mirror of
https://github.com/beclab/Olares
synced 2026-05-23 00:38:25 +00:00
41 lines
1.3 KiB
Markdown
41 lines
1.3 KiB
Markdown
|
---
|
||
|
|
description: Complete guide to installing Olares on Raspberry Pi including hardware requirements, installation process, and system activation steps.
|
||
|
|
---
|
||
|
|
# Install Olares on Raspberry Pi
|
||
|
|
This guide explains how to install Olares on a Raspberry Pi.
|
||
|
|
|
||
|
|
:::warning Not recommended for production use
|
||
|
|
Currently, Olares on Raspberry Pi has certain limitations. We recommend using it only for development or testing purposes.
|
||
|
|
:::
|
||
|
|
<!--@include: ./reusables.md{41,47}-->
|
||
|
|
|
||
|
|
## System requirements
|
||
|
|
Make sure your Raspbian device meets the following requirements.
|
||
|
|
- Hardware: Raspberry Pi 4B or Raspberry Pi 5 with 8GB memory
|
||
|
|
- Operating system: Raspbian 12
|
||
|
|
- Storage: 64GB (SSD recommended)
|
||
|
|
|
||
|
|
## Set up system environment
|
||
|
|
1. Configure the Raspbian environment to enable necessary features:
|
||
|
|
|
||
|
|
```bash
|
||
|
|
echo "$(head -1 /boot/firmware/cmdline.txt) cgroup_enable=cpuset cgroup_enable=memory cgroup_memory=1" | sudo tee /boot/firmware/cmdline.txt
|
||
|
|
|
||
|
|
echo "kernel=kernel8.img" | sudo tee -a /boot/firmware/config.txt
|
||
|
|
```
|
||
|
|
|
||
|
|
2. Reboot your Raspbian device to apply the change.
|
||
|
|
|
||
|
|
```bash
|
||
|
|
sudo reboot
|
||
|
|
```
|
||
|
|
## Install Olares
|
||
|
|
Run the following command:
|
||
|
|
|
||
|
|
<!--@include: ./reusables.md{4,33}-->
|
||
|
|
|
||
|
|
<!--@include: ./activate-olares.md-->
|
||
|
|
|
||
|
|
<!--@include: ./log-in-to-olares.md-->
|
||
|
|
|
||
|
|
<!--@include: ./reusables.md{35,39}-->
|