By.css('div'));
```
Before:
```
componentFixture.debugElement.elementRef;
```
After:
```
componentFixture.elementRef;
```
